main
Ray
Publish 0.1.0
09f719f
MAX918EUK+T
Analog Devices Inc./Maxim Integrated · Comparators · SOT-23-5
MAX918EUK+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output; on the MAX918 this is an open-drain output that can be pulled beyond VCC to an absolute maximum of 6V above VEE, with output voltage limited to (VEE - 0.3V) to +6V. |
| 2 | VEE | power_in | Negative supply voltage (ground reference for the device); the supply voltage VCC to VEE is rated to +6V absolute maximum. |
| 3 | IN+ | input | Comparator noninverting input; the input voltage range extends from VEE - 0.2V to VCC + 0.2V (200mV beyond the rails). |
| 4 | REF | bidirectional | 1.245V ±1.5% reference output (typical output impedance 200kΩ, can be bypassed with a low-leakage capacitor) that also serves as the comparator inverting input. |
| 5 | VCC | power_in | Positive supply voltage; the device is guaranteed to operate from 1.8V to 5.5V, with an absolute maximum VCC to VEE of +6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 1.8 | 5.5 | V | 2 | ||
| Supply Current | ICC | 0.75 | 0.8 | µA | 2 | ||
| Supply Current | ICC | 1.3 | µA | 2 | |||
| Input Offset Voltage | VOS | 10 | 15 | mV | 2 | ||
| Input Bias Current | IB | 0.15 | 1 | nA | 2 | ||
| Input Bias Current | IB | 2 | nA | 2 | |||
| Power-Supply Rejection Ratio | PSRR | 0.1 | 1 | mV/V | 2 | ||
| Output Leakage Current | ILEAK | 0.001 | 1 | µA | MAX918 only, VO = 5.5V | 2 | |
| Output-Voltage Swing Low | VOL | 190 | 400 | mV | VCC = 5V, ISINK = 8mA, TA = +25°C | 2 | |
| Output-Voltage Swing Low | VOL | 500 | mV | VCC = 5V, ISINK = 8mA, TA = TMIN to TMAX | 2 | ||
| Output-Voltage Swing Low | VOL | 55 | 200 | mV | VCC = 1.8V, ISINK = 1mA, TA = +25°C | 2 | |
| Output-Voltage Swing Low | VOL | 300 | mV | VCC = 1.8V, ISINK = 1mA, TA = TMIN to TMAX | 2 | ||
| Reference Voltage | VREF | 1.227 | 1.245 | 1.263 | V | 3 | |
| Reference Voltage | VREF | 1.2 | 1.29 | V | 3 | ||
| Reference Load Regulation | ΔVREF/ΔIOUT | -0.2 | 0.2 | mV/nA | ΔIOUT = 10nA | 3 | |
| Reference Voltage Temperature Coefficient | TCREF | 600 | ppm/°C | 3 | |||
| Absolute Maximum Supply Voltage (VCC to VEE) | 6 | V | 2 | ||||
| Output Voltage (MAX918/MAX920 open-drain) | 6 | V | MAX918/MAX920; minimum is (VEE - 0.3V) | 2 | |||
| Current Into Input Pins | -20 | 20 | mA | 2 | |||
| Output Current | -50 | 50 | mA | 2 | |||
| Output Short-Circuit Duration | 10 | sec | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | 2 | ||||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Reference Voltage Temperature Coefficient | TCREF | 95 | ppm/°C | -40°C to +85°C | 10 | ||
| Input-Referred Hysteresis | VHB | 4 | mV | 2 | |||
| Reference Line Regulation | ΔVREF/ΔVCC | 0.1 | mV/V | 3 | |||
| Reference Output Voltage Noise | en | 215 | µVRMS | BW = 10Hz to 100kHz, CREF = 1nF | 3 | ||
| Power-Up Time | tON | 1.2 | ms | 3 | |||
| Fall Time | tFALL | 4 | µs | 3 | |||
| Rise Time | tRISE | 6 | µs | 3 |
CAD (KiCad official)
- Symbol:
MAX918EUK+T - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
max918euk-t-etched.step/max918euk-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max918euk-t.step/max918euk-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (15 pp, sha256
d0087fbd801ae3aa, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX918EUK+T
**Analog Devices Inc./Maxim Integrated** · Comparators · SOT-23-5
MAX918EUK+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output; on the MAX918 this is an open-drain output that can be pulled beyond VCC to an absolute maximum of 6V above VEE, with output voltage limited to (VEE - 0.3V) to +6V. |
| 2 | VEE | power_in | Negative supply voltage (ground reference for the device); the supply voltage VCC to VEE is rated to +6V absolute maximum. |
| 3 | IN+ | input | Comparator noninverting input; the input voltage range extends from VEE - 0.2V to VCC + 0.2V (200mV beyond the rails). |
| 4 | REF | bidirectional | 1.245V ±1.5% reference output (typical output impedance 200kΩ, can be bypassed with a low-leakage capacitor) that also serves as the comparator inverting input. |
| 5 | VCC | power_in | Positive supply voltage; the device is guaranteed to operate from 1.8V to 5.5V, with an absolute maximum VCC to VEE of +6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 1.8 | | 5.5 | V | | 2 |
| Supply Current | ICC | | 0.75 | 0.8 | µA | | 2 |
| Supply Current | ICC | | | 1.3 | µA | | 2 |
| Input Offset Voltage | VOS | | 10 | 15 | mV | | 2 |
| Input Bias Current | IB | | 0.15 | 1 | nA | | 2 |
| Input Bias Current | IB | | | 2 | nA | | 2 |
| Power-Supply Rejection Ratio | PSRR | | 0.1 | 1 | mV/V | | 2 |
| Output Leakage Current | ILEAK | | 0.001 | 1 | µA | MAX918 only, VO = 5.5V | 2 |
| Output-Voltage Swing Low | VOL | | 190 | 400 | mV | VCC = 5V, ISINK = 8mA, TA = +25°C | 2 |
| Output-Voltage Swing Low | VOL | | | 500 | mV | VCC = 5V, ISINK = 8mA, TA = TMIN to TMAX | 2 |
| Output-Voltage Swing Low | VOL | | 55 | 200 | mV | VCC = 1.8V, ISINK = 1mA, TA = +25°C | 2 |
| Output-Voltage Swing Low | VOL | | | 300 | mV | VCC = 1.8V, ISINK = 1mA, TA = TMIN to TMAX | 2 |
| Reference Voltage | VREF | 1.227 | 1.245 | 1.263 | V | | 3 |
| Reference Voltage | VREF | 1.2 | | 1.29 | V | | 3 |
| Reference Load Regulation | ΔVREF/ΔIOUT | -0.2 | | 0.2 | mV/nA | ΔIOUT = 10nA | 3 |
| Reference Voltage Temperature Coefficient | TCREF | | | 600 | ppm/°C | | 3 |
| Absolute Maximum Supply Voltage (VCC to VEE) | | | | 6 | V | | 2 |
| Output Voltage (MAX918/MAX920 open-drain) | | | | 6 | V | MAX918/MAX920; minimum is (VEE - 0.3V) | 2 |
| Current Into Input Pins | | -20 | | 20 | mA | | 2 |
| Output Current | | -50 | | 50 | mA | | 2 |
| Output Short-Circuit Duration | | | | 10 | sec | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (soldering, 10s) | | | | 300 | °C | | 2 |
| Soldering Temperature (reflow) | | | | 260 | °C | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | | 2 |
| Reference Voltage Temperature Coefficient | TCREF | | 95 | | ppm/°C | -40°C to +85°C | 10 |
| Input-Referred Hysteresis | VHB | | 4 | | mV | | 2 |
| Reference Line Regulation | ΔVREF/ΔVCC | | 0.1 | | mV/V | | 3 |
| Reference Output Voltage Noise | en | | 215 | | µVRMS | BW = 10Hz to 100kHz, CREF = 1nF | 3 |
| Power-Up Time | tON | | 1.2 | | ms | | 3 |
| Fall Time | tFALL | | 4 | | µs | | 3 |
| Rise Time | tRISE | | 6 | | µs | | 3 |
## CAD (KiCad official)
- Symbol: `MAX918EUK+T`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `max918euk-t-etched.step` / `max918euk-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max918euk-t.step` / `max918euk-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max917-max920.pdf) (15 pp, sha256 `d0087fbd801ae3aa`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max918euk-t-datasheet.pdf)