main
Ray Publish 0.1.0 148c939
{
  "slug": "max6966aee",
  "version": "0.1.0",
  "type": "component",
  "description": "Maxim Integrated LED Drivers, QSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "max6966aee+",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max6966aee.kicad_sym",
    "max6966aee.kicad_mod",
    "max6966aee.glb",
    "max6966aee.step",
    "max6966aee.lbr",
    "docs/hero.png",
    "docs/max6966aee-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max6966aee-hero.glb",
    "max6966aee-hero.overlay.json",
    "max6966aee-etched.glb"
  ],
  "component": {
    "mpn": "MAX6966AEE+",
    "manufacturer": "Maxim Integrated",
    "package": "QSOP-16-150mil",
    "pin_count": 16,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/max6966-max6967.pdf",
    "parts": {
      "symbol": "max6966aee.kicad_sym",
      "footprint": "max6966aee.kicad_mod",
      "model_3d": "max6966aee-hero.glb",
      "model_3d_plain": "max6966aee-etched.glb",
      "model_3d_step": "max6966aee-etched.step",
      "model_3d_step_plain": "max6966aee.step",
      "lbr": "max6966aee.lbr"
    },
    "distributor_links": {
      "lcsc": "C1523798",
      "digikey": "MAX6966AEE+-ND",
      "mouser": "700-MAX6966AEE"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:47:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MAX6966AEE+-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX6966AEE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SCLK",
        "type": "input",
        "description": "Serial-clock input that shifts data into the shift register on its rising edge and clocks data out of DOUT on its falling edge, active only while CS is low."
      },
      {
        "number": "2",
        "name": "CS",
        "type": "input",
        "description": "Chip-select input; serial data is loaded into the shift register while CS is low, and the most recent 16 bits latch on its rising edge."
      },
      {
        "number": "3",
        "name": "P0",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "4",
        "name": "P1",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "5",
        "name": "P2",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "6",
        "name": "P3",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "7",
        "name": "P4",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; connect to the system ground and bypass V+ to it with a 0.1µF ceramic capacitor."
      },
      {
        "number": "9",
        "name": "P5",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "10",
        "name": "P6",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "11",
        "name": "P7",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "12",
        "name": "P8",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "13",
        "name": "P9",
        "type": "bidirectional",
        "description": "I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V."
      },
      {
        "number": "14",
        "name": "DOUT/OSC",
        "type": "bidirectional",
        "description": "Serial-data output (push-pull) valid 15.5 clock cycles after DIN, or OSC square-wave CMOS clock input up to 100kHz; the MAX6966 powers up as DOUT and the MAX6967 powers up as OSC."
      },
      {
        "number": "15",
        "name": "DIN",
        "type": "input",
        "description": "Serial-data input that loads into the internal 16-bit shift register on SCLK's rising edge."
      },
      {
        "number": "16",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply voltage for 2.25V to 3.6V operation; bypass to GND with a 0.1µF ceramic capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: DOUT/OSC pin type depends on the variant: it is a push-pull output on the MAX6966 (default DOUT) and",
          "5/16 pins cited to the wrong page (name found elsewhere): ['5:P2@p6', '9:P5@p6', '10:P6@p6', '11:P7@p6']"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0235,
        "at": "2026-10-28T15:47:06"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/max6966-max6967.pdf",
        "pages": 28,
        "sha256": "8d195ff40537777f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max6966aee.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.42
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "14e9adcd9b6d1d5b282a866123ac59b68abf20b62a41cc9cecabd5c819d8f17d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max6966aee-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.42
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad220c80323eea8f5da1182e5449fac42239d66ab2e5b3749db97e7bacdc2b2",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}