main
History Download
Ray Publish 0.1.0 cb24aa2

MAX33076EASE+

Analog Devices Inc./Maxim Integrated · RS-485/RS-422 ICs · SOIC-16

MAX33076EASE+ from Analog Devices Inc./Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 B1 input Inverting receiver input for channel 1 that, together with A1, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
2 A1 input Noninverting receiver input for channel 1 that, together with B1, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
3 Y1 output Receiver channel 1 output that goes high for VA-VB ≥ +200mV, low for VA-VB ≤ -200mV, and high under fail-safe open or short conditions.
4 G input Active-high receiver enable that enables all receivers when high; with G low and G high the device enters low-power shutdown with outputs high impedance.
5 Y2 output Receiver channel 2 output that follows the differential input A2-B2 with true fail-safe high output when the inputs are open or shorted.
6 A2 input Noninverting receiver input for channel 2 that, together with B2, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
7 B2 input Inverting receiver input for channel 2 that, together with A2, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
8 GND power_in Ground reference for the device, to which all voltages are referred.
9 B3 input Inverting receiver input for channel 3 that, together with A3, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
10 A3 input Noninverting receiver input for channel 3 that, together with B3, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
11 Y3 output Receiver channel 3 output that follows the differential input A3-B3 with true fail-safe high output when the inputs are open or shorted.
12 G input Active-low receiver enable that enables all receivers when pulled low; with G high and G low the device enters low-power shutdown.
13 Y4 output Receiver channel 4 output that follows the differential input A4-B4 with true fail-safe high output when the inputs are open or shorted.
14 A4 input Noninverting receiver input for channel 4 that, together with B4, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
15 B4 input Inverting receiver input for channel 4 that, together with A4, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground.
16 VCC power_in Supply input operating from 3.0V to 5.5V that should be bypassed to ground with a 0.1µF ceramic capacitor as close to the device as possible.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOIC-16
Category Communication Interface Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply VCC 3 5.5 V 3
Supply Current ICC 9 15 mA G = high, G = low (MAX33076E), no switching, no load 3
Shutdown Current ISHDN 400 650 uA G = low, G = high (MAX33076E), all channels disabled 3
Common-Mode Range VCM -25 25 V 3
Differential Input Threshold VTH -200 200 mV -25V <= VCM <= +25V 3
Input Current (A_, B_) IIN -520 uA VCC = 0V or 5.5V, VIN = -25V 3
Input Current (A_, B_) IIN 520 uA VCC = 0V or 5.5V, VIN = +25V 3
Enable Input Current IINEN -1 1 uA 3
Enable Input High Voltage VIH 2 V 3
Enable Input Low Voltage VIL 0.8 V 3
Output Low Voltage VOL 0.4 V VID = -200mV, IOUT = +3mA 3
Short-Circuit Current ISC -80 80 mA 3
Thermal Shutdown Threshold TSHDN 160 °C Temperature rising 3
ESD Protection (A_, B_) Human Body Model -25 25 kV 3
ESD Protection (A_, B_) IEC 61000-4-2 Air Gap Discharge to GND -4 4 kV 3
ESD Protection (A_, B_) IEC 61000-4-2 Contact Discharge to GND -4 4 kV 3
ESD Protection (All Other Pins) Human Body Model -4 4 kV 3
ESD Protection (All Other Pins) Charge Device Model -4 4 kV 3
Fault Protection Range (A_, B_ Pins to GND) -65 65 V A_, B_ independently or simultaneously 3
Propagation-Delay Skew tSK 20 ns /tPHL - tPLH/ 4
Output Enable Time to Low Level tZL 100 ns RL= 1kΩ, CL= 15pF, Figure 2 4
Output Enable Time to High Level tZH 2000 ns RL= 1kΩ, CL= 15pF, Figure 2 4
Output Disable Time from Low Level tLZ 400 ns RL= 1kΩ, CL= 15pF, Figure 2 4
Output Disable Time from High Level tHZ 400 ns RL= 1kΩ, CL= 15pF, Figure 2 4
Operating Temperature Range -40 125 °C 2
VCC to GND VCC -0.3 6 V 2
G, G, EN12, EN34 to GND -0.3 6 V 2
A_, B_ to GND -70 70 V 2
Maximum Junction Temperature 150 °C 2
Storage Temperature Range -60 150 °C 2
Lead Temperature (Soldering 10s) 300 °C 2
Reflow Temperature 260 °C 2
Junction-to-Ambient Thermal Resistance (SOIC) θJA 75 °C/W Four-layer board 2
Junction-to-Case Thermal Resistance (SOIC) θJC 24 °C/W 2

CAD (KiCad official)

  • Symbol: MAX33076EASE+
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: max33076ease-etched.step / max33076ease-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max33076ease.step / max33076ease.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (18 pp, sha256 01bfcd0e854a2cd1, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF