main
History Download
Ray Publish 0.1.0 953dcf5

MAX9939AUB+T

Maxim Integrated · Differential OpAmps · MSOP-10

MAX9939AUB+T from Maxim Integrated, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Serial-Clock Input for the SPI interface; data is clocked into the serial interface on the rising edge of SCLK, with fSCLK up to 5MHz.
2 DIN input Serial-Data Input; data is clocked into the serial interface on the rising edge of SCLK, with DIN setup to SCLK of 55ns minimum.
3 GND power_in Ground reference for the device, with VCC supplied from 2.9V to 5.5V relative to GND.
4 INA- input PGA Inverting Input, which accepts signals up to ±16V relative to GND without damage per the absolute maximum ratings.
5 INA+ input PGA Noninverting Input, which accepts signals up to ±16V relative to GND without damage per the absolute maximum ratings.
6 OUTB output Buffer (amplifier B) Output, which is high impedance in shutdown mode and must be kept within VCC + 0.3V absolute maximum.
7 INB input Buffer Input for the uncommitted output op amp (amplifier B), whose noninverting input is referenced to VCC/2.
8 OUTA output PGA Output, which is referenced to VCC/2 and must be kept within -0.3V to VCC + 0.3V absolute maximum.
9 VCC power_in Power Supply, which operates from 2.9V to 5.5V and should be bypassed to GND with 0.1µF and 1µF capacitors.
10 CS input Active-Low Chip-Select Input; drive CS low to enable the serial interface and high to disable it.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package MSOP-10
Category Operational Amplifier/Comparator
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC to GND -0.3 6 V 2
INB, OUTA, OUTB, SCLK, DIN, CS voltage -0.3 V max printed as VCC + 0.3V 2
INA+, INA- to GND -16 16 V 2
Continuous input current into any terminal -20 20 mA 2
Operating temperature range TA -40 125 °C 2
Junction temperature TJ 150 °C 2
Storage temperature range TSTORE -65 150 °C 2
Lead temperature (soldering) 300 °C soldering, 10s 2
Soldering temperature (reflow) 260 °C reflow 2
Gain error GE 0.05 0.38 % TA = +25°C, 0.2V ≤ VOUTA ≤ VCC - 0.2V 2
Gain temperature coefficient Tc-GE 2.2 17 ppm/°C 2
Input offset voltage (no VOS trim) VOS-A 1.5 9 mV With no VOS trim, TA = +25°C 2
Input offset voltage (no VOS trim, full temperature) VOS-A 15 mV With no VOS trim, TA = TMIN to TMAX 2
Input offset-voltage trim range -17 17 mV 2
Common-mode rejection ratio CMRR 50 60 dB -1V ≤ VCM ≤ VCC - 2.2V 2
Common-mode rejection ratio CMRR 39 dB -VCC/2 ≤ VCM ≤ VCC - 2.2V 2
Max capacitive load CL(MAX) 1 nF 2
Output swing VOH, VOL 25 60 mV Voltage output high = VCC - VOUTA; voltage output low = VOUTA - VGND 2
Input offset voltage (output amplifier B) VOS-B 1.5 9 mV TA = +25°C 2
Input offset voltage (output amplifier B, full temperature) VOS-B 15 mV TA = TMIN to TMAX 2
Output swing (amplifier B) VOH, VOL 25 60 mV Voltage output high = VCC - VOUTB; voltage output low = VOUTB - VGND 3
Power-supply rejection ratio PSRR 60 80 dB 1kΩ between OUTA and INB, 1kΩ between OUTB and INB, measured differentially between OUTA and OUTB 3
Supply voltage range VCC 2.9 5.5 V Guaranteed by PSRR 3
Supply current ICC 3.4 6.7 mA OUTA and OUTB unloaded 3
Shutdown supply current ISHDN 13 24 µA Soft shutdown through SPI 3
Input-voltage low VIL 0.8 V 3
Input-voltage high VIH 2 V VCC = 5V 3
Input-voltage high VIH 1.65 V VCC = 3.3V 3
Input leakage current IIN -1 1 µA 3

CAD (KiCad official)

  • Symbol: MAX9939AUB+T
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: max9939aub-t-etched.step / max9939aub-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max9939aub-t.step / max9939aub-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (15 pp, sha256 c993934c250fed74, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF