main
Ray
Set visibility: public
8b3df39
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358
{
"schema_version": 1,
"type": "component",
"slug": "max32664gtgc",
"title": "MAX32664GTGC+",
"brief": "MAXIM INTEGRATED Global Sourcing Parts, TQFN-24-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"global sourcing parts",
"max32664gtgc+",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "MAX32664GTGC+",
"manufacturer": "MAXIM INTEGRATED",
"package": "TQFN-24-EP(3x3)",
"pin_count": 25,
"category": "Global Sourcing Parts",
"subcategory": "Global Sourcing Parts",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX32664.pdf",
"parts": {
"symbol": "max32664gtgc.kicad_sym",
"footprint": "max32664gtgc.kicad_mod",
"model_3d": "max32664gtgc-hero.glb",
"model_3d_plain": "max32664gtgc.glb",
"model_3d_step": "max32664gtgc-etched.step",
"model_3d_step_plain": "max32664gtgc.step",
"lbr": "max32664gtgc.lbr"
},
"distributor_links": {
"lcsc": "C5344734",
"digikey": "505-MAX32664GTGC+-ND",
"mouser": "700-MAX32664GTGC+"
},
"distributor_check": {
"checked_at": "2026-11-12T19:43:08Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-MAX32664GTGC+-ND",
"status": "found"
},
"mouser": {
"pn": "700-MAX32664GTGC+",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "MFIO",
"type": "bidirectional",
"description": "Multifunction I/O that the host asserts low to communicate with the sensor hub, and when held low during reset it enters bootloader mode."
},
{
"number": "2",
"name": "D.N.C.",
"type": "unconnected",
"description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
},
{
"number": "3",
"name": "NC",
"type": "unconnected",
"description": "Not connected to the die and can be used to route any signal."
},
{
"number": "4",
"name": "D.N.C.",
"type": "unconnected",
"description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
},
{
"number": "5",
"name": "D.N.C.",
"type": "unconnected",
"description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
},
{
"number": "6",
"name": "RSTN",
"type": "input",
"description": "External active-low system reset input with an internal pullup to VDD; a noise snubber circuit should be placed as close to the device as possible."
},
{
"number": "7",
"name": "VSS",
"type": "power_in",
"description": "Digital ground for the device."
},
{
"number": "8",
"name": "32KOUT",
"type": "output",
"description": "32.768kHz crystal oscillator output for RTC operation; leave unconnected if an external clock drives 32KIN."
},
{
"number": "9",
"name": "32KIN",
"type": "input",
"description": "32.768kHz crystal oscillator input; a crystal connects between 32KIN and 32KOUT, or an external clock can be driven on 32KIN when 32KOUT is unconnected."
},
{
"number": "10",
"name": "VSS",
"type": "power_in",
"description": "Digital ground for the device."
},
{
"number": "11",
"name": "VDD",
"type": "power_in",
"description": "Digital supply voltage; bypass to VSS with a 1.0μF capacitor as close as possible to the package."
},
{
"number": "12",
"name": "VCORE",
"type": "power_out",
"description": "Core supply voltage; bypass to VSS with a 1.0μF capacitor as close as possible to the package and do not connect to any other circuit."
},
{
"number": "13",
"name": "SENSOR_SDA",
"type": "bidirectional",
"description": "I2C master data line that connects to the SDA of the slave sensors; pullup resistors are required."
},
{
"number": "14",
"name": "SENSOR_SCL",
"type": "bidirectional",
"description": "I2C master clock line that connects to the SCL of the slave sensors; pullup resistors are required."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "Not connected to the die and can be used to route any signal."
},
{
"number": "16",
"name": "D.N.C.",
"type": "unconnected",
"description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
},
{
"number": "17",
"name": "D.N.C.",
"type": "unconnected",
"description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
},
{
"number": "18",
"name": "HR_INT",
"type": "input",
"description": "Input connected to the heart rate/PPG monitor sensor interrupt output."
},
{
"number": "19",
"name": "ACCEL_INT",
"type": "input",
"description": "Input connected to the accelerometer sensor interrupt output."
},
{
"number": "20",
"name": "LDO_EN",
"type": "output",
"description": "LDO enable output connected to the heart rate/PPG monitor sensor LDO enable pin."
},
{
"number": "21",
"name": "GPIO",
"type": "bidirectional",
"description": "General-purpose input/output that is open drain when programmed as an output (active low) and connects to the heart rate/PPG monitor sensor GPIO pin."
},
{
"number": "22",
"name": "VDD",
"type": "power_in",
"description": "Digital supply voltage; bypass to VSS with a 1.0μF capacitor as close as possible to the package."
},
{
"number": "23",
"name": "SLAVE_SDA",
"type": "bidirectional",
"description": "I2C slave data line that connects to the host I2C master SDA."
},
{
"number": "24",
"name": "SLAVE_SCL",
"type": "input",
"description": "I2C slave clock input that connects to the host I2C master SCL."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: MAX32664GTGC+ is Version C in 24-TQFN-EP, and the datasheet gives two Version C 24-TQFN pinouts: I2C; The datasheet gives no per-pin electrical limits beyond the device-level absolute maximum ratings (V"
],
"pages_sent": 24,
"cost_usd": 0.0022,
"at": "2026-11-12T19:42:56"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX32664.pdf",
"pages": 33,
"sha256": "8b84ad33ec5681dc",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.75,
"height_basis": "datasheet A, nominal",
"standoff_mm": 0
},
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "max32664gtgc.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.02,
3.02,
0.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f40ada66da63e167c17edc4c30b7c3421af6fd6f96de85fb8042607092769ab6",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max32664gtgc-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.02,
3.02,
0.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "bfe186fc3dc3659597127a222c0d73f19e1377ee3045a282713687934c0e1465",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "T2433+2C",
"source_page": 31,
"e": {
"nom_mm": 0.4,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "max32664gtgc.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "MAXIM INTEGRATED",
"Package": "TQFN-24-EP(3x3)",
"Category": "Global Sourcing Parts",
"Pins": "25"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"max32664gtgc+"
],
"discovery_pitch": "MAX32664GTGC+ (MAXIM INTEGRATED) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max32664gtgc.kicad_sym",
"max32664gtgc.kicad_mod",
"max32664gtgc.glb",
"max32664gtgc.step",
"max32664gtgc.lbr",
"docs/hero.png",
"docs/max32664gtgc-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"max32664gtgc-hero.glb",
"max32664gtgc-hero.overlay.json"
],
"visibility": {
"public": true
}
}