main
History Download
Ray Publish 0.1.0 6a28ba9

MAX663CSA+

Maxim Integrated · Linear Voltage Regulators (LDO) · SOIC-8

MAX663CSA+ from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SENSE input Current limit sense input that sets the limit via external RCL (threshold 0.5V for MAX663), connected to the output if current limiting is not used, with a terminal voltage limit of GND -0.3V to VIN +0.3V.
2 VOUT2 power_out Regulator output used for high current operation (40mA output current, 50mA absolute maximum source current), with VOUT1 left unconnected in that case and tied to VOUT1 for low-current, low-dropout use.
3 VOUT1 power_out Regulator output for low current, low dropout operation (25mA absolute maximum source current), which must be connected to VOUT2 when used.
4 GND power_in Ground pin of the regulator.
5 SHDN input Shutdown input that disables the output for minimum power consumption, with below 0.3V = on and above 1.4V = off, and it should be grounded for normal operation.
6 VSET input Ground this pin for the fixed 5V output or connect it to an external resistive divider for an adjustable output, with a reference voltage of 1.27V to 1.33V.
7 VTC output Temperature-proportional voltage output for a negative TC output (typically 0.9V at 25°C, +2.5mV/°C), with -20mA absolute maximum sink current, left unconnected when not used.
8 VIN (POS) power_in Regulator input with an operating range of 2.0V to 16.5V (over temperature C) and an absolute maximum supply voltage of +18V.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOIC-8
Category Power Supply Chip
Pins 8

CAD (KiCad official)

  • Symbol: MAX663CSA+
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max663csa-etched.step / max663csa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max663csa.step / max663csa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (8 pp, sha256 087f3f725ad9f2fe, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF