Generated by kicad-footprint-generator · KiCad file format 20260206
MAX663CSA+
Maxim Integrated · Linear Voltage Regulators (LDO) · SOIC-8
MAX663CSA+ from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Current limit sense input that sets the limit via external RCL (threshold 0.5V for MAX663), connected to the output if current limiting is not used, with a terminal voltage limit of GND -0.3V to VIN +0.3V. |
| 2 | VOUT2 | power_out | Regulator output used for high current operation (40mA output current, 50mA absolute maximum source current), with VOUT1 left unconnected in that case and tied to VOUT1 for low-current, low-dropout use. |
| 3 | VOUT1 | power_out | Regulator output for low current, low dropout operation (25mA absolute maximum source current), which must be connected to VOUT2 when used. |
| 4 | GND | power_in | Ground pin of the regulator. |
| 5 | SHDN | input | Shutdown input that disables the output for minimum power consumption, with below 0.3V = on and above 1.4V = off, and it should be grounded for normal operation. |
| 6 | VSET | input | Ground this pin for the fixed 5V output or connect it to an external resistive divider for an adjustable output, with a reference voltage of 1.27V to 1.33V. |
| 7 | VTC | output | Temperature-proportional voltage output for a negative TC output (typically 0.9V at 25°C, +2.5mV/°C), with -20mA absolute maximum sink current, left unconnected when not used. |
| 8 | VIN (POS) | power_in | Regulator input with an operating range of 2.0V to 16.5V (over temperature C) and an absolute maximum supply voltage of +18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MAX663CSA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max663csa-etched.step/max663csa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max663csa.step/max663csa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (8 pp, sha256
087f3f725ad9f2fe, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).