main
Ray Publish 0.1.1 d89037f
{
  "schema_version": 1,
  "type": "component",
  "slug": "mc11s",
  "title": "MC11S",
  "brief": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "mc11s"
  ],
  "component": {
    "mpn": "MC11S",
    "manufacturer": "Mysentech",
    "package": "QFN-16(3x3)",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401171647_Mysentech-MC11S_C7472380.pdf",
    "parts": {
      "symbol": "mc11s.kicad_sym",
      "footprint": "mc11s.kicad_mod",
      "model_3d": "mc11s-hero.glb",
      "model_3d_plain": "mc11s.glb",
      "model_3d_step": "mc11s-etched.step",
      "model_3d_step_plain": "mc11s.step",
      "lbr": "mc11s.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Standard mode up to 400 kHz, fast mode up to 1000 kHz. Requires an external pull-up resistor to VDD."
      },
      {
        "number": "2",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data line (bidirectional, open-drain). Requires an external pull-up resistor to VDD."
      },
      {
        "number": "3",
        "name": "CLKIN",
        "type": "input",
        "description": "External counter clock input, 0.1 MHz to 50 MHz with 40-60% duty cycle. Tie to GND when the internal 2.4 MHz clock is selected via REF_CLK_SEL."
      },
      {
        "number": "4",
        "name": "ADDR",
        "type": "input",
        "description": "I2C slave address select input. Ties the device address to one of the supported values depending on the logic level applied."
      },
      {
        "number": "5",
        "name": "INTB",
        "type": "output",
        "description": "Interrupt / alert output, active low. Signals conversion-complete or alarm status depending on configuration."
      },
      {
        "number": "6",
        "name": "SD",
        "type": "input",
        "description": "Shutdown-mode enable input. Tie to GND when not used; drive high to force the chip into shutdown for lowest current (~40 nA)."
      },
      {
        "number": "7",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage, 2.0 V to 5.5 V (absolute max 5.5 V). Typical measurement peak current 0.8 mA, average 2.6 µA @ 1 Hz sample rate."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. Leave floating."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. Leave floating."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. Leave floating."
      },
      {
        "number": "12",
        "name": "VT",
        "type": "output",
        "description": "Analog negative-temperature-coefficient voltage output. Read externally by MCU ADC to derive die temperature for temperature compensation."
      },
      {
        "number": "13",
        "name": "C1N",
        "type": "passive",
        "description": "Channel 1 differential capacitive sense input (negative). Connects to the reference/second sensing capacitor; measures up to 1000 pF, driver current up to 3.2 mA per channel."
      },
      {
        "number": "14",
        "name": "C1P",
        "type": "passive",
        "description": "Channel 1 differential capacitive sense input (positive). Paired with C1N; typically used for the reference capacitor in differential mode."
      },
      {
        "number": "15",
        "name": "C0P",
        "type": "passive",
        "description": "Channel 0 differential capacitive sense input (positive). Paired with C0N; typically used for the sensed (DUT) capacitor."
      },
      {
        "number": "16",
        "name": "C0N",
        "type": "passive",
        "description": "Channel 0 differential capacitive sense input (negative). Paired with C0P for the sensed capacitor connection."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401171647_Mysentech-MC11S_C7472380.pdf",
        "pages": 33,
        "sha256": "a3d0a31e473acd20",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mc11s.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.9
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4bafaf1bb48873ff43b364918bf5e1f4278a211ad76791ed7928096d98c1768a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mc11s-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.9
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ab6a756b6f3e6eda6b4452530aee33a61df6bcd7a226b7bf9c43bd3e48dca2f8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Mysentech",
      "Package": "QFN-16(3x3)",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "variants": [
    {
      "mpn": "MC11S",
      "kind": "packaging"
    },
    {
      "mpn": "MC11T",
      "kind": "unknown"
    },
    {
      "mpn": "MC11L",
      "kind": "unknown"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mc11s"
  ],
  "discovery_pitch": "MC11S (Mysentech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mc11s.kicad_sym",
    "mc11s.kicad_mod",
    "mc11s.glb",
    "mc11s.step",
    "mc11s.lbr",
    "docs/hero.png",
    "docs/mc11s-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mc11s-etched.step",
    "mc11s-hero.glb",
    "mc11s-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-28T18:40:35.747Z",
  "description": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}