main
Ray
Publish 0.1.0
4219795
MAX6070AAUT21+T
Maxim Integrated · Voltage References · SOT-23-6
MAX6070AAUT21+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FILTER | passive | Filter input: connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave unconnected if not used. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable: drive high to enable the device and drive low to disable it. |
| 4 | IN | power_in | Supply input. |
| 5 | OUTS | passive | Voltage reference sense output, connected to OUTF at the point where voltage accuracy is needed. |
| 6 | OUTF | output | Voltage reference force output: short OUTF to OUTS as close as possible to the load and bypass OUTF with a 0.1µF to 10µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (A grade) | -0.04 | 0.04 | % | MAX6070A/MAX6071A, TA = +25°C | 5 | ||
| Output Voltage Temperature Drift (A grade) | TCVOUT | 1.5 | 6 | ppm/°C | MAX6070A/MAX6071A | 5 | |
| Line Regulation, 25°C | 50 | 180 | µV/V | Over specified VIN range, TA = +25°C | 5 | ||
| Line Regulation, TMIN to TMAX | 225 | µV/V | Over specified VIN range, TA = TMIN to TMAX | 5 | |||
| Load Regulation, sink | 135 | 225 | µV/mA | 0mA < IOUT < 10mA, sink | 5 | ||
| Load Regulation, source | 135 | 225 | µV/mA | 0mA < IOUT < 10mA, source | 5 | ||
| Output Current | IOUT | -10 | 10 | mA | 5 | ||
| Supply Voltage | VIN | 2.7 | 5.5 | V | Guaranteed by line regulation | 5 | |
| Quiescent Supply Current, 25°C | IIN | 130 | 200 | µA | TA = +25°C | 5 | |
| Quiescent Supply Current, TMIN to TMAX | IIN | 260 | µA | TA = TMIN to TMAX | 5 | ||
| Shutdown Supply Current | ISD | 6 | µA | 5 | |||
| Enable Input Current | IEN | -1 | 1 | µA | 5 | ||
| Enable Logic-High | VIH | 0.7 | x VIN | 5 | |||
| Enable Logic-Low | VIL | 0.3 | x VIN | 5 | |||
| Capacitive-Load Stability Range | 0.1 | 10 | µF | IOUT ≤ 10mA | 5 | ||
| Short-Circuit Current, sourcing | ISC | 25 | mA | Sourcing to ground | 5 | ||
| Short-Circuit Current, sinking | ISC | 25 | mA | Sinking from VIN | 5 | ||
| Long-Term Stability | 35 | ppm | 1000 hours at TA = +25°C | 5 | |||
| Thermal Hysteresis | 85 | ppm | (Note 4) | 5 | |||
| Noise Voltage 1/f | eOUT | 6.4 | µVP-P | 1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF | 5 | ||
| Noise Voltage thermal (MAX6070) | eOUT | 6.3 | µVRMS | MAX6070 thermal noise, 10Hz to 10kHz, COUT = 0.1µF, CFILTER = 0.1µF | 5 | ||
| Ripple Rejection | 86 | dB | Frequency = 60Hz | 5 | |||
| Turn-On Settling Time (MAX6070) | tR | 6.2 | ms | Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF | 5 | ||
| Enable Settling Time (MAX6070) | tEN | 6.2 | ms | Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF | 5 | ||
| OUTS to GNDS, GNDF, GND | -0.3 | 6 | V | 2 | |||
| IN to GNDS, GNDF, GND | -0.3 | 6 | V | 2 | |||
| EN to GNDS, GNDF, GND | -0.3 | 6 | V | 2 | |||
| Continuous Power Dissipation SOT23 | 347.8 | mW | TA = +70°C, derate 4.3mW/NC above +70°C | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Lead Temperature (soldering, 10s) | 300 | °C | 2 | ||||
| Thermal Resistance Junction to Ambient | θJA | 230 | °C/W | 6 SOT23, multi-layer board | 2 | ||
| Thermal Resistance Junction to Case | θJC | 76 | °C/W | 6 SOT23, multi-layer board | 2 |
CAD (KiCad official)
- Symbol:
MAX6070AAUT21+T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
max6070aaut21-t-etched.step/max6070aaut21-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6070aaut21-t.step/max6070aaut21-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (26 pp, sha256
5b48e6a8cb45c5c4, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX6070AAUT21+T
