main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max96714fgtj: viewers · Ray
max96714fgtj-etched.glb Publish 0.1.0 · Ray
max96714fgtj-etched.step max96714fgtj: factory component page (tier=mfr) · Ray
max96714fgtj-hero.glb max96714fgtj: hero GLB from the etched model (keeps the MPN mark) · Ray
max96714fgtj-hero.overlay.json Publish 0.1.0 · Ray
max96714fgtj.glb Publish 0.1.0 · Ray
max96714fgtj.kicad_mod Publish 0.1.0 · Ray
max96714fgtj.kicad_sym Publish 0.1.0 · Ray
max96714fgtj.lbr Publish 0.1.0 · Ray
max96714fgtj.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

MAX96714FGTJ

Analog Devices Inc./Maxim Integrated · Serializers, Deserializers · TQFN-32(5x5)

MAX96714FGTJ from Analog Devices Inc./Maxim Integrated, in a TQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MFP0 bidirectional Multifunction pin: MS UART mode select (1MΩ pull-down, low=Base, high=Bypass), VS, FSYNC_OUT, DE/DV or GPIO0 (power-up default GPI with 1MΩ pull-down).
2 MFP1 bidirectional Multifunction pin: pass-through SDA1/RX1 or SDA2/RX2 (40kΩ pull-up to VDDIO) or GPIO1.
3 MFP2 bidirectional Multifunction pin: pass-through SCL1/TX1 or SCL2/TX2 (40kΩ pull-up to VDDIO), MS, FSYNC_OUT or GPIO2.
4 MFP3 bidirectional Primary I2C data input/open-drain output (SDA) or UART RX, with 40kΩ pull-up to VDDIO.
5 CFG0 input Configuration pin whose voltage is latched at power-up to select I2C/UART and device address (see Table 8); set by resistor divider from VDDIO.
6 MFP4 bidirectional Primary I2C clock input/open-drain output (SCL) or UART TX, with 40kΩ pull-up to VDDIO.
7 MFP5 bidirectional Multifunction pin: LOCK open-drain indication output (40kΩ pull-up to VDDIO), VS, DE/DV or GPIO5.
8 X1/OSC input Crystal/oscillator input; connect a 25MHz crystal, or the oscillator output if an oscillator is used.
9 X2 passive Connect the other terminal of the 25MHz crystal; leave floating if an oscillator is used.
10 XRES passive Connect a 402Ω ±1% resistor between XRES and ground.
11 VDD18 power_in 1.8V analog supply (1.7V to 1.9V).
12 SION/SIO bidirectional Inverted twisted-pair serial-data I/O (SION) or coax serial-data I/O (SIO), selected by CFG1 state at power-up.
13 SIOP bidirectional Noninverted twisted-pair serial-data input/output, configuration determined by CFG1 state at power-up.
14 CAP_VDD passive Decoupling capacitor pin for the 1.0V core supply.
15 VDD power_in 1.0V core supply with optional on-chip LDO: connect 0.95V to 1.05V to bypass the LDO, or 1.14V to 1.26V to use the internal 1.0V regulator.
16 CFG1 input Configuration pin whose voltage is latched at power-up to select coax/twisted pair, GMSL mode and tunnel/pixel mode (see Table 9).
17 VDDIO power_in 1.8V to 3.3V I/O supply.
18 MFP6 bidirectional Multifunction pin: LMN0 line-fault monitor input or GPIO6 (power-up default GPI6 with 1MΩ pull-down).
19 MFP7 bidirectional Multifunction pin: LMN1 line-fault monitor input or GPIO7 (power-up default GPI7 with 1MΩ pull-down).
20 VTERM power_in 1.2V D-PHY supply (1.14V to 1.26V).
21 D0P output CSI-2 data lane 0 noninverted output.
22 D0N output CSI-2 data lane 0 inverted output.
23 D1P output CSI-2 data lane 1 noninverted output.
24 D1N output CSI-2 data lane 1 inverted output.
25 D2P output CSI-2 data lane 2 noninverted output.
26 D2N output CSI-2 data lane 2 inverted output.
27 CKP output CSI-2 clock lane noninverted output.
28 CKN output CSI-2 clock lane inverted output.
29 D3P output CSI-2 data lane 3 noninverted output.
30 D3N output CSI-2 data lane 3 inverted output.
31 PWDNB input Active-low power-down input with 1MΩ pull-down to ground; set low to enter power-down mode.
32 MFP8 bidirectional Multifunction pin: ERRB open-drain error output (40kΩ pull-up to VDDIO, low indicates error) or GPIO8.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package TQFN-32(5x5)
Category Interface
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage swing (single-ended) GMSL2 VO 190 250 310 mV RL = 100Ω ±1% 7
Output voltage swing (differential) GMSL2 VODT 380 500 620 mV RL = 100Ω ±1%, peak-to-peak differential voltage 7
Change in VOD between complementary output states ΔVOD 25 mV RL = 100Ω ±1%, /VOD(H) − VOD(L)/ 7
Termination resistance (internal) GMSL2 RT 50 55 60 Ω Any Pin to VDD18 7
D-PHY LP high-level output voltage VOH 0.95 1.2 1.3 V 7
D-PHY LP low-level output voltage VOL -50 50 mV 7
HS transmit static common mode voltage VCMTX 150 200 250 mV See Figure 3 7
HS transmit differential voltage /VOD/ 140 200 270 mV See Figure 3 8
Single-ended output impedance ZOS 40 50 62.5 Ω 8
I/O pin input current IIN 1 μA All pull-up/pull-down devices disabled. VIN = 0V to VDDIO 8
I/O output high voltage drop VOH 0.4 V IOH = -4mA; min is VDDIO - 0.4V (printed relative to VDDIO); max inferred 8
I/O low-level output voltage VOL 0.4 V IOL = 4mA 8
Supply current VDD (3Gbps, 1.0V) IDD 78 220 mA 3Gbps link, 2.4Gbps video payload, PRBS24, four data lanes, 600Mbps per lane (MAX96714F/R), VDD = 1.0V 9
Supply current VDD (3Gbps, 1.2V) IDD 80 210 mA 3Gbps link, 2.4Gbps video payload, PRBS24, four data lanes, 600Mbps per lane (MAX96714F/R), VDD = 1.2V 9
Supply current VDD18 (3Gbps) IDD 114 155 mA 3Gbps link, 2.4Gbps video payload, PRBS24, four data lanes, 600Mbps per lane (MAX96714F/R), VDD18 = 1.8V 9
Supply current VTERM (3Gbps) IDD 14 22 mA 3Gbps link, 2.4Gbps video payload, PRBS24, four data lanes, 600Mbps per lane (MAX96714F/R), VTERM = 1.2V 9
Maximum power-down current VDDIO IDD 6 μA VDDIO at 3.6V, TA = 25°C and 105°C 10
Maximum power-down current VDD18 IDD 10 μA VDD18 at 1.9V, TA = 105°C (1 μA at 25°C) 10
GMSL2 lock time tLOCK2 31 ms From power-up, one-shot reset, or rising edge of PWDNB to rising edge of LOCK 10
I2C/UART output fall time tF 150 ns 70% to 30%, CL = 20pF to 100pF, 1kΩ pull-up to VDDIO 13
I2C/UART wake time tWAKEUP 12.25 ms From power-up, or rising edge of PWDNB to local register access 13
Crystal frequency stability + tolerance fTN -200 200 ppm Crystal reference clock 15
Crystal frequency fXTAL 25 MHz 14
Supply VTERM VTERM 1.14 1.2 1.26 V 22
Supply VDD18 VDD18 1.7 1.8 1.9 V 22
Supply VDD (1.0V nominal) VDD 0.95 1 1.05 V Nominal 1.0V 22
Supply VDD (1.2V nominal) VDD 1.14 1.2 1.26 V Nominal 1.2V 22
Supply VDDIO VDDIO 1.7 3.6 V 22
Operating junction temperature TJ -40 125 ºC 22
Operating ambient temperature TA -40 105 °C 53
VDDIO absolute maximum VDDIO -0.3 3.9 V With respect to ground 6
VDD18 absolute maximum VDD18 -0.3 2 V With respect to ground 6
VDD absolute maximum VDD -0.3 2 V With respect to ground 6
VTERM absolute maximum VTERM -0.3 1.32 V With respect to ground 6
CAP_VDD absolute maximum CAP_VDD -0.3 1.2 V With respect to ground 6
SIO_ inactive state voltage SIO_ -0.3 1.1 V Inactive state 6
Storage temperature range -40 150 °C 6
Soldering temperature (reflow) 260 °C 6
Junction to ambient thermal resistance θJA 29 °C/W 32-Pin TQFN, four-layer board 6
Junction to case thermal resistance θJC 1.7 °C/W 32-Pin TQFN, four-layer board 6

CAD (KiCad official)

  • Symbol: MAX96714FGTJ
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: TQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: max96714fgtj-etched.step / max96714fgtj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max96714fgtj.step / max96714fgtj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (165 pp, sha256 51fc4d62cdc4e20f, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF