main
History Download
Ray Publish 0.1.0 148c939

MAX6966AEE+

Maxim Integrated · LED Drivers · QSOP-16-150mil

MAX6966AEE+ from Maxim Integrated, in a QSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Serial-clock input that shifts data into the shift register on its rising edge and clocks data out of DOUT on its falling edge, active only while CS is low.
2 CS input Chip-select input; serial data is loaded into the shift register while CS is low, and the most recent 16 bits latch on its rising edge.
3 P0 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
4 P1 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
5 P2 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
6 P3 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
7 P4 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
8 GND power_in Ground; connect to the system ground and bypass V+ to it with a 0.1µF ceramic capacitor.
9 P5 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
10 P6 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
11 P7 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
12 P8 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
13 P9 bidirectional I/O port configurable as an open-drain current-sink output rated 20mA maximum, a CMOS logic input, or an open-drain logic output; loads must connect to a supply no higher than 7V.
14 DOUT/OSC bidirectional Serial-data output (push-pull) valid 15.5 clock cycles after DIN, or OSC square-wave CMOS clock input up to 100kHz; the MAX6966 powers up as DOUT and the MAX6967 powers up as OSC.
15 DIN input Serial-data input that loads into the internal 16-bit shift register on SCLK's rising edge.
16 V+ power_in Positive supply voltage for 2.25V to 3.6V operation; bypass to GND with a 0.1µF ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package QSOP-16-150mil
Category Display Modules / LED Drivers / Display Drivers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Voltage V+ 2.25 3.6 V 2
Output Load External Supply Voltage P0-P9 VEXT 7 V 2
Standby Current (TA = +25°C) ISTBY 0.7 1.5 µA TA = +25°C; CS at V+; other digital inputs at V+ or GND; interface idle, CS run disabled, PWM disabled, all ports high impedance 2
Standby Current (TA = TMIN to +85°C) ISTBY 1.7 µA TA = TMIN to +85°C; CS at V+; other digital inputs at V+ or GND 2
Standby Current (TA = TMIN to TMAX) ISTBY 1.9 µA TA = TMIN to TMAX; CS at V+; other digital inputs at V+ or GND 2
Supply Current Interface Only (TA = +25°C) I+ 390 620 µA TA = +25°C; fSCLK = 26MHz, other digital inputs at V+ or GND; DOUT unloaded 2
Supply Current Interface Only (TA = TMIN to +85°C) I+ 680 µA TA = TMIN to +85°C; fSCLK = 26MHz, other digital inputs at V+ or GND; DOUT unloaded 2
Supply Current Interface Only (TA = TMIN to TMAX) I+ 730 µA TA = TMIN to TMAX; fSCLK = 26MHz, other digital inputs at V+ or GND; DOUT unloaded 2
Delta Supply Current per 10mA Port (TA = +25°C) ΔI+10 1.58 1.8 mA TA = +25°C; interface idle, global current register 0x07, one port output register 0x02 with current bit cleared, others 0x00/0x01/0xFF; digital inputs at V+ or GND 2
Delta Supply Current per 10mA Port (TA = TMIN to +85°C) ΔI+10 1.9 mA TA = TMIN to +85°C; interface idle, global current register 0x07; digital inputs at V+ or GND 2
Delta Supply Current per 10mA Port (TA = TMIN to TMAX) ΔI+10 2 mA TA = TMIN to TMAX; interface idle, global current register 0x07; digital inputs at V+ or GND 2
Delta Supply Current per 20mA Port (TA = +25°C) ΔI+20 3.2 3.6 mA TA = +25°C; interface idle, global current register 0x07, one port output register 0x02 with current bit set, others 0x00/0x01/0xFF; digital inputs at V+ or GND 2
Delta Supply Current per 20mA Port (TA = TMIN to +85°C) ΔI+20 3.8 mA TA = TMIN to +85°C; interface idle, global current register 0x07; digital inputs at V+ or GND 2
Delta Supply Current per 20mA Port (TA = TMIN to TMAX) ΔI+20 4 mA TA = TMIN to TMAX; interface idle, global current register 0x07; digital inputs at V+ or GND 2
Input High Voltage (P0-P9, DIN, SCLK, CS, OSC) VIH 0.7 x V+ P0-P9: output register set to 0x01 3
Input Low Voltage (P0-P9, DIN, SCLK, CS, OSC) VIL 0.3 x V+ P0-P9: output register set to 0x01 3
Input Leakage Current (P0-P9, DIN, SCLK, CS, OSC) IIH, IIL -0.2 0.2 µA 3
Port Nominal Sink Constant Current (TA = +25°C, 20mA range) IOUT 19.3 20 21.1 mA TA = +25°C; global current register 0x07; output register set to 0x02; V+ = 3.3V; VEXT - VLED = 1V to 2.5V 3
Port Nominal Sink Constant Current (TA = +25°C, 10mA range) IOUT 9.5 10 10.7 mA TA = +25°C; global current register 0x07; output register set to 0x02; V+ = 3.3V; VEXT - VLED = 1V to 2.5V 3
Port Nominal Sink Constant Current (TA = TMIN to +85°C, 20mA range) IOUT 18.8 21.8 mA TA = TMIN to +85°C; global current register 0x07; output register set to 0x02; V+ = 3.3V; VEXT - VLED = 1V to 2.5V 3
Port Nominal Sink Constant Current (TA = TMIN to +85°C, 10mA range) IOUT 9.1 11 mA TA = TMIN to +85°C; global current register 0x07; output register set to 0x02; V+ = 3.3V; VEXT - VLED = 1V to 2.5V 3
Port Logic Output Low Voltage VOLP_ 0.4 V Output register set to 0x00, ISINK = 0.5mA 3
Port Logic Output Low Short-Circuit Current 10.8 20 mA Output register set to 0x00, VOLP_ = 5V 3
Port Slew Time 2 µs From 20% current to 80% current 3
Port Sink Constant-Current Matching (20mA) ΔIOUT -4 4 % TA = +25°C, V+ = 3.3V, VEXT - VLED = 1.4V, IOUT = 20mA 3
Port Sink Constant-Current Matching (10mA) ΔIOUT -5 5 % TA = +25°C, V+ = 3.3V, VEXT - VLED = 1.4V, IOUT = 10mA 3
Output Low Voltage (DOUT) VOLDOUT 0.3 V ISINK = 6mA 3
Internal PWM Clock Frequency fINT 27000 45000 Hz 4
External PWM Clock Frequency fOSC 100 kHz 4
SCLK Clock Period tCP 38.4 ns 4
SCLK Pulse Width High tCH 19 ns 4
SCLK Pulse Width Low tCL 19 ns 4
CS Fall to SCLK Rise Setup Time tCSS 9.5 ns 4
SCLK Rise to CS Rise Hold Time tCSH 0 ns 4
DIN Setup Time tDS 9.5 ns 4
DIN Hold Time tDH 0 ns 4
Output Data Propagation Delay tDO 21 ns 4
DOUT Output Rise and Fall Times tFT 10 ns CLOAD = 20pF 4
Minimum CS Pulse High tCSW 38.4 ns 4
CS Pulse Low to Not Activate CS Run tCSRUN 640 µs CS run enabled 4
CS Pulse Width to Activate CS Run tCSRUN 3 ms CS run enabled 4
Supply Voltage (absolute maximum) V+ -0.3 4 V Voltage with respect to GND 2
Logic Input/Output Voltage SCLK, DIN, CS, DOUT/OSC -0.3 V Upper limit V+ + 0.3V 2
Port Voltage P_ P_ -0.3 8 V Voltage with respect to GND 2
DC Current into DOUT/OSC 10 mA 2
Operating Temperature Range TA -40 125 °C TMIN to TMAX 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature 300 °C Soldering, 10s 2

CAD (KiCad official)

  • Symbol: MAX6966AEE+
  • Footprint: Package_SO:QSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: QSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: max6966aee-etched.step / max6966aee-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6966aee.step / max6966aee.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (28 pp, sha256 8d195ff40537777f, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF