main
Ray Publish 0.1.0 b70d201

MAX6734KASHD3+T

Maxim Integrated · Monitors & Reset Circuits · SOT-23-8

MAX6734KASHD3+T from Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST output Active-low reset output; on the MAX6734 it is open-drain and requires an external pullup, asserting low when VCC1 or VCC2 falls below its threshold, RSTIN drops below its 626mV reference, or MR is driven low.
2 GND power_in Ground reference for the device.
3 WDI input Watchdog input; if WDI stays high or low longer than the watchdog timeout period (35s min after reset, 1.12s min in normal mode) WDO asserts low, and connecting it to ground through a 100k (max) resistor is needed if it is not driven.
4 WDO output Active-low open-drain watchdog output on the MAX6734 that asserts low when no WDI edge occurs within the timeout period or when an undervoltage condition exists on VCC1, VCC2, or RSTIN, and requires an external pullup.
5 MR input Active-low manual reset input with a 50kΩ (25 to 80kΩ) internal pullup to VCC1; RST stays asserted while MR is low and for the reset timeout period after it releases high, and MR can be left open if unused.
6 VCC2 power_in Secondary supply input (0.8V to 5.5V operating range) that is the input to the secondary reset threshold monitor and powers the device when it is greater than VCC1.
7 RSTIN input High-impedance undervoltage reset comparator input with a 626mV threshold (611 to 642mV) that must remain at or below VCC1; connect it to VCC1 or VCC2 if unused.
8 VCC1 power_in Primary supply input (0.8V to 5.5V operating range) that is the input to the primary reset threshold monitor and powers the device when it is greater than VCC2.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOT-23-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC1, VCC2 0.8 5.5 V 2
Operating Temperature Range -40 85 °C 2
Supply Current ICC1 15 39 µA VCC1 < +5.5V, all I/O connections open, outputs not asserted 2
Supply Current ICC1 10 28 µA VCC1 < +3.6V, all I/O connections open, outputs not asserted 2
Supply Current ICC2 4 11 µA VCC2 < +3.6V, all I/O connections open, outputs not asserted 2
Supply Current ICC2 3 9 µA VCC2 < +2.75V, all I/O connections open, outputs not asserted 2
VCC1 Reset Threshold VTH1 2.85 2.925 3 V S (falling) 2
VCC2 Reset Threshold VTH2 1.275 1.313 1.35 V H (falling) 3
Reset Timeout Period tRP 140 210 280 ms D3 3
RSTIN Input Threshold VRSTIN 611 626.5 642 mV 3
RSTIN Input Current IRSTIN -25 25 nA 3
MR Pullup Resistance 25 50 80 kΩ 3
MR Minimum Pulse Width 1 µs 3
Watchdog Timeout Period (first period after reset) tWD-L 35 54 72 s First watchdog period after reset timeout period 4
Watchdog Timeout Period (normal mode) tWD-S 1.12 1.68 2.24 s Normal mode 4
WDI Pulse Width tWDI 50 ns Note 3 4
WDI Input Current IWDI -1 1 µA WDI = 0 or VCC1 4
RST/WDO Output Low Voltage VOL 0.3 V VCC1 or VCC2 ≥ +0.8V, ISINK = 1µA, output asserted 4
RST/WDO Output Low Voltage VOL 0.4 V VCC1 or VCC2 ≥ +4.5V, ISINK = 3.2mA, output asserted 4
RST/WDO Open-Drain Leakage Current 0.5 µA Output not asserted 4
Absolute Max: VCC1, VCC2, RSTIN, MR, WDI to GND -0.3 6 V 2
Absolute Max: RST, WDO to GND (open drain) -0.3 6 V Open drain 2
Input/Output Current (all pins) 20 mA 2
Storage Temperature Range -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature (soldering) 300 °C Soldering, 10s 2
Soldering Temperature (reflow) 260 °C Lead (Pb)-free packages 2

CAD (KiCad official)

  • Symbol: MAX6734KASHD3+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: max6734kashd3-t-etched.step / max6734kashd3-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6734kashd3-t.step / max6734kashd3-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (14 pp, sha256 45944d696334e9d9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF