Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX706PCSA

MSKSEMI · Supervisor and Reset ICs · SOP-8

MAX706PCSA from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 !MR input Manual reset input, active-low. Internally pulled up to VCC through a nominal 20 kΩ resistor (10-40 kΩ). Pulling this pin low for at least tMR (150 ns @ VCC≥4.5V, 500 ns for P/R/S/T at low VCC) asserts the reset outputs.
2 VCC power_in Supply voltage input. Operating range 3.0V-5.5V for the P version (706P/R). Reset threshold is 2.63V (typ) with 40 mV hysteresis; ICC ≈ 75 µA typ (140 µA max).
3 GND power_in Ground reference for supply and all I/O.
4 PFI input Power-fail comparator inverting input. Referenced to the internal 1.25V bandgap (1.20V-1.30V). Input current ±25 nA max. Used with an external divider to monitor a battery or secondary rail; drives !PFO low when PFI falls below 1.25V.
5 !PFO output Power-fail comparator output, active-low push-pull. VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V).
6 WDI input Watchdog input. Must be toggled within tWD (1.6 s typ, 2.25 s max) or a reset is generated. Leave floating (high-Z) to disable the watchdog. Minimum pulse width tWP = 50 ns @ VCC≥4.5V; input current ±150 µA max.
7 RESET output Active-HIGH reset output (706P version outputs RESET, not !RESET). Asserted while VCC is below the 2.63V threshold and held high for tRS = 200 ms (typ) after VCC rises above threshold, or while !MR is low, or when a watchdog timeout occurs. Push-pull: VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 3.2 mA sink.
8 !WDO output Watchdog output, active-low. Pulses low when the watchdog timer expires (WDI not toggled within tWD). VOH ≥ VCC−1.5V @ 800 µA source; VOL ≤ 0.4V @ 1.2 mA sink (4.5V<VCC<5.5V).

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MAX706PCSACPA
  • MAX706PCSA
  • MAX706PCSAESA
  • MAX706PCSACUA
  • MAX706PCSAEUA

CAD (KiCad official)

  • Symbol: MAX706PCSA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: max706pcsa-etched.step / max706pcsa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max706pcsa.step / max706pcsa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (20 pp, sha256 a5d1d68be0f7c959, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF