MAX96714GTJ

{
  "slug": "max96714gtj",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Inc./Maxim Integrated Serializers, Deserializers, TQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "max96714gtj",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max96714gtj.kicad_sym",
    "max96714gtj.kicad_mod",
    "max96714gtj.glb",
    "max96714gtj.step",
    "max96714gtj.lbr",
    "docs/hero.png",
    "docs/max96714gtj-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max96714gtj-hero.glb",
    "max96714gtj-hero.overlay.json",
    "max96714gtj-etched.glb"
  ],
  "component": {
    "mpn": "MAX96714GTJ",
    "manufacturer": "Analog Devices Inc./Maxim Integrated",
    "package": "TQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Interface",
    "subcategory": "Serializers, Deserializers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560193495723515904",
    "parts": {
      "symbol": "max96714gtj.kicad_sym",
      "footprint": "max96714gtj.kicad_mod",
      "model_3d": "max96714gtj-hero.glb",
      "model_3d_plain": "max96714gtj-etched.glb",
      "model_3d_step": "max96714gtj-etched.step",
      "model_3d_step_plain": "max96714gtj.step",
      "lbr": "max96714gtj.lbr"
    },
    "distributor_links": {
      "lcsc": "C22662002"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T06:23:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MFP0",
        "type": "bidirectional",
        "description": "Multifunction pin (VS, DE/DV, MS, FSYNC_OUT, or GPIO0) whose power-up default is GPI0 with a 1MΩ pulldown to ground."
      },
      {
        "number": "2",
        "name": "MFP1",
        "type": "bidirectional",
        "description": "Multifunction pin carrying pass-through I2C SDA1 or UART RX1 (open-drain with 40kΩ pullup to VDDIO, 1Mbps default UART rate), or GPIO1."
      },
      {
        "number": "3",
        "name": "MFP2",
        "type": "bidirectional",
        "description": "Multifunction pin carrying pass-through I2C SCL1 or UART TX1 (open-drain with 40kΩ pullup to VDDIO), or MS, FSYNC_OUT, or GPIO2."
      },
      {
        "number": "4",
        "name": "MFP3",
        "type": "bidirectional",
        "description": "Primary I2C SDA (open-drain output with 40kΩ pullup to VDDIO) or UART RX, selected by the CFG0 state at power-up."
      },
      {
        "number": "5",
        "name": "CFG0",
        "type": "input",
        "description": "Configuration input whose voltage is latched at power-up through an external resistor divider to set the device address and I2C/UART select per Table 8."
      },
      {
        "number": "6",
        "name": "MFP4",
        "type": "bidirectional",
        "description": "Primary I2C SCL (open-drain output with 40kΩ pullup to VDDIO) or UART TX, selected by the CFG0 state at power-up."
      },
      {
        "number": "7",
        "name": "MFP5",
        "type": "bidirectional",
        "description": "Open-drain LOCK output with 40kΩ pullup to VDDIO, alternately programmable as VS, DE/DV push-pull monitor output, or GPIO5."
      },
      {
        "number": "8",
        "name": "X1/OSC",
        "type": "input",
        "description": "Crystal or oscillator input for a 25MHz crystal (±200ppm per Table 2); if an oscillator is used, connect it to this pin."
      },
      {
        "number": "9",
        "name": "X2",
        "type": "passive",
        "description": "Second crystal terminal for the 25MHz crystal; leave floating if an oscillator drives X1."
      },
      {
        "number": "10",
        "name": "XRES",
        "type": "passive",
        "description": "Connect a 402Ω ±1% resistor between XRES and ground."
      },
      {
        "number": "11",
        "name": "VDD18",
        "type": "power_in",
        "description": "1.8V analog supply (Table 1 range 1.7V to 1.9V)."
      },
      {
        "number": "12",
        "name": "SION/SIO",
        "type": "bidirectional",
        "description": "Inverted GMSL serial-data input/output (SION for twisted pair, SIO for coax), with the mode set by the CFG1 state at power-up."
      },
      {
        "number": "13",
        "name": "SIOP",
        "type": "bidirectional",
        "description": "Noninverted GMSL serial-data input/output for twisted pair; in coax mode this unused input is terminated with RTERM (49.9Ω) next to its link isolation capacitor."
      },
      {
        "number": "14",
        "name": "CAP_VDD",
        "type": "passive",
        "description": "Decoupling capacitor connection for the 1.0V core supply; place a 10nF capacitor as close as possible to the pin with at least 10µF bulk nearby."
      },
      {
        "number": "15",
        "name": "VDD",
        "type": "power_in",
        "description": "1.0V core supply: connect 0.95V to 1.05V to bypass the internal LDO, or 1.14V to 1.26V to use the internal 1.0V regulator (after writing REG_ENABLE=1 and LDO_TEST=1)."
      },
      {
        "number": "16",
        "name": "CFG1",
        "type": "input",
        "description": "Configuration input whose voltage is latched at power-up through an external resistor divider to set the link and mode options per Table 9."
      },
      {
        "number": "17",
        "name": "VDDIO",
        "type": "power_in",
        "description": "1.8V to 3.3V I/O supply (Table 1 gives 1.7V to 3.6V)."
      },
      {
        "number": "18",
        "name": "MFP6",
        "type": "bidirectional",
        "description": "Line-fault monitor input LMN0, or GPIO6 (power-up default GPI6 with 1MΩ pulldown to ground), or CNTL2 push-pull output in GMSL1 mode."
      },
      {
        "number": "19",
        "name": "MFP7",
        "type": "bidirectional",
        "description": "Line-fault monitor input LMN1, or GPIO7 (power-up default GPI7 with 1MΩ pulldown to ground), or CNTL0 push-pull output in GMSL1 mode."
      },
      {
        "number": "20",
        "name": "VTERM",
        "type": "power_in",
        "description": "1.2V D-PHY supply (Table 1 range 1.14V to 1.26V)."
      },
      {
        "number": "21",
        "name": "D0P",
        "type": "output",
        "description": "MIPI D-PHY data lane 0 noninverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "22",
        "name": "D0N",
        "type": "output",
        "description": "MIPI D-PHY data lane 0 inverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "23",
        "name": "D1P",
        "type": "output",
        "description": "MIPI D-PHY data lane 1 noninverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "24",
        "name": "D1N",
        "type": "output",
        "description": "MIPI D-PHY data lane 1 inverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "25",
        "name": "D2P",
        "type": "output",
        "description": "MIPI D-PHY data lane 2 noninverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "26",
        "name": "D2N",
        "type": "output",
        "description": "MIPI D-PHY data lane 2 inverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "27",
        "name": "CKP",
        "type": "output",
        "description": "MIPI D-PHY clock lane noninverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "28",
        "name": "CKN",
        "type": "output",
        "description": "MIPI D-PHY clock lane inverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "29",
        "name": "D3P",
        "type": "output",
        "description": "MIPI D-PHY data lane 3 noninverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "30",
        "name": "D3N",
        "type": "output",
        "description": "MIPI D-PHY data lane 3 inverted output, supporting up to 2.5Gbps per lane."
      },
      {
        "number": "31",
        "name": "PWDNB",
        "type": "input",
        "description": "Active-low power-down input with a 1MΩ pulldown to ground; driving it low places the device in power-down mode."
      },
      {
        "number": "32",
        "name": "MFP8",
        "type": "bidirectional",
        "description": "Open-drain ERRB error output with 40kΩ pullup to VDDIO that goes low when an error is detected, or GPIO8."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package mismatch: the MPN MAX96714GTJ is ordered as 32-Pin TQFN-SW-EP (ordering code /VY, wettable f; Pin numbers and names come from the Pin Descriptions table on pages 17 to 20. The Pin Configuration ; Multifunction pins (1-4, 6-7, 18-19, 32) have several alternate functions that depend on register co",
          "exposed pad 33 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 42,
        "cost_usd": 0.2637,
        "at": "2026-10-19T06:23:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560193495723515904",
        "pages": 210,
        "sha256": "f57e4f6aee81b7ee",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max96714gtj.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max96714gtj-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ee5aa2468aae9070aacd9cdc566dcef515759f2dee240a73f204d90b34cccf2e",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}