3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX961ESA+T
Analog Devices Inc./Maxim Integrated · Comparators · SOIC-8
MAX961ESA+T from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Comparator A noninverting input with input common-mode range extending 100mV beyond both supply rails. |
| 2 | IN- | input | Comparator A inverting input with input common-mode range extending 100mV beyond both supply rails. |
| 3 | SHDN | input | Shutdown input; the device shuts down when SHDN is high (outputs go high impedance), connect to GND for normal operation. |
| 4 | LE | input | Latch-enable input; the output latches when LE is high and the latch is transparent when LE is low. |
| 5 | GND | power_in | Ground. |
| 6 | Q | output | Comparator A TTL/CMOS-compatible output that sources or sinks 4mA to within 0.52V of the rails. |
| 7 | ~{Q} | output | Comparator A complementary output. |
| 8 | VCC | power_in | Positive supply input; VCC to GND must be ≤5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | 5.5 | V | Inferred by PSRR | 2 | |
| Input Common-Mode Voltage Range (min) | VCMR | -0.1 | V | Note 2; max is VCC + 0.1 | 2 | ||
| Input-Referred Trip Points | VTRIP | -3.5 | 2 | 3.5 | mV | VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TA = +25°C | 2 |
| Input-Referred Trip Points over temperature | VTRIP | -4 | 4 | mV | VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TMIN to TMAX | 2 | |
| Input Offset Voltage | VOS | -1.5 | 0.5 | 1.5 | mV | VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TA = +25°C | 2 |
| Input Offset Voltage over temperature | VOS | -2 | 2 | mV | VCM = -0.1V or 5.1V, VCC = 5V, all other E packages, TMIN to TMAX | 2 | |
| Input Bias Current | IB | -15 | 15 | µA | VIN+ = VIN- = 0V or VCC, VCC = 5V, all other E packages, TMIN to TMAX | 2 | |
| Common-Mode Rejection Ratio | CMRR | 0.1 | 0.3 | mV/V | VCC = 5V, VCM = -0.1V to 5.1V, all other E packages, TA = +25°C | 3 | |
| Common-Mode Rejection Ratio over temperature | CMRR | 0.5 | mV/V | VCC = 5V, VCM = -0.1V to 5.1V, all other E packages, TMIN to TMAX | 3 | ||
| Power-Supply Rejection Ratio | PSRR | 0.05 | 0.3 | mV/V | VCM = 0V, TA = +25°C | 3 | |
| Power-Supply Rejection Ratio over temperature | PSRR | 0.3 | mV/V | VCM = 0V, TMIN to TMAX | 3 | ||
| Output Low Voltage | VOL | 0.52 | V | ISINK = 4mA, E grade | 3 | ||
| Supply Current per Comparator | ICC | 7.2 | 11 | mA | MAX961/MAX963, VCC = 5V, TA = +25°C | 3 | |
| Supply Current per Comparator over temperature | ICC | 11 | mA | MAX961/MAX963, VCC = 5V, TMIN to TMAX | 3 | ||
| Shutdown Supply Current per Comparator | ISHDN | 0.27 | 0.5 | mA | MAX961/MAX963/MAX964/MAX997, VCC = 5V | 3 | |
| Shutdown Output Leakage Current | 1 | 20 | µA | MAX961/MAX963/MAX964/MAX997, VOUT = 5V and VCC - 5V | 3 | ||
| Logic-Input Current | IIL, IIH | -30 | 15 | 30 | µA | VLOGIC = 0V or VCC | 3 |
| Propagation Delay | tPD | 4.5 | 7 | ns | 5mV overdrive (Note 7), E grade, TA = +25°C | 3 | |
| Propagation Delay over temperature | tPD | 8.5 | ns | 5mV overdrive (Note 7), E grade, TMIN to TMAX | 3 | ||
| Data-to-Latch Setup Time | tSU | 5 | ns | MAX961/MAX963 (Note 8) | 4 | ||
| Latch-to-Data Hold Time | tH | 5 | ns | MAX961/MAX963 (Note 8) | 4 | ||
| Latch Pulse Width | tLPW | 5 | ns | MAX961/MAX963 (Note 8) | 4 | ||
| Latch Propagation Delay | tLPD | 10 | ns | MAX961/MAX963 (Note 8) | 4 | ||
| Input-Referred Hysteresis | VHYST | 3.5 | mV | 2 | |||
| Differential Input Clamp Voltage | 2.1 | V | VCC = 5.5V, VIN- = 0V, IIN+ = 100µA | 2 | |||
| Input Capacitance | 3 | pF | 2 | ||||
| Differential Input Impedance | RIND | 8 | kΩ | VCC = 5V | 2 | ||
| Common-Mode Input Impedance | RINCM | 130 | kΩ | VCC = 5V | 2 | ||
| Output Capacitance | 4 | pF | 3 | ||||
| Rise/Fall Time | tR, tF | 2.3 | ns | VCC = 5V | 3 | ||
| Differential Propagation Delay | tPD | 0.3 | ns | Between any two channels or outputs (Q/Q) | 3 | ||
| Propagation-Delay Skew | tSKEW | 0.3 | ns | Between tPD- and tPD+ | 3 | ||
| Shutdown Time | tOFF | 150 | ns | Delay until output is high-Z (> 10kΩ) | 4 | ||
| Shutdown Disable Time | tON | 250 | ns | Delay until output is valid | 4 | ||
| Supply Voltage, VCC to GND | VCC | -0.3 | 6 | V | 2 | ||
| Current into Input Pins | -20 | 20 | mA | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | MAX96_E | 2 | ||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX961ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max961esa-t-etched.step/max961esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max961esa-t.step/max961esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (13 pp, sha256
37eccab3ec7c9c5b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).