Generated by kicad-footprint-generator · KiCad file format 20260206
MAX6575LZUT+T
Analog Devices Inc./Maxim Integrated · IC · SOT-23-6
MAX6575LZUT+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply voltage, operating from +2.7V to +5.5V (absolute maximum -0.3V to +6V), with a 0.1µF ceramic bypass capacitor recommended close to the pin. |
| 2 | GND | power_in | Ground. |
| 3 | N.C. | unconnected | No connect; connect pin to GND or leave open. |
| 4 | TS0 | input | Time-select pin that sets the time delay factor (with TS1) by connecting to VDD or GND, with VIL max 0.8V and VIH min 2.3V (see Table 1). |
| 5 | TS1 | input | Time-select pin that sets the time delay factor (with TS0) by connecting to VDD or GND, with VIL max 0.8V and VIH min 2.3V (see Table 1). |
| 6 | I/O | bidirectional | Open-drain bidirectional interface pin requiring a pullup resistor; the delay between an external low trigger pulse and the device pulling I/O low is proportional to absolute temperature (°K), with abs max -0.3V to +6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Range | VDD | 2.7 | 5.5 | V | 2 | ||
| Supply Current | IDD | 150 | 250 | µA | VDD = 5.5V, TA = -40°C to +85°C | 2 | |
| Supply Current | IDD | 400 | µA | VDD = 5.5V, TA = -40°C to +125°C | 2 | ||
| Temperature Sensor Error | -7.5 | 1.1 | 7.5 | °C | TA = -20°C | 2 | |
| Temperature Sensor Error | -5.5 | 0.9 | 5.5 | °C | TA = 0°C | 2 | |
| Temperature Sensor Error | -3 | 0.8 | 3 | °C | TA = +25°C | 2 | |
| Temperature Sensor Error | -4.5 | 0.5 | 4.5 | °C | TA = +85°C | 2 | |
| Temperature Sensor Error | -5 | 0.5 | 5 | °C | TA = +125°C | 2 | |
| Reset Pulse Width | tRESET | 4.6 | 16 | ms | Figure 1 (Note 2) | 2 | |
| Setup Time | tSETUP | 10 | µs | Figure 1 | 2 | ||
| Start Pulse | tSTART | 2.5 | µs | Figure 1, TA = +25°C (Note 3) | 2 | ||
| Delay Time from Trigger to Ready | tREADY | 520 | ms | Figure 1 (Note 4) | 2 | ||
| Glitch Immunity on I/O Input | 500 | ns | 2 | ||||
| Time-Select Pin Input Low Voltage | VIL | 0.8 | V | 2 | |||
| Time-Select Pin Input High Voltage | VIH | 2.3 | V | 2 | |||
| I/O Output Voltage Low | VOL | 0.4 | V | VDD > 4.5V, ISINK = 3.2mA | 2 | ||
| I/O Output Voltage Low | VOL | 0.3 | V | VDD > 2.7V, ISINK = 1.2mA | 2 | ||
| I/O Input Voltage Low | VIL | 0.8 | V | 2 | |||
| I/O Input Voltage High | VIH | 2.3 | V | 2 | |||
| Terminal Voltage VDD | VDD | -0.3 | 6 | V | with respect to GND | 2 | |
| Terminal Voltage TS1, TS0 | -0.3 | 6 | V | -0.3V to (VDD + 0.3V) | 2 | ||
| Terminal Voltage I/O | -0.3 | 6 | V | with respect to GND | 2 | ||
| Input/Output Current, All Pins | -20 | 20 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10s | 2 | |||
| Output Pulse Delay tD1 | tD1 | 5 | µs | MAX6575L, T in °K, VTS1 = GND, VTS0 = GND (printed 5T) | 2 | ||
| Output Pulse Delay tD2 | tD2 | 20 | µs | MAX6575L, T in °K, VTS1 = GND, VTS0 = VDD (printed 20T) | 2 | ||
| Output Pulse Delay tD3 | tD3 | 40 | µs | MAX6575L, T in °K, VTS1 = VDD, VTS0 = GND (printed 40T) | 2 | ||
| Output Pulse Delay tD4 | tD4 | 80 | µs | MAX6575L, T in °K, VTS1 = VDD, VTS0 = VDD (printed 80T) | 2 | ||
| Output Pulse Low Time | tL1-8 | 5 | µs | Figure 1 (printed 5T) | 2 |
CAD (KiCad official)
- Symbol:
MAX6575LZUT+T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
max6575lzut-t-etched.step/max6575lzut-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6575lzut-t.step/max6575lzut-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (10 pp, sha256
f6d4027116572b4c, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).