Generated by kicad-footprint-generator · KiCad file format 20260206
MAX33076EASE+
Analog Devices Inc./Maxim Integrated · RS-485/RS-422 ICs · SOIC-16
MAX33076EASE+ from Analog Devices Inc./Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B1 | input | Inverting receiver input for channel 1 that, together with A1, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 2 | A1 | input | Noninverting receiver input for channel 1 that, together with B1, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 3 | Y1 | output | Receiver channel 1 output that goes high for VA-VB ≥ +200mV, low for VA-VB ≤ -200mV, and high under fail-safe open or short conditions. |
| 4 | G | input | Active-high receiver enable that enables all receivers when high; with G low and G high the device enters low-power shutdown with outputs high impedance. |
| 5 | Y2 | output | Receiver channel 2 output that follows the differential input A2-B2 with true fail-safe high output when the inputs are open or shorted. |
| 6 | A2 | input | Noninverting receiver input for channel 2 that, together with B2, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 7 | B2 | input | Inverting receiver input for channel 2 that, together with A2, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 8 | GND | power_in | Ground reference for the device, to which all voltages are referred. |
| 9 | B3 | input | Inverting receiver input for channel 3 that, together with A3, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 10 | A3 | input | Noninverting receiver input for channel 3 that, together with B3, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 11 | Y3 | output | Receiver channel 3 output that follows the differential input A3-B3 with true fail-safe high output when the inputs are open or shorted. |
| 12 | G | input | Active-low receiver enable that enables all receivers when pulled low; with G high and G low the device enters low-power shutdown. |
| 13 | Y4 | output | Receiver channel 4 output that follows the differential input A4-B4 with true fail-safe high output when the inputs are open or shorted. |
| 14 | A4 | input | Noninverting receiver input for channel 4 that, together with B4, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 15 | B4 | input | Inverting receiver input for channel 4 that, together with A4, receives the RS-485/RS-422 differential signal and withstands ±65V fault voltage to ground. |
| 16 | VCC | power_in | Supply input operating from 3.0V to 5.5V that should be bypassed to ground with a 0.1µF ceramic capacitor as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-16 |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 3 | 5.5 | V | 3 | ||
| Supply Current | ICC | 9 | 15 | mA | G = high, G = low (MAX33076E), no switching, no load | 3 | |
| Shutdown Current | ISHDN | 400 | 650 | uA | G = low, G = high (MAX33076E), all channels disabled | 3 | |
| Common-Mode Range | VCM | -25 | 25 | V | 3 | ||
| Differential Input Threshold | VTH | -200 | 200 | mV | -25V <= VCM <= +25V | 3 | |
| Input Current (A_, B_) | IIN | -520 | uA | VCC = 0V or 5.5V, VIN = -25V | 3 | ||
| Input Current (A_, B_) | IIN | 520 | uA | VCC = 0V or 5.5V, VIN = +25V | 3 | ||
| Enable Input Current | IINEN | -1 | 1 | uA | 3 | ||
| Enable Input High Voltage | VIH | 2 | V | 3 | |||
| Enable Input Low Voltage | VIL | 0.8 | V | 3 | |||
| Output Low Voltage | VOL | 0.4 | V | VID = -200mV, IOUT = +3mA | 3 | ||
| Short-Circuit Current | ISC | -80 | 80 | mA | 3 | ||
| Thermal Shutdown Threshold | TSHDN | 160 | °C | Temperature rising | 3 | ||
| ESD Protection (A_, B_) Human Body Model | -25 | 25 | kV | 3 | |||
| ESD Protection (A_, B_) IEC 61000-4-2 Air Gap Discharge to GND | -4 | 4 | kV | 3 | |||
| ESD Protection (A_, B_) IEC 61000-4-2 Contact Discharge to GND | -4 | 4 | kV | 3 | |||
| ESD Protection (All Other Pins) Human Body Model | -4 | 4 | kV | 3 | |||
| ESD Protection (All Other Pins) Charge Device Model | -4 | 4 | kV | 3 | |||
| Fault Protection Range (A_, B_ Pins to GND) | -65 | 65 | V | A_, B_ independently or simultaneously | 3 | ||
| Propagation-Delay Skew | tSK | 20 | ns | /tPHL - tPLH/ | 4 | ||
| Output Enable Time to Low Level | tZL | 100 | ns | RL= 1kΩ, CL= 15pF, Figure 2 | 4 | ||
| Output Enable Time to High Level | tZH | 2000 | ns | RL= 1kΩ, CL= 15pF, Figure 2 | 4 | ||
| Output Disable Time from Low Level | tLZ | 400 | ns | RL= 1kΩ, CL= 15pF, Figure 2 | 4 | ||
| Output Disable Time from High Level | tHZ | 400 | ns | RL= 1kΩ, CL= 15pF, Figure 2 | 4 | ||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| VCC to GND | VCC | -0.3 | 6 | V | 2 | ||
| G, G, EN12, EN34 to GND | -0.3 | 6 | V | 2 | |||
| A_, B_ to GND | -70 | 70 | V | 2 | |||
| Maximum Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -60 | 150 | °C | 2 | |||
| Lead Temperature (Soldering 10s) | 300 | °C | 2 | ||||
| Reflow Temperature | 260 | °C | 2 | ||||
| Junction-to-Ambient Thermal Resistance (SOIC) | θJA | 75 | °C/W | Four-layer board | 2 | ||
| Junction-to-Case Thermal Resistance (SOIC) | θJC | 24 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
MAX33076EASE+ - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
max33076ease-etched.step/max33076ease-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max33076ease.step/max33076ease.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (18 pp, sha256
01bfcd0e854a2cd1, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).