Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX6575LZUT+T

Analog Devices Inc./Maxim Integrated · IC · SOT-23-6

MAX6575LZUT+T from Analog Devices Inc./Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply voltage, operating from +2.7V to +5.5V (absolute maximum -0.3V to +6V), with a 0.1µF ceramic bypass capacitor recommended close to the pin.
2 GND power_in Ground.
3 N.C. unconnected No connect; connect pin to GND or leave open.
4 TS0 input Time-select pin that sets the time delay factor (with TS1) by connecting to VDD or GND, with VIL max 0.8V and VIH min 2.3V (see Table 1).
5 TS1 input Time-select pin that sets the time delay factor (with TS0) by connecting to VDD or GND, with VIL max 0.8V and VIH min 2.3V (see Table 1).
6 I/O bidirectional Open-drain bidirectional interface pin requiring a pullup resistor; the delay between an external low trigger pulse and the device pulling I/O low is proportional to absolute temperature (°K), with abs max -0.3V to +6V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOT-23-6
Category
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Range VDD 2.7 5.5 V 2
Supply Current IDD 150 250 µA VDD = 5.5V, TA = -40°C to +85°C 2
Supply Current IDD 400 µA VDD = 5.5V, TA = -40°C to +125°C 2
Temperature Sensor Error -7.5 1.1 7.5 °C TA = -20°C 2
Temperature Sensor Error -5.5 0.9 5.5 °C TA = 0°C 2
Temperature Sensor Error -3 0.8 3 °C TA = +25°C 2
Temperature Sensor Error -4.5 0.5 4.5 °C TA = +85°C 2
Temperature Sensor Error -5 0.5 5 °C TA = +125°C 2
Reset Pulse Width tRESET 4.6 16 ms Figure 1 (Note 2) 2
Setup Time tSETUP 10 µs Figure 1 2
Start Pulse tSTART 2.5 µs Figure 1, TA = +25°C (Note 3) 2
Delay Time from Trigger to Ready tREADY 520 ms Figure 1 (Note 4) 2
Glitch Immunity on I/O Input 500 ns 2
Time-Select Pin Input Low Voltage VIL 0.8 V 2
Time-Select Pin Input High Voltage VIH 2.3 V 2
I/O Output Voltage Low VOL 0.4 V VDD > 4.5V, ISINK = 3.2mA 2
I/O Output Voltage Low VOL 0.3 V VDD > 2.7V, ISINK = 1.2mA 2
I/O Input Voltage Low VIL 0.8 V 2
I/O Input Voltage High VIH 2.3 V 2
Terminal Voltage VDD VDD -0.3 6 V with respect to GND 2
Terminal Voltage TS1, TS0 -0.3 6 V -0.3V to (VDD + 0.3V) 2
Terminal Voltage I/O -0.3 6 V with respect to GND 2
Input/Output Current, All Pins -20 20 mA 2
Operating Temperature Range -40 125 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C soldering, 10s 2
Output Pulse Delay tD1 tD1 5 µs MAX6575L, T in °K, VTS1 = GND, VTS0 = GND (printed 5T) 2
Output Pulse Delay tD2 tD2 20 µs MAX6575L, T in °K, VTS1 = GND, VTS0 = VDD (printed 20T) 2
Output Pulse Delay tD3 tD3 40 µs MAX6575L, T in °K, VTS1 = VDD, VTS0 = GND (printed 40T) 2
Output Pulse Delay tD4 tD4 80 µs MAX6575L, T in °K, VTS1 = VDD, VTS0 = VDD (printed 80T) 2
Output Pulse Low Time tL1-8 5 µs Figure 1 (printed 5T) 2

CAD (KiCad official)

  • Symbol: MAX6575LZUT+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: max6575lzut-t-etched.step / max6575lzut-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6575lzut-t.step / max6575lzut-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (10 pp, sha256 f6d4027116572b4c, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF