MAX6324BUT29+T

{
  "slug": "max6324but29-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Maxim Integrated Monitors & Reset Circuits, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "max6324but29+t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max6324but29-t.kicad_sym",
    "max6324but29-t.kicad_mod",
    "max6324but29-t.glb",
    "max6324but29-t.step",
    "max6324but29-t.lbr",
    "docs/hero.png",
    "docs/max6324but29-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max6324but29-t-hero.glb",
    "max6324but29-t-hero.overlay.json",
    "max6324but29-t-etched.glb"
  ],
  "component": {
    "mpn": "MAX6324BUT29+T",
    "manufacturer": "Maxim Integrated",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management ICs",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/max6323-max6324.pdf",
    "parts": {
      "symbol": "max6324but29-t.kicad_sym",
      "footprint": "max6324but29-t.kicad_mod",
      "model_3d": "max6324but29-t-hero.glb",
      "model_3d_plain": "max6324but29-t-etched.glb",
      "model_3d_step": "max6324but29-t-etched.step",
      "model_3d_step_plain": "max6324but29-t.step",
      "lbr": "max6324but29-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2066174",
      "digikey": "MAX6324BUT29+TTR-ND",
      "mouser": "700-MAX6324BUT29T"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T23:48:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MAX6324BUT29+TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX6324BUT29T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MR",
        "type": "input",
        "description": "Active-low manual reset input that asserts RESET low and clears the watchdog timer when pulled low for at least 1µs; it is internally pulled up to VCC, so it can be left unconnected or tied to VCC if unused."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "3",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input whose falling edges must arrive within the factory-trimmed window; edges that are too fast or too slow cause WDPO to pulse low for 1ms (typ)."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input (operating range 1.2V to 5.5V) that also feeds the VCC reset monitor; bypass with at least 500pF in noisy systems."
      },
      {
        "number": "5",
        "name": "WDPO",
        "type": "output",
        "description": "Open-drain watchdog pulse output that is pulsed low for 1ms (typ) on a fast or slow watchdog fault and is active only while RESET is high; connect a pullup to any supply up to +6V."
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "output",
        "description": "Active-low open-drain reset output that is asserted when VCC falls below VTH or MR is low and stays asserted for the reset timeout (at least 100ms) after VCC rises above VTH; connect a pullup to any supply up to +6V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 14,
        "cost_usd": 0.0626,
        "at": "2026-10-30T23:48:18"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/max6323-max6324.pdf",
        "pages": 14,
        "sha256": "fbe6156c96c1fb0f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max6324but29-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max6324but29-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e73590b2f5ae3578251f4e3fea9571eda29bd9601dd130d8e80daee24a4554d5",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}