Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX6070AAUT21+T

Maxim Integrated · Voltage References · SOT-23-6

MAX6070AAUT21+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FILTER passive Filter input: connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave unconnected if not used.
2 GND power_in Ground.
3 EN input Enable: drive high to enable the device and drive low to disable it.
4 IN power_in Supply input.
5 OUTS passive Voltage reference sense output, connected to OUTF at the point where voltage accuracy is needed.
6 OUTF output Voltage reference force output: short OUTF to OUTS as close as possible to the load and bypass OUTF with a 0.1µF to 10µF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (A grade) -0.04 0.04 % MAX6070A/MAX6071A, TA = +25°C 5
Output Voltage Temperature Drift (A grade) TCVOUT 1.5 6 ppm/°C MAX6070A/MAX6071A 5
Line Regulation, 25°C 50 180 µV/V Over specified VIN range, TA = +25°C 5
Line Regulation, TMIN to TMAX 225 µV/V Over specified VIN range, TA = TMIN to TMAX 5
Load Regulation, sink 135 225 µV/mA 0mA < IOUT < 10mA, sink 5
Load Regulation, source 135 225 µV/mA 0mA < IOUT < 10mA, source 5
Output Current IOUT -10 10 mA 5
Supply Voltage VIN 2.7 5.5 V Guaranteed by line regulation 5
Quiescent Supply Current, 25°C IIN 130 200 µA TA = +25°C 5
Quiescent Supply Current, TMIN to TMAX IIN 260 µA TA = TMIN to TMAX 5
Shutdown Supply Current ISD 6 µA 5
Enable Input Current IEN -1 1 µA 5
Enable Logic-High VIH 0.7 x VIN 5
Enable Logic-Low VIL 0.3 x VIN 5
Capacitive-Load Stability Range 0.1 10 µF IOUT ≤ 10mA 5
Short-Circuit Current, sourcing ISC 25 mA Sourcing to ground 5
Short-Circuit Current, sinking ISC 25 mA Sinking from VIN 5
Long-Term Stability 35 ppm 1000 hours at TA = +25°C 5
Thermal Hysteresis 85 ppm (Note 4) 5
Noise Voltage 1/f eOUT 6.4 µVP-P 1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF 5
Noise Voltage thermal (MAX6070) eOUT 6.3 µVRMS MAX6070 thermal noise, 10Hz to 10kHz, COUT = 0.1µF, CFILTER = 0.1µF 5
Ripple Rejection 86 dB Frequency = 60Hz 5
Turn-On Settling Time (MAX6070) tR 6.2 ms Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF 5
Enable Settling Time (MAX6070) tEN 6.2 ms Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF 5
OUTS to GNDS, GNDF, GND -0.3 6 V 2
IN to GNDS, GNDF, GND -0.3 6 V 2
EN to GNDS, GNDF, GND -0.3 6 V 2
Continuous Power Dissipation SOT23 347.8 mW TA = +70°C, derate 4.3mW/NC above +70°C 2
Operating Temperature Range -40 125 °C 2
Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
Soldering Temperature (reflow) 260 °C 2
Lead Temperature (soldering, 10s) 300 °C 2
Thermal Resistance Junction to Ambient θJA 230 °C/W 6 SOT23, multi-layer board 2
Thermal Resistance Junction to Case θJC 76 °C/W 6 SOT23, multi-layer board 2

CAD (KiCad official)

  • Symbol: MAX6070AAUT21+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: max6070aaut21-t-etched.step / max6070aaut21-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6070aaut21-t.step / max6070aaut21-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (26 pp, sha256 5b48e6a8cb45c5c4, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF