main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mb85rs128bpnf-g-jnere1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mb85rs128bpnf-g-jnere1: viewers · Ray
mb85rs128bpnf-g-jnere1-etched.fit.json mb85rs128bpnf-g-jnere1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mb85rs128bpnf-g-jnere1-etched.glb mb85rs128bpnf-g-jnere1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mb85rs128bpnf-g-jnere1-etched.step mb85rs128bpnf-g-jnere1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mb85rs128bpnf-g-jnere1.glb Publish 0.1.0 · Ray
mb85rs128bpnf-g-jnere1.kicad_mod Publish 0.1.0 · Ray
mb85rs128bpnf-g-jnere1.kicad_sym Publish 0.1.0 · Ray
mb85rs128bpnf-g-jnere1.lbr Publish 0.1.0 · Ray
mb85rs128bpnf-g-jnere1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json mb85rs128bpnf-g-jnere1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mb85rs128bpnf-g-jnere1: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MB85RS128BPNF-G-JNERE1

FUJITSU · FRAM · SOP-8

MB85RS128BPNF-G-JNERE1 from FUJITSU, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select (active low). Device is selected/active when CS='L', deselected (standby) and SO is High-Z when CS='H'. Must be 'L' before inputting an op-code.
2 SO output Serial Data Output. Outputs FRAM memory cell array and status register data synchronously to the falling edge of SCK. High-Z during standby.
3 WP input Write Protect (active low). Controls writing to the status register in conjunction with the WPEN bit; see WRITING PROTECT section.
4 GND power_in Ground reference (0 V).
5 SI input Serial Data Input. Op-code, address, and write data are input on SI, loaded synchronously to the rising edge of SCK.
6 SCK input Serial Clock input for serial data I/O. SI is latched on the rising edge, SO is driven on the falling edge. Supports SPI mode 0 (CPOL=0, CPHA=0) and mode 3 (CPOL=1, CPHA=1). Up to 33 MHz (25 MHz for READ).
7 HOLD input Hold (active low). When HOLD='L', serial I/O is suspended without deselecting the device: SO becomes High-Z and SCK/SI are ignored. CS must remain 'L' during hold.
8 VDD power_in Supply voltage input, 2.7 V to 3.6 V. Operating current ~6 mA typ @ 33 MHz; standby ~9 uA typ.

Key specifications

Parameter Value
Manufacturer FUJITSU
Package SOP-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MB85RS128BPNF-G-JNERE1

CAD (KiCad official)

  • Symbol: MB85RS128BPNF-G-JNERE1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mb85rs128bpnf-g-jnere1-etched.step / mb85rs128bpnf-g-jnere1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mb85rs128bpnf-g-jnere1.step / mb85rs128bpnf-g-jnere1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FUJITSU datasheet (36 pp, sha256 7424f5d4f31e96a6, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF