main
Ray
Publish 0.1.0
f399d13
MAX640ESA+T
Maxim Integrated · DC-DC Converters · SOIC-8
MAX640ESA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | input | Sense input for regulated-output operation, internally connected to an on-chip voltage divider and the variable duty-cycle oscillator, and must be connected to the external regulated output. |
| 2 | LBO | output | Low-battery output: an open-drain N-channel MOSFET sinks current when the voltage at LBI drops below 1.28V, with LBO output current rated at 10mA maximum. |
| 3 | LBI | input | Low-battery input: when the voltage at LBI drops below 1.28V, LBO sinks current. |
| 4 | GND | power_in | Ground. |
| 5 | LX | output | Drain of a PMOS power switch whose source is connected to V+; LX drives the external inductor, which provides current to the load, with LX output current rated at 1A maximum. |
| 6 | V+ | power_in | Positive supply-voltage input that should not exceed 11.5V (supply voltage range 4.0V to 11.5V). |
| 7 | VFB | input | Dual-mode feedback pin: when grounded, the internal divider sets the output to 5V (MAX639), 3.3V (MAX640) or 3V (MAX653); for adjustable operation, connect to an external voltage divider. |
| 8 | SHDN | input | Active-low shutdown input: below 0.8V the LX switch stays off and the regulator shuts down, above 2V the regulator stays on, and it should be tied to V+ if shutdown mode is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 4 | 11.5 | V | 2 | |||
| Output Voltage (Note 2) | VOUT | 3.17 | 3.3 | 3.43 | V | MAX640, V+ = 4.0V to 11.5V, 0mA < IOUT < 100mA | 2 |
| Supply Current | 10 | 20 | µA | SHDN = V+, no load | 2 | ||
| Dropout Voltage | 0.5 | V | 2 | ||||
| SHDN Threshold | 0.8 | 1.15 | 2 | V | 3 | ||
| SHDN Pull-Up Current | 0.1 | 0.2 | 0.4 | µA | SHDN = 0V | 3 | |
| VFB Threshold | VFB | 1.24 | 1.28 | 1.32 | V | MAX6_ _E/M | 3 |
| LBI Threshold | LBI | 1.24 | 1.28 | 1.32 | V | MAX6_ _E/M | 3 |
| VFB Bias Current | VFB | 4 | 15 | nA | VFB = 2V | 3 | |
| LBI Bias Current | LBI | 2 | 10 | nA | VLBI = 2V | 3 | |
| LBO Leakage Current | LBO | 0.001 | 0.1 | µA | VLBO = 11.5V | 3 | |
| V+ Supply Voltage (absolute maximum) | V+ | 12 | V | 2 | |||
| LBI, LBO, VFB, SHDN, VOUT Pin Voltage | -0.3 | V | Upper limit printed as (V+ + 0.3V); no fixed numeric max | 2 | |||
| LX Output Current (Note 1) | 1 | A | Note 1: peak inductor current must be limited to 600mA with inductor of 100µH or greater | 2 | |||
| LBO Output Current | 10 | mA | 2 | ||||
| Operating Temperature Range (E grade) | TA | -40 | 85 | °C | MAX639E_ _ (E grade ordering row; MAX640ESA is E grade) | 2 | |
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX640ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max640esa-t-etched.step/max640esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max640esa-t.step/max640esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (13 pp, sha256
30db1538034bc05e, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX640ESA+T
**Maxim Integrated** · DC-DC Converters · SOIC-8
MAX640ESA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | input | Sense input for regulated-output operation, internally connected to an on-chip voltage divider and the variable duty-cycle oscillator, and must be connected to the external regulated output. |
| 2 | LBO | output | Low-battery output: an open-drain N-channel MOSFET sinks current when the voltage at LBI drops below 1.28V, with LBO output current rated at 10mA maximum. |
| 3 | LBI | input | Low-battery input: when the voltage at LBI drops below 1.28V, LBO sinks current. |
| 4 | GND | power_in | Ground. |
| 5 | LX | output | Drain of a PMOS power switch whose source is connected to V+; LX drives the external inductor, which provides current to the load, with LX output current rated at 1A maximum. |
| 6 | V+ | power_in | Positive supply-voltage input that should not exceed 11.5V (supply voltage range 4.0V to 11.5V). |
| 7 | VFB | input | Dual-mode feedback pin: when grounded, the internal divider sets the output to 5V (MAX639), 3.3V (MAX640) or 3V (MAX653); for adjustable operation, connect to an external voltage divider. |
| 8 | SHDN | input | Active-low shutdown input: below 0.8V the LX switch stays off and the regulator shuts down, above 2V the regulator stays on, and it should be tied to V+ if shutdown mode is not used. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | | 4 | | 11.5 | V | | 2 |
| Output Voltage (Note 2) | VOUT | 3.17 | 3.3 | 3.43 | V | MAX640, V+ = 4.0V to 11.5V, 0mA < IOUT < 100mA | 2 |
| Supply Current | | | 10 | 20 | µA | SHDN = V+, no load | 2 |
| Dropout Voltage | | | | 0.5 | V | | 2 |
| SHDN Threshold | | 0.8 | 1.15 | 2 | V | | 3 |
| SHDN Pull-Up Current | | 0.1 | 0.2 | 0.4 | µA | SHDN = 0V | 3 |
| VFB Threshold | VFB | 1.24 | 1.28 | 1.32 | V | MAX6_ _E/M | 3 |
| LBI Threshold | LBI | 1.24 | 1.28 | 1.32 | V | MAX6_ _E/M | 3 |
| VFB Bias Current | VFB | | 4 | 15 | nA | VFB = 2V | 3 |
| LBI Bias Current | LBI | | 2 | 10 | nA | VLBI = 2V | 3 |
| LBO Leakage Current | LBO | | 0.001 | 0.1 | µA | VLBO = 11.5V | 3 |
| V+ Supply Voltage (absolute maximum) | V+ | | | 12 | V | | 2 |
| LBI, LBO, VFB, SHDN, VOUT Pin Voltage | | -0.3 | | | V | Upper limit printed as (V+ + 0.3V); no fixed numeric max | 2 |
| LX Output Current (Note 1) | | | | 1 | A | Note 1: peak inductor current must be limited to 600mA with inductor of 100µH or greater | 2 |
| LBO Output Current | | | | 10 | mA | | 2 |
| Operating Temperature Range (E grade) | TA | -40 | | 85 | °C | MAX639E_ _ (E grade ordering row; MAX640ESA is E grade) | 2 |
| Storage Temperature Range | | -65 | | 160 | °C | | 2 |
| Lead Temperature (soldering) | | | | 300 | °C | soldering, 10s | 2 |
## CAD (KiCad official)
- Symbol: `MAX640ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max640esa-t-etched.step` / `max640esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max640esa-t.step` / `max640esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max639-max653.pdf) (13 pp, sha256 `30db1538034bc05e`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max640esa-t-datasheet.pdf)