Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX809SQ293D1T1G

onsemi · Monitors & Reset Circuits · SC-70-3

MAX809SQ293D1T1G from onsemi, in a SC-70-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the device; the VCC-to-GND absolute maximum rating is -0.3 to 6.0 V.
2 RESET output Active-low CMOS reset output (MAX809) that stays low while VCC is below the reset threshold and for the reset timeout period after VCC rises above it, with output current limited to 20 mA.
3 VCC power_in Supply voltage monitored by the device, with a VCC range of 1.2 V to 5.5 V and an absolute maximum of -0.3 to 6.0 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package SC-70-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reset Threshold (Vin decreasing) VTH 2.89 2.93 2.96 V TA = +25°C 4
Reset Threshold (Vin decreasing) VTH 2.85 3 V TA = -40°C to +85°C 4
Reset Threshold (Vin decreasing) VTH 2.78 3.08 V TA = +85°C to +105°C 4
VCC Range VCC 1 5.5 V TA = 0°C to +70°C 4
VCC Range VCC 1.2 5.5 V TA = -40°C to +105°C 4
Reset Active Timeout Period tRP 1 3.3 msec MAX8xxSN(Q)293D1 5
RESET Output Voltage Low (MAX809) VOL 0.3 V VCC = VTH - 0.2 V, 2.1 V ≤ VTH ≤ 4.0 V, ISINK = 1.2 mA 5
RESET Output Voltage High (MAX809) VOH 0.8 V VCC = VTH + 0.2 V, 2.5 V ≤ VTH ≤ 4.9 V, ISOURCE = 500 µA (min is 0.8 VCC) 5
Supply Current ICC 0.5 1.2 µA VCC = 3.3 V, TA = -40°C to +85°C 4
Supply Current ICC 2 µA VCC = 3.3 V, TA = 85°C to +105°C 4
Supply Current ICC 0.8 1.8 µA VCC = 5.5 V, TA = -40°C to +85°C 4
Supply Current ICC 2.5 µA VCC = 5.5 V, TA = 85°C to +105°C 4
Detector Voltage Threshold Temperature Coefficient 30 ppm/°C 5
VCC to Reset Delay 10 µs VCC = VTH to (VTH - 100 mV) 5
Power Supply Voltage VCC -0.3 6 V VCC to GND 3
Input Current, VCC 20 mA 3
Output Current, RESET 20 mA 3
dV/dt (VCC) 100 V/µs 3
Thermal Resistance, Junction-to-Air RθJA 314 °C/W SC-70, 35x35x1.6mm FR4 PCB, 10mm2 1 oz copper, natural convection 3
Operating Junction Temperature Range TJ -40 125 °C 3
Storage Temperature Range Tstg -65 150 °C 3
Lead Temperature (Soldering, 10 Seconds) Tsol 260 °C 3
ESD Protection HBM 2000 V JESD22-A114 3
ESD Protection MM 200 V JESD22-A115 3
Latchup Current Positive ILatchup 200 mA JESD78 Class II 3
Latchup Current Negative ILatchup 200 mA JESD78 Class II 3
Operating Temperature TA -40 105 °C Wide operating temperature 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MAX809SQ293D1T1G
  • Footprint: Package_TO_SOT_SMD:SOT-323_SC-70
  • 3D model: SC-70-3, generated on the KiCad land (body 1.24 x 2.1 mm, terminals on the pads, 0.9 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: max809sq293d1t1g-etched.step / max809sq293d1t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max809sq293d1t1g.step / max809sq293d1t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 63abd722912ca718, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF