main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max961esa-t: .lbr and symbol viewer from adom-lbr 2.47.10 (primes, overbars) · Ray
max961esa-t-etched.glb Publish 0.1.0 · Ray
max961esa-t-etched.step max961esa-t: factory component page (tier=mfr) · Ray
max961esa-t-hero.glb max961esa-t: hero GLB from the etched model (keeps the MPN mark) · Ray
max961esa-t-hero.overlay.json Publish 0.1.0 · Ray
max961esa-t.glb Publish 0.1.0 · Ray
max961esa-t.kicad_mod Publish 0.1.0 · Ray
max961esa-t.kicad_sym Publish 0.1.0 · Ray
max961esa-t.lbr max961esa-t: .lbr and symbol viewer from adom-lbr 2.47.10 (primes, overbars) · Ray
max961esa-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MAX961ESA+T

Analog Devices Inc./Maxim Integrated · Comparators · SOIC-8

MAX961ESA+T from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Comparator A noninverting input with input common-mode range extending 100mV beyond both supply rails.
2 IN- input Comparator A inverting input with input common-mode range extending 100mV beyond both supply rails.
3 SHDN input Shutdown input; the device shuts down when SHDN is high (outputs go high impedance), connect to GND for normal operation.
4 LE input Latch-enable input; the output latches when LE is high and the latch is transparent when LE is low.
5 GND power_in Ground.
6 Q output Comparator A TTL/CMOS-compatible output that sources or sinks 4mA to within 0.52V of the rails.
7 ~{Q} output Comparator A complementary output.
8 VCC power_in Positive supply input; VCC to GND must be ≤5.5V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 2.7 5.5 V Inferred by PSRR 2
Input Common-Mode Voltage Range (min) VCMR -0.1 V Note 2; max is VCC + 0.1 2
Input-Referred Trip Points VTRIP -3.5 2 3.5 mV VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TA = +25°C 2
Input-Referred Trip Points over temperature VTRIP -4 4 mV VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TMIN to TMAX 2
Input Offset Voltage VOS -1.5 0.5 1.5 mV VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TA = +25°C 2
Input Offset Voltage over temperature VOS -2 2 mV VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TMIN to TMAX 2
Input Bias Current IB -15 15 µA VIN+ = VIN- = 0V or VCC, VCC = 5V, all other E packages, TMIN to TMAX 2
Common-Mode Rejection Ratio CMRR 0.1 0.3 mV/V VCC = 5V, VCM = -0.1V to 5.1V, all other E packages, TA = +25°C 3
Common-Mode Rejection Ratio over temperature CMRR 0.5 mV/V VCC = 5V, VCM = -0.1V to 5.1V, all other E packages, TMIN to TMAX 3
Power-Supply Rejection Ratio PSRR 0.05 0.3 mV/V VCM = 0V, TA = +25°C 3
Power-Supply Rejection Ratio over temperature PSRR 0.3 mV/V VCM = 0V, TMIN to TMAX 3
Output Low Voltage VOL 0.52 V ISINK = 4mA, E grade 3
Supply Current per Comparator ICC 7.2 11 mA MAX961/MAX963, VCC = 5V, TA = +25°C 3
Supply Current per Comparator over temperature ICC 11 mA MAX961/MAX963, VCC = 5V, TMIN to TMAX 3
Shutdown Supply Current per Comparator ISHDN 0.27 0.5 mA MAX961/MAX963/MAX964/MAX997, VCC = 5V 3
Shutdown Output Leakage Current 1 20 µA MAX961/MAX963/MAX964/MAX997, VOUT = 5V and VCC - 5V 3
Logic-Input Current IIL, IIH -30 15 30 µA VLOGIC = 0V or VCC 3
Propagation Delay tPD 4.5 7 ns 5mV overdrive (Note 7), E grade, TA = +25°C 3
Propagation Delay over temperature tPD 8.5 ns 5mV overdrive (Note 7), E grade, TMIN to TMAX 3
Data-to-Latch Setup Time tSU 5 ns MAX961/MAX963 (Note 8) 4
Latch-to-Data Hold Time tH 5 ns MAX961/MAX963 (Note 8) 4
Latch Pulse Width tLPW 5 ns MAX961/MAX963 (Note 8) 4
Latch Propagation Delay tLPD 10 ns MAX961/MAX963 (Note 8) 4
Input-Referred Hysteresis VHYST 3.5 mV 2
Differential Input Clamp Voltage 2.1 V VCC = 5.5V, VIN- = 0V, IIN+ = 100µA 2
Input Capacitance 3 pF 2
Differential Input Impedance RIND 8 kΩ VCC = 5V 2
Common-Mode Input Impedance RINCM 130 kΩ VCC = 5V 2
Output Capacitance 4 pF 3
Rise/Fall Time tR, tF 2.3 ns VCC = 5V 3
Differential Propagation Delay tPD 0.3 ns Between any two channels or outputs (Q/Q) 3
Propagation-Delay Skew tSKEW 0.3 ns Between tPD- and tPD+ 3
Shutdown Time tOFF 150 ns Delay until output is high-Z (> 10kΩ) 4
Shutdown Disable Time tON 250 ns Delay until output is valid 4
Supply Voltage, VCC to GND VCC -0.3 6 V 2
Current into Input Pins -20 20 mA 2
Operating Temperature Range -40 85 °C MAX96_E 2
Storage Temperature Range -65 160 °C 2
Lead Temperature 300 °C soldering, 10s 2

CAD (KiCad official)

  • Symbol: MAX961ESA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max961esa-t-etched.step / max961esa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max961esa-t.step / max961esa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (13 pp, sha256 37eccab3ec7c9c5b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF