main
Ray
max706pcsa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
e9619f0
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209
{
"schema_version": 1,
"type": "component",
"slug": "max706pcsa",
"title": "MAX706PCSA",
"brief": "MSKSEMI Supervisor and Reset ICs, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"max706pcsa"
],
"component": {
"mpn": "MAX706PCSA",
"manufacturer": "MSKSEMI",
"package": "SOP-8",
"pin_count": 8,
"category": "PMIC",
"subcategory": "Supervisor and Reset ICs",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2305231111_MSKSEMI-MAX706PCSA_C6454432.pdf",
"parts": {
"symbol": "max706pcsa.kicad_sym",
"footprint": "max706pcsa.kicad_mod",
"model_3d": "max706pcsa-etched.glb",
"model_3d_plain": "max706pcsa.glb",
"model_3d_step": "max706pcsa-etched.step",
"model_3d_step_plain": "max706pcsa.step",
"lbr": "max706pcsa.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "!MR",
"type": "input",
"description": "Manual reset input, active-low. Internally pulled up to VCC through a nominal 20 kΩ resistor (10-40 kΩ). Pulling this pin low for at least tMR (150 ns @ VCC≥4.5V, 500 ns for P/R/S/T at low VCC) asserts the reset outputs."
},
{
"number": "2",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input. Operating range 3.0V-5.5V for the P version (706P/R). Reset threshold is 2.63V (typ) with 40 mV hysteresis; ICC ≈ 75 µA typ (140 µA max)."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground reference for supply and all I/O."
},
{
"number": "4",
"name": "PFI",
"type": "input",
"description": "Power-fail comparator inverting input. Referenced to the internal 1.25V bandgap (1.20V-1.30V). Input current ±25 nA max. Used with an external divider to monitor a battery or secondary rail; drives !PFO low when PFI falls below 1.25V."
},
{
"number": "5",
"name": "!PFO",
"type": "output",
"description": "Power-fail comparator output, active-low push-pull. VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)."
},
{
"number": "6",
"name": "WDI",
"type": "input",
"description": "Watchdog input. Must be toggled within tWD (1.6 s typ, 2.25 s max) or a reset is generated. Leave floating (high-Z) to disable the watchdog. Minimum pulse width tWP = 50 ns @ VCC≥4.5V; input current ±150 µA max."
},
{
"number": "7",
"name": "RESET",
"type": "output",
"description": "Active-HIGH reset output (706P version outputs RESET, not !RESET). Asserted while VCC is below the 2.63V threshold and held high for tRS = 200 ms (typ) after VCC rises above threshold, or while !MR is low, or when a watchdog timeout occurs. Push-pull: VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 3.2 mA sink."
},
{
"number": "8",
"name": "!WDO",
"type": "output",
"description": "Watchdog output, active-low. Pulses low when the watchdog timer expires (WDI not toggled within tWD). VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V)."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2305231111_MSKSEMI-MAX706PCSA_C6454432.pdf",
"pages": 20,
"sha256": "a5d1d68be0f7c959",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "max706pcsa.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max706pcsa-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d82f0843604c9b6008e540dce0a09504a6adaba77d65127fa6da947e7232272a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "MSKSEMI",
"Package": "SOP-8",
"Category": "PMIC",
"Pins": "8"
}
},
"variants": [
{
"mpn": "MAX706PCSACPA",
"kind": "packaging"
},
{
"mpn": "MAX706PCSA",
"kind": "packaging"
},
{
"mpn": "MAX706PCSAESA",
"kind": "packaging"
},
{
"mpn": "MAX706PCSACUA",
"kind": "packaging"
},
{
"mpn": "MAX706PCSAEUA",
"kind": "packaging"
}
],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"max706pcsa"
],
"discovery_pitch": "MAX706PCSA (MSKSEMI) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max706pcsa.kicad_sym",
"max706pcsa.kicad_mod",
"max706pcsa.glb",
"max706pcsa.step",
"max706pcsa.lbr",
"docs/hero.png",
"docs/max706pcsa-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-28T18:34:25.818Z"
}