Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX942ESA+T

Maxim Integrated · Comparators · SO-8

MAX942ESA+T from Maxim Integrated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Comparator A output; the datasheet states it pulls to within 0.4V of either supply rail without external pullup.
2 INA- input Comparator A inverting input; the input common-mode range extends beyond both supply rails.
3 INA+ input Comparator A noninverting input; the input common-mode range extends beyond both supply rails.
4 GND power_in Ground reference for the device supply.
5 INB+ input Comparator B noninverting input; the input common-mode range extends beyond both supply rails.
6 INB- input Comparator B inverting input; the input common-mode range extends beyond both supply rails.
7 OUTB output Comparator B output; the datasheet states it pulls to within 0.4V of either supply rail without external pullup.
8 V+ power_in Positive supply; V+ to GND must be ≤ 6.5V and the operating supply range is 2.7V to 5.5V.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SO-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input-referred trip points TA = +25°C VTRIP 1 3 mV VCM = 0V or VCM = V+ (Note 2), TA = +25°C 2
Input-referred trip points TA = TMIN to TMAX VTRIP 4 mV VCM = 0V or VCM = V+ (Note 2), TA = TMIN to TMAX 2
Input offset voltage TA = +25°C VOS 1 2 mV VCM = 0V or VCM = V+ (Note 3), TA = +25°C 2
Input offset voltage TA = TMIN to TMAX VOS 3 mV VCM = 0V or VCM = V+ (Note 3), TA = TMIN to TMAX 2
Common-mode rejection ratio CMRR 80 300 μV/V (Note 5) 2
Power-supply rejection ratio PSRR 80 300 μV/V 2.7V ≤ V+ ≤ 5.5V, VCM = 0V 2
Output low voltage ISINK = 400μA VOL 0.2 0.4 V ISINK = 400μA 2
Output low voltage ISINK = 4mA VOL 0.3 0.4 V ISINK = 4mA 2
Input bias current IB 150 400 nA VIN = VOS, VCM = 0V or VCM = V+ (Note 4), MAX94_E/A 2
Input offset current IOS 10 150 nA VIN = VOS, VCM = 0V or V+ 2
Input differential clamp voltage VCLAMP 2.2 V Force 100μA into IN+, IN- = GND, measure VIN+ - VIN-, Figure 3 2
Output leakage current ILEAK 1 µA (Note 6) 2
Supply current per comparator V+ = 3V (MAX942) ICC 350 500 μA V+ = 3V, MAX942/MAX944 3
Supply current per comparator V+ = 5V (MAX942) ICC 400 600 μA V+ = 5V, MAX942/MAX944 3
Power dissipation per comparator PD 1 3.6 mW MAX942/MAX944 (Note 7) 3
Propagation delay tPD+, tPD- tPD+, tPD- 80 200 ns (Note 8), MAX94_E/A 3
Positive supply voltage V+ 2.7 5.5 V 2
Input voltage range VCMR -0.2 V (Note 1) 2
Operating temperature range MAX94_E TA -40 85 °C MAX94_E_ _ (MAX942ESA) 2
Positive supply voltage V+ to GND V+ 6.5 V V+ to GND 2
Differential input voltage -0.3 V Upper limit printed as V+ + 0.3V 2
Common-mode input voltage -0.3 V Upper limit printed as V+ + 0.3V 2
Current into input pins -20 20 mA Printed as ±20mA 2
Storage temperature range TSTORE -65 150 °C 2
Lead temperature 300 °C Soldering, 10s 2

CAD (KiCad official)

  • Symbol: MAX942ESA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: max942esa-t-etched.step / max942esa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max942esa-t.step / max942esa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (12 pp, sha256 7140ebd71e6b28dc, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF