main
Ray
Publish 0.1.0
be3ede3
MAX809SQ293D1T1G
onsemi · Monitors & Reset Circuits · SC-70-3
MAX809SQ293D1T1G from onsemi, in a SC-70-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device; the VCC-to-GND absolute maximum rating is -0.3 to 6.0 V. |
| 2 | RESET | output | Active-low CMOS reset output (MAX809) that stays low while VCC is below the reset threshold and for the reset timeout period after VCC rises above it, with output current limited to 20 mA. |
| 3 | VCC | power_in | Supply voltage monitored by the device, with a VCC range of 1.2 V to 5.5 V and an absolute maximum of -0.3 to 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold (Vin decreasing) | VTH | 2.89 | 2.93 | 2.96 | V | TA = +25°C | 4 |
| Reset Threshold (Vin decreasing) | VTH | 2.85 | 3 | V | TA = -40°C to +85°C | 4 | |
| Reset Threshold (Vin decreasing) | VTH | 2.78 | 3.08 | V | TA = +85°C to +105°C | 4 | |
| VCC Range | VCC | 1 | 5.5 | V | TA = 0°C to +70°C | 4 | |
| VCC Range | VCC | 1.2 | 5.5 | V | TA = -40°C to +105°C | 4 | |
| Reset Active Timeout Period | tRP | 1 | 3.3 | msec | MAX8xxSN(Q)293D1 | 5 | |
| RESET Output Voltage Low (MAX809) | VOL | 0.3 | V | VCC = VTH - 0.2 V, 2.1 V ≤ VTH ≤ 4.0 V, ISINK = 1.2 mA | 5 | ||
| RESET Output Voltage High (MAX809) | VOH | 0.8 | V | VCC = VTH + 0.2 V, 2.5 V ≤ VTH ≤ 4.9 V, ISOURCE = 500 µA (min is 0.8 VCC) | 5 | ||
| Supply Current | ICC | 0.5 | 1.2 | µA | VCC = 3.3 V, TA = -40°C to +85°C | 4 | |
| Supply Current | ICC | 2 | µA | VCC = 3.3 V, TA = 85°C to +105°C | 4 | ||
| Supply Current | ICC | 0.8 | 1.8 | µA | VCC = 5.5 V, TA = -40°C to +85°C | 4 | |
| Supply Current | ICC | 2.5 | µA | VCC = 5.5 V, TA = 85°C to +105°C | 4 | ||
| Detector Voltage Threshold Temperature Coefficient | 30 | ppm/°C | 5 | ||||
| VCC to Reset Delay | 10 | µs | VCC = VTH to (VTH - 100 mV) | 5 | |||
| Power Supply Voltage | VCC | -0.3 | 6 | V | VCC to GND | 3 | |
| Input Current, VCC | 20 | mA | 3 | ||||
| Output Current, RESET | 20 | mA | 3 | ||||
| dV/dt (VCC) | 100 | V/µs | 3 | ||||
| Thermal Resistance, Junction-to-Air | RθJA | 314 | °C/W | SC-70, 35x35x1.6mm FR4 PCB, 10mm2 1 oz copper, natural convection | 3 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Lead Temperature (Soldering, 10 Seconds) | Tsol | 260 | °C | 3 | |||
| ESD Protection HBM | 2000 | V | JESD22-A114 | 3 | |||
| ESD Protection MM | 200 | V | JESD22-A115 | 3 | |||
| Latchup Current Positive | ILatchup | 200 | mA | JESD78 Class II | 3 | ||
| Latchup Current Negative | ILatchup | 200 | mA | JESD78 Class II | 3 | ||
| Operating Temperature | TA | -40 | 105 | °C | Wide operating temperature | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MAX809SQ293D1T1G - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SC-70-3, generated on the KiCad land (body 1.24 x 2.1 mm, terminals on the pads, 0.9 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
max809sq293d1t1g-etched.step/max809sq293d1t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max809sq293d1t1g.step/max809sq293d1t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
63abd722912ca718, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# MAX809SQ293D1T1G
**onsemi** · Monitors & Reset Circuits · SC-70-3
MAX809SQ293D1T1G from onsemi, in a SC-70-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device; the VCC-to-GND absolute maximum rating is -0.3 to 6.0 V. |
| 2 | RESET | output | Active-low CMOS reset output (MAX809) that stays low while VCC is below the reset threshold and for the reset timeout period after VCC rises above it, with output current limited to 20 mA. |
| 3 | VCC | power_in | Supply voltage monitored by the device, with a VCC range of 1.2 V to 5.5 V and an absolute maximum of -0.3 to 6.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold (Vin decreasing) | VTH | 2.89 | 2.93 | 2.96 | V | TA = +25°C | 4 |
| Reset Threshold (Vin decreasing) | VTH | 2.85 | | 3 | V | TA = -40°C to +85°C | 4 |
| Reset Threshold (Vin decreasing) | VTH | 2.78 | | 3.08 | V | TA = +85°C to +105°C | 4 |
| VCC Range | VCC | 1 | | 5.5 | V | TA = 0°C to +70°C | 4 |
| VCC Range | VCC | 1.2 | | 5.5 | V | TA = -40°C to +105°C | 4 |
| Reset Active Timeout Period | tRP | 1 | | 3.3 | msec | MAX8xxSN(Q)293D1 | 5 |
| RESET Output Voltage Low (MAX809) | VOL | | | 0.3 | V | VCC = VTH - 0.2 V, 2.1 V ≤ VTH ≤ 4.0 V, ISINK = 1.2 mA | 5 |
| RESET Output Voltage High (MAX809) | VOH | 0.8 | | | V | VCC = VTH + 0.2 V, 2.5 V ≤ VTH ≤ 4.9 V, ISOURCE = 500 µA (min is 0.8 VCC) | 5 |
| Supply Current | ICC | | 0.5 | 1.2 | µA | VCC = 3.3 V, TA = -40°C to +85°C | 4 |
| Supply Current | ICC | | | 2 | µA | VCC = 3.3 V, TA = 85°C to +105°C | 4 |
| Supply Current | ICC | | 0.8 | 1.8 | µA | VCC = 5.5 V, TA = -40°C to +85°C | 4 |
| Supply Current | ICC | | | 2.5 | µA | VCC = 5.5 V, TA = 85°C to +105°C | 4 |
| Detector Voltage Threshold Temperature Coefficient | | | 30 | | ppm/°C | | 5 |
| VCC to Reset Delay | | | 10 | | µs | VCC = VTH to (VTH - 100 mV) | 5 |
| Power Supply Voltage | VCC | -0.3 | | 6 | V | VCC to GND | 3 |
| Input Current, VCC | | | | 20 | mA | | 3 |
| Output Current, RESET | | | | 20 | mA | | 3 |
| dV/dt (VCC) | | | | 100 | V/µs | | 3 |
| Thermal Resistance, Junction-to-Air | RθJA | | 314 | | °C/W | SC-70, 35x35x1.6mm FR4 PCB, 10mm2 1 oz copper, natural convection | 3 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 3 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 3 |
| Lead Temperature (Soldering, 10 Seconds) | Tsol | | | 260 | °C | | 3 |
| ESD Protection HBM | | | | 2000 | V | JESD22-A114 | 3 |
| ESD Protection MM | | | | 200 | V | JESD22-A115 | 3 |
| Latchup Current Positive | ILatchup | | | 200 | mA | JESD78 Class II | 3 |
| Latchup Current Negative | ILatchup | | | 200 | mA | JESD78 Class II | 3 |
| Operating Temperature | TA | -40 | | 105 | °C | Wide operating temperature | 1 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `MAX809SQ293D1T1G`
- Footprint: `Package_TO_SOT_SMD:SOT-323_SC-70`
- 3D model: SC-70-3, generated on the KiCad land (body 1.24 x 2.1 mm, terminals on the pads, 0.9 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `max809sq293d1t1g-etched.step` / `max809sq293d1t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max809sq293d1t1g.step` / `max809sq293d1t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/max809sq293d1t1-d.pdf) (14 pp, sha256 `63abd722912ca718`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/max809sq293d1t1g-datasheet.pdf)