Generated by kicad-footprint-generator · KiCad file format 20260206
MAX6734KASHD3+T
Maxim Integrated · Monitors & Reset Circuits · SOT-23-8
MAX6734KASHD3+T from Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low reset output; on the MAX6734 it is open-drain and requires an external pullup, asserting low when VCC1 or VCC2 falls below its threshold, RSTIN drops below its 626mV reference, or MR is driven low. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | WDI | input | Watchdog input; if WDI stays high or low longer than the watchdog timeout period (35s min after reset, 1.12s min in normal mode) WDO asserts low, and connecting it to ground through a 100k (max) resistor is needed if it is not driven. |
| 4 | WDO | output | Active-low open-drain watchdog output on the MAX6734 that asserts low when no WDI edge occurs within the timeout period or when an undervoltage condition exists on VCC1, VCC2, or RSTIN, and requires an external pullup. |
| 5 | MR | input | Active-low manual reset input with a 50kΩ (25 to 80kΩ) internal pullup to VCC1; RST stays asserted while MR is low and for the reset timeout period after it releases high, and MR can be left open if unused. |
| 6 | VCC2 | power_in | Secondary supply input (0.8V to 5.5V operating range) that is the input to the secondary reset threshold monitor and powers the device when it is greater than VCC1. |
| 7 | RSTIN | input | High-impedance undervoltage reset comparator input with a 626mV threshold (611 to 642mV) that must remain at or below VCC1; connect it to VCC1 or VCC2 if unused. |
| 8 | VCC1 | power_in | Primary supply input (0.8V to 5.5V operating range) that is the input to the primary reset threshold monitor and powers the device when it is greater than VCC2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC1, VCC2 | 0.8 | 5.5 | V | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Supply Current | ICC1 | 15 | 39 | µA | VCC1 < +5.5V, all I/O connections open, outputs not asserted | 2 | |
| Supply Current | ICC1 | 10 | 28 | µA | VCC1 < +3.6V, all I/O connections open, outputs not asserted | 2 | |
| Supply Current | ICC2 | 4 | 11 | µA | VCC2 < +3.6V, all I/O connections open, outputs not asserted | 2 | |
| Supply Current | ICC2 | 3 | 9 | µA | VCC2 < +2.75V, all I/O connections open, outputs not asserted | 2 | |
| VCC1 Reset Threshold | VTH1 | 2.85 | 2.925 | 3 | V | S (falling) | 2 |
| VCC2 Reset Threshold | VTH2 | 1.275 | 1.313 | 1.35 | V | H (falling) | 3 |
| Reset Timeout Period | tRP | 140 | 210 | 280 | ms | D3 | 3 |
| RSTIN Input Threshold | VRSTIN | 611 | 626.5 | 642 | mV | 3 | |
| RSTIN Input Current | IRSTIN | -25 | 25 | nA | 3 | ||
| MR Pullup Resistance | 25 | 50 | 80 | kΩ | 3 | ||
| MR Minimum Pulse Width | 1 | µs | 3 | ||||
| Watchdog Timeout Period (first period after reset) | tWD-L | 35 | 54 | 72 | s | First watchdog period after reset timeout period | 4 |
| Watchdog Timeout Period (normal mode) | tWD-S | 1.12 | 1.68 | 2.24 | s | Normal mode | 4 |
| WDI Pulse Width | tWDI | 50 | ns | Note 3 | 4 | ||
| WDI Input Current | IWDI | -1 | 1 | µA | WDI = 0 or VCC1 | 4 | |
| RST/WDO Output Low Voltage | VOL | 0.3 | V | VCC1 or VCC2 ≥ +0.8V, ISINK = 1µA, output asserted | 4 | ||
| RST/WDO Output Low Voltage | VOL | 0.4 | V | VCC1 or VCC2 ≥ +4.5V, ISINK = 3.2mA, output asserted | 4 | ||
| RST/WDO Open-Drain Leakage Current | 0.5 | µA | Output not asserted | 4 | |||
| Absolute Max: VCC1, VCC2, RSTIN, MR, WDI to GND | -0.3 | 6 | V | 2 | |||
| Absolute Max: RST, WDO to GND (open drain) | -0.3 | 6 | V | Open drain | 2 | ||
| Input/Output Current (all pins) | 20 | mA | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | Soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | Lead (Pb)-free packages | 2 |
CAD (KiCad official)
- Symbol:
MAX6734KASHD3+T - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
max6734kashd3-t-etched.step/max6734kashd3-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6734kashd3-t.step/max6734kashd3-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (14 pp, sha256
45944d696334e9d9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).