Generated by kicad-footprint-generator · KiCad file format 20260206
MAX485EN
HTC Korea TAEJIN Tech · RS-485 / RS-422 ICs · DIP-8
MAX485EN from HTC Korea TAEJIN Tech, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: driven HIGH when A-B is at or above +0.2V, LOW when A-B is at or below -0.2V, and high-impedance when RE* is HIGH with DE LOW. |
| 2 | RE* | input | Receiver output enable, active low: a logic LOW enables the receiver and a logic HIGH disables it (RO tri-stated). |
| 3 | DE | input | Driver output enable, active high: a logic HIGH enables the differential driver outputs and a logic LOW tri-states them. |
| 4 | DI | input | Driver input: the logic level applied here is driven differentially onto A and B when the driver is enabled. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Non-inverting driver output and receiver input, with a receiver common-mode range of -7V to +12V. |
| 7 | B | bidirectional | Inverting driver output and receiver input, with a receiver common-mode range of -7V to +12V. |
| 8 | VCC | power_in | Power supply, 4.75V to 5.25V (recommended operating range). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | DIP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 7 | V | 3 | |||
| Control Input Voltage | VDE, VRE | -0.3 | V | Printed max is VCC + 0.5 | 3 | ||
| Driver Input Voltage | VDI | -0.3 | V | Printed max is VCC + 0.5 | 3 | ||
| Driver Output Voltage | A, B | -15 | 15 | V | 3 | ||
| Receiver Input Voltage | A, B | -15 | 15 | V | 3 | ||
| Receiver Output Voltage | VRO | -0.3 | V | Printed max is VCC + 0.5 | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Supply Voltage | VCC | 4.75 | 5.25 | V | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Differential Driver Output (with load), RS-422 | VOD2 | 2 | V | RL = 50Ω (RS-422), Figure 1 | 5 | ||
| Differential Driver Output (with load), RS-485 | VOD2 | 1.5 | V | RL = 27Ω (RS-485), Figure 1 | 5 | ||
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ΔVOD | 0.2 | V | RL = 27Ω or 50Ω, Figure 1 | 5 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | RL = 27Ω or 50Ω, Figure 1 | 5 | ||
| Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States | ΔVOC | 0.2 | V | RL = 27Ω or 50Ω, Figure 1 | 5 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE* | 5 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE* | 5 | ||
| Input Current | IIN1 | -10 | 10 | uA | DE, DI, RE* | 5 | |
| Driver Short-Circuit Current, VO = High | IOSD1 | -250 | 250 | mA | -7V ≤ VO ≤ 12V | 5 | |
| Driver Short-Circuit Current, VO = Low | IOSD2 | -250 | 250 | mA | -7V ≤ VO ≤ 12V | 5 | |
| Max. Transmission Rate | fMAX | 5 | Mbps | 5 | |||
| Driver Input to Output (low-to-high) | tDPLH | 30 | 60 | ns | RL = 54Ω, CL1 = CL2 = 100pF; Figure 3 & 5 | 5 | |
| Driver Input to Output (high-to-low) | tDPHL | 30 | 60 | ns | RL = 54Ω, CL1 = CL2 = 100pF; Figure 3 & 5 | 5 | |
| Driver Output Skew to Output | tSKEW | 5 | 10 | ns | 5 | ||
| Driver Rise or Fall Time | tr, tf | 15 | 40 | ns | 5 | ||
| Driver Enable to Output High | tZH | 40 | 70 | ns | CL=100pF; S2 closed; Figure 4 & 6 | 5 | |
| Driver Enable to Output Low | tZL | 40 | 70 | ns | CL=100pF; S1 closed; Figure 4 & 6 | 5 | |
| Driver Disable Time from Low | tHZ | 40 | 70 | ns | CL=100pF; S2 closed; Figure 4 & 6 | 5 | |
| Driver Disable Time from High | tLZ | 40 | 70 | ns | CL=100pF; S1 closed; Figure 4 & 6 | 5 | |
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 5 | |
| Receiver Output High Voltage | VOH | 3.5 | V | IO = -4mA, VID = +200mV | 5 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = +4mA, VID = -200mV | 5 | ||
| Three-State (High Impedance) Output Current at Receiver | IOZR | -1 | 1 | uA | 0.4V ≤ VO ≤ 2.4V, RE* = 5V | 5 | |
| Receiver Input Resistance | RIN | 12 | 15 | kΩ | -7V ≤ VCM ≤ 12V | 5 | |
| Input Current (A, B) | IIN2 | 1 | mA | DE = 0V; VCC = 0V or 5.25V; VIN = 12V | 5 | ||
| Input Current (A, B) | IIN2 | -0.8 | mA | DE = 0V; VCC = 0V or 5.25V; VIN = -7V | 5 | ||
| Receiver Short-Circuit Current | IOSR | 7 | 95 | mA | 0V ≤ VO ≤ VCC | 5 | |
| Receiver Input to Output (low-to-high) | tPLH | 20 | 45 | 100 | ns | CL = 15pF; S1, S2 open; Figure 2 & 7 | 6 |
| Receiver Input to Output (high-to-low) | tPHL | 20 | 45 | 100 | ns | CL = 15pF; S1, S2 open; Figure 2 & 7 | 6 |
| Differential Receiver Skew | tSKD | 13 | ns | /tPLH - tPHL/ Differential | 6 | ||
| Receiver Enable to Output Low | tZL | 45 | 70 | ns | CL = 15pF; S1 closed; Figure 2 & 8 | 6 | |
| Receiver Enable to Output High | tZH | 45 | 70 | ns | CL = 15pF; S2 closed; Figure 2 & 8 | 6 | |
| Receiver Disable Time from Low | tLZ | 45 | 70 | ns | CL = 15pF; S1 closed; Figure 2 & 8 | 6 | |
| Receiver Disable Time from High | tHZ | 45 | 70 | ns | CL = 15pF; S2 closed; Figure 2 & 8 | 6 | |
| No-Load Supply Current | ICC | 900 | uA | RE = 0V or VCC; DE = VCC | 6 | ||
| No-Load Supply Current | ICC | 600 | uA | RE = 0V or VCC; DE = 0V | 6 | ||
| Receiver Input Hysteresis | ΔVTH | 20 | mV | VCM = 0V | 5 |
CAD (KiCad official)
- Symbol:
MAX485EN - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
max485en-etched.step/max485en-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max485en.step/max485en.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (10 pp, sha256
774f69f5ba13229b, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).