main
History Download
Ray Publish 0.1.0 2b0aae0

MAX485EN

HTC Korea TAEJIN Tech · RS-485 / RS-422 ICs · DIP-8

MAX485EN from HTC Korea TAEJIN Tech, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: driven HIGH when A-B is at or above +0.2V, LOW when A-B is at or below -0.2V, and high-impedance when RE* is HIGH with DE LOW.
2 RE* input Receiver output enable, active low: a logic LOW enables the receiver and a logic HIGH disables it (RO tri-stated).
3 DE input Driver output enable, active high: a logic HIGH enables the differential driver outputs and a logic LOW tri-states them.
4 DI input Driver input: the logic level applied here is driven differentially onto A and B when the driver is enabled.
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting driver output and receiver input, with a receiver common-mode range of -7V to +12V.
7 B bidirectional Inverting driver output and receiver input, with a receiver common-mode range of -7V to +12V.
8 VCC power_in Power supply, 4.75V to 5.25V (recommended operating range).

Key specifications

Parameter Value
Manufacturer HTC Korea TAEJIN Tech
Package DIP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 7 V 3
Control Input Voltage VDE, VRE -0.3 V Printed max is VCC + 0.5 3
Driver Input Voltage VDI -0.3 V Printed max is VCC + 0.5 3
Driver Output Voltage A, B -15 15 V 3
Receiver Input Voltage A, B -15 15 V 3
Receiver Output Voltage VRO -0.3 V Printed max is VCC + 0.5 3
Junction Temperature TJ -40 125 °C 3
Storage Temperature Range TSTG -65 150 °C 3
Supply Voltage VCC 4.75 5.25 V 3
Operating Ambient Temperature Range TA -40 85 °C 3
Differential Driver Output (with load), RS-422 VOD2 2 V RL = 50Ω (RS-422), Figure 1 5
Differential Driver Output (with load), RS-485 VOD2 1.5 V RL = 27Ω (RS-485), Figure 1 5
Change in Magnitude of Driver Differential Output Voltage for Complementary Output States ΔVOD 0.2 V RL = 27Ω or 50Ω, Figure 1 5
Driver Common-Mode Output Voltage VOC 3 V RL = 27Ω or 50Ω, Figure 1 5
Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States ΔVOC 0.2 V RL = 27Ω or 50Ω, Figure 1 5
Input High Voltage VIH 2 V DE, DI, RE* 5
Input Low Voltage VIL 0.8 V DE, DI, RE* 5
Input Current IIN1 -10 10 uA DE, DI, RE* 5
Driver Short-Circuit Current, VO = High IOSD1 -250 250 mA -7V ≤ VO ≤ 12V 5
Driver Short-Circuit Current, VO = Low IOSD2 -250 250 mA -7V ≤ VO ≤ 12V 5
Max. Transmission Rate fMAX 5 Mbps 5
Driver Input to Output (low-to-high) tDPLH 30 60 ns RL = 54Ω, CL1 = CL2 = 100pF; Figure 3 & 5 5
Driver Input to Output (high-to-low) tDPHL 30 60 ns RL = 54Ω, CL1 = CL2 = 100pF; Figure 3 & 5 5
Driver Output Skew to Output tSKEW 5 10 ns 5
Driver Rise or Fall Time tr, tf 15 40 ns 5
Driver Enable to Output High tZH 40 70 ns CL=100pF; S2 closed; Figure 4 & 6 5
Driver Enable to Output Low tZL 40 70 ns CL=100pF; S1 closed; Figure 4 & 6 5
Driver Disable Time from Low tHZ 40 70 ns CL=100pF; S2 closed; Figure 4 & 6 5
Driver Disable Time from High tLZ 40 70 ns CL=100pF; S1 closed; Figure 4 & 6 5
Receiver Differential Threshold Voltage VTH -0.2 0.2 V -7V ≤ VCM ≤ 12V 5
Receiver Output High Voltage VOH 3.5 V IO = -4mA, VID = +200mV 5
Receiver Output Low Voltage VOL 0.4 V IO = +4mA, VID = -200mV 5
Three-State (High Impedance) Output Current at Receiver IOZR -1 1 uA 0.4V ≤ VO ≤ 2.4V, RE* = 5V 5
Receiver Input Resistance RIN 12 15 kΩ -7V ≤ VCM ≤ 12V 5
Input Current (A, B) IIN2 1 mA DE = 0V; VCC = 0V or 5.25V; VIN = 12V 5
Input Current (A, B) IIN2 -0.8 mA DE = 0V; VCC = 0V or 5.25V; VIN = -7V 5
Receiver Short-Circuit Current IOSR 7 95 mA 0V ≤ VO ≤ VCC 5
Receiver Input to Output (low-to-high) tPLH 20 45 100 ns CL = 15pF; S1, S2 open; Figure 2 & 7 6
Receiver Input to Output (high-to-low) tPHL 20 45 100 ns CL = 15pF; S1, S2 open; Figure 2 & 7 6
Differential Receiver Skew tSKD 13 ns /tPLH - tPHL/ Differential 6
Receiver Enable to Output Low tZL 45 70 ns CL = 15pF; S1 closed; Figure 2 & 8 6
Receiver Enable to Output High tZH 45 70 ns CL = 15pF; S2 closed; Figure 2 & 8 6
Receiver Disable Time from Low tLZ 45 70 ns CL = 15pF; S1 closed; Figure 2 & 8 6
Receiver Disable Time from High tHZ 45 70 ns CL = 15pF; S2 closed; Figure 2 & 8 6
No-Load Supply Current ICC 900 uA RE = 0V or VCC; DE = VCC 6
No-Load Supply Current ICC 600 uA RE = 0V or VCC; DE = 0V 6
Receiver Input Hysteresis ΔVTH 20 mV VCM = 0V 5

CAD (KiCad official)

  • Symbol: MAX485EN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: max485en-etched.step / max485en-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max485en.step / max485en.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTC Korea TAEJIN Tech datasheet (10 pp, sha256 774f69f5ba13229b, retrieved 2026-10-15, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF