main
Ray
Publish 0.1.0
d7da1b9
MAX942ESA+T
Maxim Integrated · Comparators · SO-8
MAX942ESA+T from Maxim Integrated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Comparator A output; the datasheet states it pulls to within 0.4V of either supply rail without external pullup. |
| 2 | INA- | input | Comparator A inverting input; the input common-mode range extends beyond both supply rails. |
| 3 | INA+ | input | Comparator A noninverting input; the input common-mode range extends beyond both supply rails. |
| 4 | GND | power_in | Ground reference for the device supply. |
| 5 | INB+ | input | Comparator B noninverting input; the input common-mode range extends beyond both supply rails. |
| 6 | INB- | input | Comparator B inverting input; the input common-mode range extends beyond both supply rails. |
| 7 | OUTB | output | Comparator B output; the datasheet states it pulls to within 0.4V of either supply rail without external pullup. |
| 8 | V+ | power_in | Positive supply; V+ to GND must be ≤ 6.5V and the operating supply range is 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input-referred trip points TA = +25°C | VTRIP | 1 | 3 | mV | VCM = 0V or VCM = V+ (Note 2), TA = +25°C | 2 | |
| Input-referred trip points TA = TMIN to TMAX | VTRIP | 4 | mV | VCM = 0V or VCM = V+ (Note 2), TA = TMIN to TMAX | 2 | ||
| Input offset voltage TA = +25°C | VOS | 1 | 2 | mV | VCM = 0V or VCM = V+ (Note 3), TA = +25°C | 2 | |
| Input offset voltage TA = TMIN to TMAX | VOS | 3 | mV | VCM = 0V or VCM = V+ (Note 3), TA = TMIN to TMAX | 2 | ||
| Common-mode rejection ratio | CMRR | 80 | 300 | μV/V | (Note 5) | 2 | |
| Power-supply rejection ratio | PSRR | 80 | 300 | μV/V | 2.7V ≤ V+ ≤ 5.5V, VCM = 0V | 2 | |
| Output low voltage ISINK = 400μA | VOL | 0.2 | 0.4 | V | ISINK = 400μA | 2 | |
| Output low voltage ISINK = 4mA | VOL | 0.3 | 0.4 | V | ISINK = 4mA | 2 | |
| Input bias current | IB | 150 | 400 | nA | VIN = VOS, VCM = 0V or VCM = V+ (Note 4), MAX94_E/A | 2 | |
| Input offset current | IOS | 10 | 150 | nA | VIN = VOS, VCM = 0V or V+ | 2 | |
| Input differential clamp voltage | VCLAMP | 2.2 | V | Force 100μA into IN+, IN- = GND, measure VIN+ - VIN-, Figure 3 | 2 | ||
| Output leakage current | ILEAK | 1 | µA | (Note 6) | 2 | ||
| Supply current per comparator V+ = 3V (MAX942) | ICC | 350 | 500 | μA | V+ = 3V, MAX942/MAX944 | 3 | |
| Supply current per comparator V+ = 5V (MAX942) | ICC | 400 | 600 | μA | V+ = 5V, MAX942/MAX944 | 3 | |
| Power dissipation per comparator | PD | 1 | 3.6 | mW | MAX942/MAX944 (Note 7) | 3 | |
| Propagation delay tPD+, tPD- | tPD+, tPD- | 80 | 200 | ns | (Note 8), MAX94_E/A | 3 | |
| Positive supply voltage | V+ | 2.7 | 5.5 | V | 2 | ||
| Input voltage range | VCMR | -0.2 | V | (Note 1) | 2 | ||
| Operating temperature range MAX94_E | TA | -40 | 85 | °C | MAX94_E_ _ (MAX942ESA) | 2 | |
| Positive supply voltage V+ to GND | V+ | 6.5 | V | V+ to GND | 2 | ||
| Differential input voltage | -0.3 | V | Upper limit printed as V+ + 0.3V | 2 | |||
| Common-mode input voltage | -0.3 | V | Upper limit printed as V+ + 0.3V | 2 | |||
| Current into input pins | -20 | 20 | mA | Printed as ±20mA | 2 | ||
| Storage temperature range | TSTORE | -65 | 150 | °C | 2 | ||
| Lead temperature | 300 | °C | Soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX942ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
max942esa-t-etched.step/max942esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max942esa-t.step/max942esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (12 pp, sha256
7140ebd71e6b28dc, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX942ESA+T
**Maxim Integrated** · Comparators · SO-8
MAX942ESA+T from Maxim Integrated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Comparator A output; the datasheet states it pulls to within 0.4V of either supply rail without external pullup. |
| 2 | INA- | input | Comparator A inverting input; the input common-mode range extends beyond both supply rails. |
| 3 | INA+ | input | Comparator A noninverting input; the input common-mode range extends beyond both supply rails. |
| 4 | GND | power_in | Ground reference for the device supply. |
| 5 | INB+ | input | Comparator B noninverting input; the input common-mode range extends beyond both supply rails. |
| 6 | INB- | input | Comparator B inverting input; the input common-mode range extends beyond both supply rails. |
| 7 | OUTB | output | Comparator B output; the datasheet states it pulls to within 0.4V of either supply rail without external pullup. |
| 8 | V+ | power_in | Positive supply; V+ to GND must be ≤ 6.5V and the operating supply range is 2.7V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input-referred trip points TA = +25°C | VTRIP | 1 | | 3 | mV | VCM = 0V or VCM = V+ (Note 2), TA = +25°C | 2 |
| Input-referred trip points TA = TMIN to TMAX | VTRIP | | | 4 | mV | VCM = 0V or VCM = V+ (Note 2), TA = TMIN to TMAX | 2 |
| Input offset voltage TA = +25°C | VOS | 1 | | 2 | mV | VCM = 0V or VCM = V+ (Note 3), TA = +25°C | 2 |
| Input offset voltage TA = TMIN to TMAX | VOS | | | 3 | mV | VCM = 0V or VCM = V+ (Note 3), TA = TMIN to TMAX | 2 |
| Common-mode rejection ratio | CMRR | 80 | | 300 | μV/V | (Note 5) | 2 |
| Power-supply rejection ratio | PSRR | 80 | | 300 | μV/V | 2.7V ≤ V+ ≤ 5.5V, VCM = 0V | 2 |
| Output low voltage ISINK = 400μA | VOL | | 0.2 | 0.4 | V | ISINK = 400μA | 2 |
| Output low voltage ISINK = 4mA | VOL | | 0.3 | 0.4 | V | ISINK = 4mA | 2 |
| Input bias current | IB | | 150 | 400 | nA | VIN = VOS, VCM = 0V or VCM = V+ (Note 4), MAX94_E/A | 2 |
| Input offset current | IOS | | 10 | 150 | nA | VIN = VOS, VCM = 0V or V+ | 2 |
| Input differential clamp voltage | VCLAMP | | 2.2 | | V | Force 100μA into IN+, IN- = GND, measure VIN+ - VIN-, Figure 3 | 2 |
| Output leakage current | ILEAK | | | 1 | µA | (Note 6) | 2 |
| Supply current per comparator V+ = 3V (MAX942) | ICC | | 350 | 500 | μA | V+ = 3V, MAX942/MAX944 | 3 |
| Supply current per comparator V+ = 5V (MAX942) | ICC | | 400 | 600 | μA | V+ = 5V, MAX942/MAX944 | 3 |
| Power dissipation per comparator | PD | | 1 | 3.6 | mW | MAX942/MAX944 (Note 7) | 3 |
| Propagation delay tPD+, tPD- | tPD+, tPD- | | 80 | 200 | ns | (Note 8), MAX94_E/A | 3 |
| Positive supply voltage | V+ | 2.7 | | 5.5 | V | | 2 |
| Input voltage range | VCMR | -0.2 | | | V | (Note 1) | 2 |
| Operating temperature range MAX94_E | TA | -40 | | 85 | °C | MAX94_E_ _ (MAX942ESA) | 2 |
| Positive supply voltage V+ to GND | V+ | | | 6.5 | V | V+ to GND | 2 |
| Differential input voltage | | -0.3 | | | V | Upper limit printed as V+ + 0.3V | 2 |
| Common-mode input voltage | | -0.3 | | | V | Upper limit printed as V+ + 0.3V | 2 |
| Current into input pins | | -20 | | 20 | mA | Printed as ±20mA | 2 |
| Storage temperature range | TSTORE | -65 | | 150 | °C | | 2 |
| Lead temperature | | | | 300 | °C | Soldering, 10s | 2 |
## CAD (KiCad official)
- Symbol: `MAX942ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `max942esa-t-etched.step` / `max942esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max942esa-t.step` / `max942esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max941-max944.pdf) (12 pp, sha256 `7140ebd71e6b28dc`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max942esa-t-datasheet.pdf)