Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX918EUK+T

Analog Devices Inc./Maxim Integrated · Comparators · SOT-23-5

MAX918EUK+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Comparator output; on the MAX918 this is an open-drain output that can be pulled beyond VCC to an absolute maximum of 6V above VEE, with output voltage limited to (VEE - 0.3V) to +6V.
2 VEE power_in Negative supply voltage (ground reference for the device); the supply voltage VCC to VEE is rated to +6V absolute maximum.
3 IN+ input Comparator noninverting input; the input voltage range extends from VEE - 0.2V to VCC + 0.2V (200mV beyond the rails).
4 REF bidirectional 1.245V ±1.5% reference output (typical output impedance 200kΩ, can be bypassed with a low-leakage capacitor) that also serves as the comparator inverting input.
5 VCC power_in Positive supply voltage; the device is guaranteed to operate from 1.8V to 5.5V, with an absolute maximum VCC to VEE of +6V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VCC 1.8 5.5 V 2
Supply Current ICC 0.75 0.8 µA 2
Supply Current ICC 1.3 µA 2
Input Offset Voltage VOS 10 15 mV 2
Input Bias Current IB 0.15 1 nA 2
Input Bias Current IB 2 nA 2
Power-Supply Rejection Ratio PSRR 0.1 1 mV/V 2
Output Leakage Current ILEAK 0.001 1 µA MAX918 only, VO = 5.5V 2
Output-Voltage Swing Low VOL 190 400 mV VCC = 5V, ISINK = 8mA, TA = +25°C 2
Output-Voltage Swing Low VOL 500 mV VCC = 5V, ISINK = 8mA, TA = TMIN to TMAX 2
Output-Voltage Swing Low VOL 55 200 mV VCC = 1.8V, ISINK = 1mA, TA = +25°C 2
Output-Voltage Swing Low VOL 300 mV VCC = 1.8V, ISINK = 1mA, TA = TMIN to TMAX 2
Reference Voltage VREF 1.227 1.245 1.263 V 3
Reference Voltage VREF 1.2 1.29 V 3
Reference Load Regulation ΔVREF/ΔIOUT -0.2 0.2 mV/nA ΔIOUT = 10nA 3
Reference Voltage Temperature Coefficient TCREF 600 ppm/°C 3
Absolute Maximum Supply Voltage (VCC to VEE) 6 V 2
Output Voltage (MAX918/MAX920 open-drain) 6 V MAX918/MAX920; minimum is (VEE - 0.3V) 2
Current Into Input Pins -20 20 mA 2
Output Current -50 50 mA 2
Output Short-Circuit Duration 10 sec 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (soldering, 10s) 300 °C 2
Soldering Temperature (reflow) 260 °C 2
Operating Temperature Range -40 85 °C 2
Reference Voltage Temperature Coefficient TCREF 95 ppm/°C -40°C to +85°C 10
Input-Referred Hysteresis VHB 4 mV 2
Reference Line Regulation ΔVREF/ΔVCC 0.1 mV/V 3
Reference Output Voltage Noise en 215 µVRMS BW = 10Hz to 100kHz, CREF = 1nF 3
Power-Up Time tON 1.2 ms 3
Fall Time tFALL 4 µs 3
Rise Time tRISE 6 µs 3

CAD (KiCad official)

  • Symbol: MAX918EUK+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: max918euk-t-etched.step / max918euk-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max918euk-t.step / max918euk-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (15 pp, sha256 d0087fbd801ae3aa, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF