Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX640ESA+T

Maxim Integrated · DC-DC Converters · SOIC-8

MAX640ESA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT input Sense input for regulated-output operation, internally connected to an on-chip voltage divider and the variable duty-cycle oscillator, and must be connected to the external regulated output.
2 LBO output Low-battery output: an open-drain N-channel MOSFET sinks current when the voltage at LBI drops below 1.28V, with LBO output current rated at 10mA maximum.
3 LBI input Low-battery input: when the voltage at LBI drops below 1.28V, LBO sinks current.
4 GND power_in Ground.
5 LX output Drain of a PMOS power switch whose source is connected to V+; LX drives the external inductor, which provides current to the load, with LX output current rated at 1A maximum.
6 V+ power_in Positive supply-voltage input that should not exceed 11.5V (supply voltage range 4.0V to 11.5V).
7 VFB input Dual-mode feedback pin: when grounded, the internal divider sets the output to 5V (MAX639), 3.3V (MAX640) or 3V (MAX653); for adjustable operation, connect to an external voltage divider.
8 SHDN input Active-low shutdown input: below 0.8V the LX switch stays off and the regulator shuts down, above 2V the regulator stays on, and it should be tied to V+ if shutdown mode is not used.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage 4 11.5 V 2
Output Voltage (Note 2) VOUT 3.17 3.3 3.43 V MAX640, V+ = 4.0V to 11.5V, 0mA < IOUT < 100mA 2
Supply Current 10 20 µA SHDN = V+, no load 2
Dropout Voltage 0.5 V 2
SHDN Threshold 0.8 1.15 2 V 3
SHDN Pull-Up Current 0.1 0.2 0.4 µA SHDN = 0V 3
VFB Threshold VFB 1.24 1.28 1.32 V MAX6_ _E/M 3
LBI Threshold LBI 1.24 1.28 1.32 V MAX6_ _E/M 3
VFB Bias Current VFB 4 15 nA VFB = 2V 3
LBI Bias Current LBI 2 10 nA VLBI = 2V 3
LBO Leakage Current LBO 0.001 0.1 µA VLBO = 11.5V 3
V+ Supply Voltage (absolute maximum) V+ 12 V 2
LBI, LBO, VFB, SHDN, VOUT Pin Voltage -0.3 V Upper limit printed as (V+ + 0.3V); no fixed numeric max 2
LX Output Current (Note 1) 1 A Note 1: peak inductor current must be limited to 600mA with inductor of 100µH or greater 2
LBO Output Current 10 mA 2
Operating Temperature Range (E grade) TA -40 85 °C MAX639E_ _ (E grade ordering row; MAX640ESA is E grade) 2
Storage Temperature Range -65 160 °C 2
Lead Temperature (soldering) 300 °C soldering, 10s 2

CAD (KiCad official)

  • Symbol: MAX640ESA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max640esa-t-etched.step / max640esa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max640esa-t.step / max640esa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (13 pp, sha256 30db1538034bc05e, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF