MAX6371KA+T

{
  "slug": "max6371ka-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Inc Maxim Integrated Supervisor And Reset ICs, SOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "max6371ka+t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max6371ka-t.kicad_sym",
    "max6371ka-t.kicad_mod",
    "max6371ka-t.glb",
    "max6371ka-t.step",
    "max6371ka-t.lbr",
    "docs/hero.png",
    "docs/max6371ka-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max6371ka-t-hero.glb",
    "max6371ka-t-hero.overlay.json",
    "max6371ka-t-etched.glb"
  ],
  "component": {
    "mpn": "MAX6371KA+T",
    "manufacturer": "Analog Devices Inc Maxim Integrated",
    "package": "SOT-23-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900005361438720",
    "parts": {
      "symbol": "max6371ka-t.kicad_sym",
      "footprint": "max6371ka-t.kicad_mod",
      "model_3d": "max6371ka-t-hero.glb",
      "model_3d_plain": "max6371ka-t-etched.glb",
      "model_3d_step": "max6371ka-t-etched.step",
      "model_3d_step_plain": "max6371ka-t.step",
      "lbr": "max6371ka-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C143547",
      "digikey": "MAX6371KA+TTR-ND",
      "mouser": "700-MAX6371KAT"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T08:21:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MAX6371KA+TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX6371KAT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input: if WDI stays either high or low for the full watchdog timeout period tWD, WDO pulses, and the internal timer clears on each rising or falling WDI edge."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device, with all voltage limits specified with respect to GND."
      },
      {
        "number": "3",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; the datasheet says not to make any connection to this pin."
      },
      {
        "number": "4",
        "name": "SET0",
        "type": "input",
        "description": "Logic input that selects the startup delay and watchdog timeout periods together with SET1 and SET2, per Table 1; must stay within -0.3V to (VCC + 0.3V)."
      },
      {
        "number": "5",
        "name": "SET1",
        "type": "input",
        "description": "Logic input that selects the startup delay and watchdog timeout periods together with SET0 and SET2, per Table 1; must stay within -0.3V to (VCC + 0.3V)."
      },
      {
        "number": "6",
        "name": "SET2",
        "type": "input",
        "description": "Logic input that selects the startup delay and watchdog timeout periods together with SET0 and SET1, per Table 1; must stay within -0.3V to (VCC + 0.3V)."
      },
      {
        "number": "7",
        "name": "WDO",
        "type": "output",
        "description": "Active-low watchdog output that pulses low for tWDO (100ms to 300ms on the open-drain MAX6371) when the watchdog times out, and requires a pull-up resistor (up to +5.5V)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, +2.5V to +5.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is a shared family pin configuration (MAX6369–MAX6374 SOT23 top view) and is not specific; The MAX6371 has an open-drain WDO with a 100ms to 300ms output pulse width (tWDO) and a fixed 60s st; The Pin Configuration figure text extraction is scrambled, so pin positions were confirmed only by t"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0652,
        "at": "2026-10-19T08:19:13"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900005361438720",
        "pages": 11,
        "sha256": "e592e2ff2f316a08",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max6371ka-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b9dc5b435d49868df7491668d5322debfe5d699dbb41c2ad93a41518ec9b5007",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max6371ka-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b03aa83a8aa0affc956141c95502514ef854ce95408701fab088cec9d094018d",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}