← Commit history
Publish 0.1.1
4 files changed
+645−11
mc11s-hero.glbadded⋯ 1 unchanged line ⋯
mc11s-hero.overlay.jsonadded+436@@ -0,0 +1,436 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MC11S",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 16,+ "span_mm": 4.25,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 16,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.3,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.5,+ 1.5,+ -1.5,+ 1.5+ ],+ "pads_bbox_mm": [+ -1.875,+ 1.875,+ -1.875,+ 1.875+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "mc11s-etched.glb",+ "glb_sha256": "92580cb6bc69eac2d58a5a88b33cc4f4057a996d0686af325e8af756dedc63c7",+ "footprint": "mc11s.kicad_mod",+ "footprint_sha256": "a3d269f5ee1aea476ed8cdd843754060965bd02d3aa7d6a1cdda8a7d046b2dd9",+ "pins": "page.json component.pins",+ "pins_sha256": "aea84627e27ef91dd8b7ff29e015fbf352bcba09463cab65a86ac8c76a7376c7"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "SCL",+ "x": -2.57,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "SDA",+ "x": -1.975,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "CLKIN",+ "x": -1.975,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "ADDR",+ "x": -1.94,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "INTB",+ "x": -0.75,+ "y": 1.94,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "SD",+ "x": -0.25,+ "y": 1.975,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "VDD",+ "x": 0.25,+ "y": 1.975,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "GND",+ "x": 0.75,+ "y": 1.94,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "NC",+ "x": 1.94,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "NC",+ "x": 1.975,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "NC",+ "x": 1.975,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "VT",+ "x": 1.94,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "C1N",+ "x": 0.75,+ "y": -1.94,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "C1P",+ "x": 0.25,+ "y": -1.975,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "15",+ "text": "C0P",+ "x": -0.25,+ "y": -1.975,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "16",+ "text": "C0N",+ "x": -0.75,+ "y": -1.94,+ "align": "left",+ "vertical": true,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "custom",+ "center_mm": [+ -1.4,+ -0.75+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -1.45,+ -0.25+ ],+ "size_mm": [+ 0.85,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -1.45,+ 0.25+ ],+ "size_mm": [+ 0.85,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "custom",+ "center_mm": [+ -1.45,+ 0.75+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "custom",+ "center_mm": [+ -0.75,+ 1.45+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -0.25,+ 1.2+ ],+ "size_mm": [+ 0.25,+ 1.35+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 0.25,+ 1.2+ ],+ "size_mm": [+ 0.25,+ 1.35+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "custom",+ "center_mm": [+ 0.75,+ 1.45+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "custom",+ "center_mm": [+ 1.45,+ 0.75+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 1.45,+ 0.25+ ],+ "size_mm": [+ 0.85,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 1.45,+ -0.25+ ],+ "size_mm": [+ 0.85,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "custom",+ "center_mm": [+ 1.45,+ -0.75+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "custom",+ "center_mm": [+ 0.75,+ -1.45+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 0.25,+ -1.2+ ],+ "size_mm": [+ 0.25,+ 1.35+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ -0.25,+ -1.2+ ],+ "size_mm": [+ 0.25,+ 1.35+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "custom",+ "center_mm": [+ -0.75,+ -1.45+ ],+ "size_mm": [+ 0.214645,+ 0.214645+ ],+ "rot": 0.0+ }+ ]+}
package.json+199−4@@ -1,6 +1,6 @@ { "slug": "mc11s",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,201 @@ "docs/hero.png", "docs/mc11s-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "mc11s-etched.step",+ "mc11s-hero.glb",+ "mc11s-hero.overlay.json"+ ],+ "component": {+ "mpn": "MC11S",+ "manufacturer": "Mysentech",+ "package": "QFN-16(3x3)",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401171647_Mysentech-MC11S_C7472380.pdf",+ "parts": {+ "symbol": "mc11s.kicad_sym",+ "footprint": "mc11s.kicad_mod",+ "model_3d": "mc11s-hero.glb",+ "model_3d_plain": "mc11s.glb",+ "model_3d_step": "mc11s-etched.step",+ "model_3d_step_plain": "mc11s.step",+ "lbr": "mc11s.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input. Standard mode up to 400 kHz, fast mode up to 1000 kHz. Requires an external pull-up resistor to VDD."+ },+ {+ "number": "2",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data line (bidirectional, open-drain). Requires an external pull-up resistor to VDD."+ },+ {+ "number": "3",+ "name": "CLKIN",+ "type": "input",+ "description": "External counter clock input, 0.1 MHz to 50 MHz with 40-60% duty cycle. Tie to GND when the internal 2.4 MHz clock is selected via REF_CLK_SEL."+ },+ {+ "number": "4",+ "name": "ADDR",+ "type": "input",+ "description": "I2C slave address select input. Ties the device address to one of the supported values depending on the logic level applied."+ },+ {+ "number": "5",+ "name": "INTB",+ "type": "output",+ "description": "Interrupt / alert output, active low. Signals conversion-complete or alarm status depending on configuration."+ },+ {+ "number": "6",+ "name": "SD",+ "type": "input",+ "description": "Shutdown-mode enable input. Tie to GND when not used; drive high to force the chip into shutdown for lowest current (~40 nA)."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage, 2.0 V to 5.5 V (absolute max 5.5 V). Typical measurement peak current 0.8 mA, average 2.6 µA @ 1 Hz sample rate."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave floating."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave floating."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave floating."+ },+ {+ "number": "12",+ "name": "VT",+ "type": "output",+ "description": "Analog negative-temperature-coefficient voltage output. Read externally by MCU ADC to derive die temperature for temperature compensation."+ },+ {+ "number": "13",+ "name": "C1N",+ "type": "passive",+ "description": "Channel 1 differential capacitive sense input (negative). Connects to the reference/second sensing capacitor; measures up to 1000 pF, driver current up to 3.2 mA per channel."+ },+ {+ "number": "14",+ "name": "C1P",+ "type": "passive",+ "description": "Channel 1 differential capacitive sense input (positive). Paired with C1N; typically used for the reference capacitor in differential mode."+ },+ {+ "number": "15",+ "name": "C0P",+ "type": "passive",+ "description": "Channel 0 differential capacitive sense input (positive). Paired with C0N; typically used for the sensed (DUT) capacitor."+ },+ {+ "number": "16",+ "name": "C0N",+ "type": "passive",+ "description": "Channel 0 differential capacitive sense input (negative). Paired with C0P for the sensed capacitor connection."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401171647_Mysentech-MC11S_C7472380.pdf",+ "pages": 33,+ "sha256": "a3d0a31e473acd20",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mc11s.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.9+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4bafaf1bb48873ff43b364918bf5e1f4278a211ad76791ed7928096d98c1768a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mc11s-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.9+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ab6a756b6f3e6eda6b4452530aee33a61df6bcd7a226b7bf9c43bd3e48dca2f8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "MC11S",+ "brief": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Mysentech",+ "Package": "QFN-16(3x3)",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "discovery_triggers": [+ "mc11s"+ ],+ "discovery_pitch": "MC11S (Mysentech) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "mc11s", "title": "MC11S", "brief": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -240,10 +240,13 @@ "docs/hero.png", "docs/mc11s-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "mc11s-etched.step",+ "mc11s-hero.glb",+ "mc11s-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-28T18:40:35.747Z"-}+ "visibility": "public",+ "updated_at": "2026-09-28T18:40:35.747Z",+ "description": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}