**Maxim Integrated** · Voltage References · SOT-23-6
MAX6070AAUT21+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FILTER | passive | Filter input: connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave unconnected if not used. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable: drive high to enable the device and drive low to disable it. |
| 4 | IN | power_in | Supply input. |
| 5 | OUTS | passive | Voltage reference sense output, connected to OUTF at the point where voltage accuracy is needed. |
| 6 | OUTF | output | Voltage reference force output: short OUTF to OUTS as close as possible to the load and bypass OUTF with a 0.1µF to 10µF capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (A grade) | | -0.04 | | 0.04 | % | MAX6070A/MAX6071A, TA = +25°C | 5 |
| Output Voltage Temperature Drift (A grade) | TCVOUT | | 1.5 | 6 | ppm/°C | MAX6070A/MAX6071A | 5 |
| Line Regulation, 25°C | | | 50 | 180 | µV/V | Over specified VIN range, TA = +25°C | 5 |
| Line Regulation, TMIN to TMAX | | | | 225 | µV/V | Over specified VIN range, TA = TMIN to TMAX | 5 |
| Load Regulation, sink | | | 135 | 225 | µV/mA | 0mA < IOUT < 10mA, sink | 5 |
| Load Regulation, source | | | 135 | 225 | µV/mA | 0mA < IOUT < 10mA, source | 5 |
| Output Current | IOUT | -10 | | 10 | mA | | 5 |
| Supply Voltage | VIN | 2.7 | | 5.5 | V | Guaranteed by line regulation | 5 |
| Quiescent Supply Current, 25°C | IIN | | 130 | 200 | µA | TA = +25°C | 5 |
| Quiescent Supply Current, TMIN to TMAX | IIN | | | 260 | µA | TA = TMIN to TMAX | 5 |
| Shutdown Supply Current | ISD | | | 6 | µA | | 5 |
| Enable Input Current | IEN | -1 | | 1 | µA | | 5 |
| Enable Logic-High | VIH | 0.7 | | | x VIN | | 5 |
| Enable Logic-Low | VIL | | | 0.3 | x VIN | | 5 |
| Capacitive-Load Stability Range | | 0.1 | | 10 | µF | IOUT ≤ 10mA | 5 |
| Short-Circuit Current, sourcing | ISC | | 25 | | mA | Sourcing to ground | 5 |
| Short-Circuit Current, sinking | ISC | | 25 | | mA | Sinking from VIN | 5 |
| Long-Term Stability | | | 35 | | ppm | 1000 hours at TA = +25°C | 5 |
| Thermal Hysteresis | | | 85 | | ppm | (Note 4) | 5 |
| Noise Voltage 1/f | eOUT | | 6.4 | | µVP-P | 1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF | 5 |
| Noise Voltage thermal (MAX6070) | eOUT | | 6.3 | | µVRMS | MAX6070 thermal noise, 10Hz to 10kHz, COUT = 0.1µF, CFILTER = 0.1µF | 5 |
| Ripple Rejection | | | 86 | | dB | Frequency = 60Hz | 5 |
| Turn-On Settling Time (MAX6070) | tR | | 6.2 | | ms | Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF | 5 |
| Enable Settling Time (MAX6070) | tEN | | 6.2 | | ms | Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF | 5 |
| OUTS to GNDS, GNDF, GND | | -0.3 | | 6 | V | | 2 |
| IN to GNDS, GNDF, GND | | -0.3 | | 6 | V | | 2 |
| EN to GNDS, GNDF, GND | | -0.3 | | 6 | V | | 2 |
| Continuous Power Dissipation SOT23 | | | | 347.8 | mW | TA = +70°C, derate 4.3mW/NC above +70°C | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Soldering Temperature (reflow) | | | | 260 | °C | | 2 |
| Lead Temperature (soldering, 10s) | | | | 300 | °C | | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 230 | | °C/W | 6 SOT23, multi-layer board | 2 |
| Thermal Resistance Junction to Case | θJC | | 76 | | °C/W | 6 SOT23, multi-layer board | 2 |
## CAD (KiCad official)
- Symbol: `MAX6070AAUT21+T`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `max6070aaut21-t-etched.step` / `max6070aaut21-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max6070aaut21-t.step` / `max6070aaut21-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max6070-max6071.pdf) (26 pp, sha256 `5b48e6a8cb45c5c4`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max6070aaut21-t-datasheet.pdf)