MAX6650EUB+

{
  "slug": "max6650eub",
  "version": "0.1.0",
  "type": "component",
  "description": "Maxim Integrated Motor Driver ICs, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "max6650eub+",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max6650eub.kicad_sym",
    "max6650eub.kicad_mod",
    "max6650eub.glb",
    "max6650eub.step",
    "max6650eub.lbr",
    "docs/hero.png",
    "docs/max6650eub-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max6650eub-hero.glb",
    "max6650eub-hero.overlay.json",
    "max6650eub-etched.glb"
  ],
  "component": {
    "mpn": "MAX6650EUB+",
    "manufacturer": "Maxim Integrated",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Power Management ICs",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6650-MAX6651.pdf",
    "parts": {
      "symbol": "max6650eub.kicad_sym",
      "footprint": "max6650eub.kicad_mod",
      "model_3d": "max6650eub-hero.glb",
      "model_3d_plain": "max6650eub-etched.glb",
      "model_3d_step": "max6650eub-etched.step",
      "model_3d_step_plain": "max6650eub.step",
      "lbr": "max6650eub.lbr"
    },
    "distributor_links": {
      "lcsc": "C143561",
      "digikey": "MAX6650EUB+-ND",
      "mouser": "700-MAX6650EUB"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T17:51:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MAX6650EUB+-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX6650EUB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TACH0",
        "type": "input",
        "description": "Tachometer input used to close the loop around the fan tachometer, with input impedance of 70 kΩ to 150 kΩ specified for 0 < VTACH < 9V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "3",
        "name": "SDA",
        "type": "bidirectional",
        "description": "2-wire serial-data input/output, open drain, for the SMBus/I2C-compatible interface."
      },
      {
        "number": "4",
        "name": "SCL",
        "type": "input",
        "description": "2-wire serial clock input for the SMBus/I2C-compatible interface."
      },
      {
        "number": "5",
        "name": "ADD",
        "type": "input",
        "description": "Slave address select input; pin-strapping to GND, VCC, high-Z or 10kΩ to GND selects one of four slave addresses per Table 1."
      },
      {
        "number": "6",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "General-purpose input/output, open drain, configurable as a FULL ON output or as a general-purpose input, with 10 mA sink capability."
      },
      {
        "number": "7",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "General-purpose input/output, open drain, configurable as a general input/output or an active-low ALERT output, with 10 mA sink capability."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "output",
        "description": "Output that drives the external MOSFET or bipolar transistor gate or base to regulate the voltage across the fan."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input, +3.0V to +5.5V."
      },
      {
        "number": "10",
        "name": "FB",
        "type": "input",
        "description": "Feedback input that closes the loop around the external MOSFET or bipolar transistor; FB is rated to +13.2V maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 8,
        "cost_usd": 0.015,
        "at": "2026-11-02T17:51:33"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6650-MAX6651.pdf",
        "pages": 25,
        "sha256": "cee9d3417b77f26f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max6650eub.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max6650eub-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8255087ff30fdb15433faf0258257124e272e60b27ff8dbb16cecfb9d1c20cd",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}