main
History Download
Ray Publish 0.1.0 578d61b

MAX3491AEIM

HGSEMI · RS-485/RS-422 ICs · SOP-14

MAX3491AEIM from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N.C. unconnected No internal connection; the pin may be grounded.
2 RO output Receiver output: with RE low, RO goes high when (A - B) is not less than 200 mV and goes low when (A - B) is not greater than -200 mV.
3 RE input Receiver output enable, active low: RO is enabled when RE is low and is high-impedance when RE is high; RE high with DE low puts the device into low-power shutdown, and RE has a hot-plug input structure.
4 DE input Driver output enable: the driver outputs are active when DE is high and high-impedance when DE is low; RE high with DE low puts the device into low-power shutdown, and DE has a hot-plug input structure.
5 DI input Driver input: with DE high, a low on DI drives output A/Y low and B/Z high, and a high on DI drives A/Y high and B/Z low.
6 GND power_in Ground.
7 GND power_in Ground.
8 N.C. unconnected No internal connection; the pin may be grounded.
9 Y output Driver non-inverting output.
10 Z output Driver inverting output.
11 B bidirectional Receiver inverting input (also the driver inverting output B/Z in half-duplex naming).
12 A bidirectional Receiver non-inverting input (also the driver non-inverting output A/Y in half-duplex naming).
13 N.C. unconnected No internal connection; the pin may be grounded.
14 VCC power_in Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; connect a 0.1 µF capacitor to ground.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-14
Category Communication Interface Chip
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 3
Control input voltage RE, DE -0.3 6 V 3
Driver input voltage DI -0.3 6 V 3
Driver output voltage A,B,Y,Z -7 12 V 3
Receiver input voltage A,B -7 12 V 3
Receiver output voltage RO -0.3 V Upper limit printed as VCC+0.3 3
Continuous power dissipation 667 mW TA=+70 C, 14SOP package 3
Operating temperature range TA -40 85 ℃ MAX3491AEI (industrial grade) 3
Storage temperature TSTORE -65 150 ℃ 3
Lead temperature TLEAD 245 ℃ Soldering 10 s 3
Differential driver output voltage VOD 2 V Fig.1, RL=100 ohm (RS-422); max printed as VCC 3
Differential driver output voltage VOD 1.5 V Fig.1, RL=54 ohm (RS-485); max printed as VCC 3
Change in differential driver output voltage magnitude dVOD 0.2 V Fig.1, RL=100 ohm or RL=54 ohm 3
Driver common-mode output voltage VOC 3 V Fig.1, RL=100 ohm or RL=54 ohm; min printed as VCC/2 3
Change in common-mode output voltage magnitude dVOC 0.2 V Fig.1, RL=100 ohm or RL=54 ohm 3
Input high voltage VIH 2 V DE, DI, RE 4
Input low voltage VIL 0.8 V DE, DI 4
Input current IIN -1 1 μA DE, DI, RE 4
Input current (A,B) full duplex IA, IB 125 μA DE=GND, VCC=GND or VCC, VIN=12V 4
Input current (A,B) full duplex IA, IB -75 μA DE=GND, VCC=GND or VCC, VIN=-7V 4
Output leakage current (Y,Z) full duplex IO 125 μA DE=GND, VCC=GND or VCC, VIN=12V 4
Output leakage current (Y,Z) full duplex IO -100 μA DE=GND, VCC=GND or VCC, VIN=-7V 4
Driver short-circuit output current IOSD 250 mA 0 <= VOUT <= 12V 4
Driver short-circuit output current IOSD -250 mA -7 <= VOUT <= VCC 4
Receiver differential threshold voltage VTH -200 200 mV -7V <= VCM <= 12V 4
Receiver output low voltage VOL 0.4 V IO=4mA, VID=-200mV 4
Receiver tri-state output current IOZR -1 1 μA 0 <= VO <= VCC 4
Receiver output short-circuit current IOSR -95 95 mA 0V <= VRO <= VCC 4
Supply current ICC 400 900 μA No load, RE=VCC, DI=GND or VCC, DE=VCC 4
Supply current ICC 330 600 μA No load, RE=VCC, DI=GND or VCC, DE=GND 4
Supply current ICC 400 1000 μA No load, RE=GND, DI=GND or VCC, DE=VCC 4
Supply current ICC 330 800 μA No load, RE=GND, DI=GND or VCC, DE=GND 4
Standby supply current ISHDN 0.05 10 μA DE=GND, RE=VCC 4
Thermal shutdown temperature TTS 165 ℃ 4
Thermal shutdown hysteresis TTSH 15 ℃ 4
Input hysteresis VHYS 100 mV DE, DI, RE 4
Receiver input hysteresis dVTH 15 mV VA+VB=0 4
Receiver input resistance RIN 96 kΩ -7V <= VCM <= 12V 4
Driver propagation delay tDPLH tDPLH 50 ns Fig.2 and 5, RL=54 ohm, CL=50pF 5
Driver propagation delay tDPHL tDPHL 50 ns Fig.2 and 5, RL=54 ohm, CL=50pF 5
Driver skew /tDPLH-tDPHL/ tDSKEW 10 ns Fig.2 and 5, RL=54 ohm, CL=50pF 5
Driver rise/fall time tDR, tDF 20 ns Fig.2 and 5, RL=54 ohm, CL=50pF 5
Maximum data rate (driver) fMAX 16 Mbps 5
Receiver enable to output low tDZL 150 ns Fig.3 and 6, CL=100pF, S3 closed 5
Receiver enable to output high tDZH 150 ns Fig.3 and 6, CL=100pF, S2 closed 5
Receiver low-to-invalid time tDLZ 100 ns Fig.3 and 6, CL=15pF, S2 closed 5
Receiver high-to-invalid time tDHZ 100 ns Fig.3 and 6, CL=15pF, S3 closed 5
Enable from standby to output high tDZH(SHDN) 2200 ns Fig.3 and 6, CL=15pF, S3 closed 5
Enable from standby to output low tDZL(SHDN) 2200 ns Fig.3 and 6, CL=15pF, S2 closed 5
Standby time tSHDN 50 350 700 ns Driver 5
Receiver propagation delay tRPLH, tRPHL 50 ns Fig.7 and 8, CL=15pF, /VID/>=2.0V, VID<=15ns 5
Receiver skew tRSKEW 20 ns Fig.7 and 8, CL=15pF, /VID/>=2.0V, VID<=15ns 5
Receiver enable to output low tRZL 50 ns Fig.4 and 9, S1=-1.3.3V, S2 to VCC 5
Receiver enable to output high tRZH 50 ns Fig.4 and 9, S1=+1.3.3V, S2 to GND 5
Receiver low-to-invalid time tRLZ 50 ns Fig.4 and 9, S1=-1.3.3V, S2 to VCC 5
Receiver high-to-invalid time tRHZ 50 ns Fig.4 and 9, S1=+1.3.3V, S2 to GND 5
Enable from standby to output high (receiver) tRZH(SHDN) 2200 ns Fig.4 and 9, S1=-1.3.3V, S2 to VCC 5
Enable from standby to output low (receiver) tRZL(SHDN) 2200 ns Fig.4 and 9, S1=+1.3.3V, S2 to GND 5

CAD (KiCad official)

  • Symbol: MAX3491AEIM
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: max3491aeim-etched.step / max3491aeim-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3491aeim.step / max3491aeim.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet, copy hosted by JLCPCB (15 pp, sha256 ad5b3a9aae85f547, retrieved 2026-11-21)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF