main
Ray Publish 0.1.0 83d97fd
{
  "slug": "max32664gtgc",
  "version": "0.1.0",
  "type": "component",
  "description": "MAXIM INTEGRATED Global Sourcing Parts, TQFN-24-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "max32664gtgc+",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max32664gtgc.kicad_sym",
    "max32664gtgc.kicad_mod",
    "max32664gtgc.glb",
    "max32664gtgc.step",
    "max32664gtgc.lbr",
    "docs/hero.png",
    "docs/max32664gtgc-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max32664gtgc-hero.glb",
    "max32664gtgc-hero.overlay.json"
  ],
  "component": {
    "mpn": "MAX32664GTGC+",
    "manufacturer": "MAXIM INTEGRATED",
    "package": "TQFN-24-EP(3x3)",
    "pin_count": 25,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX32664.pdf",
    "parts": {
      "symbol": "max32664gtgc.kicad_sym",
      "footprint": "max32664gtgc.kicad_mod",
      "model_3d": "max32664gtgc-hero.glb",
      "model_3d_plain": "max32664gtgc.glb",
      "model_3d_step": "max32664gtgc-etched.step",
      "model_3d_step_plain": "max32664gtgc.step",
      "lbr": "max32664gtgc.lbr"
    },
    "distributor_links": {
      "lcsc": "C5344734",
      "digikey": "505-MAX32664GTGC+-ND",
      "mouser": "700-MAX32664GTGC+"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T19:43:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-MAX32664GTGC+-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX32664GTGC+",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MFIO",
        "type": "bidirectional",
        "description": "Multifunction I/O that the host asserts low to communicate with the sensor hub, and when held low during reset it enters bootloader mode."
      },
      {
        "number": "2",
        "name": "D.N.C.",
        "type": "unconnected",
        "description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected to the die and can be used to route any signal."
      },
      {
        "number": "4",
        "name": "D.N.C.",
        "type": "unconnected",
        "description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
      },
      {
        "number": "5",
        "name": "D.N.C.",
        "type": "unconnected",
        "description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
      },
      {
        "number": "6",
        "name": "RSTN",
        "type": "input",
        "description": "External active-low system reset input with an internal pullup to VDD; a noise snubber circuit should be placed as close to the device as possible."
      },
      {
        "number": "7",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground for the device."
      },
      {
        "number": "8",
        "name": "32KOUT",
        "type": "output",
        "description": "32.768kHz crystal oscillator output for RTC operation; leave unconnected if an external clock drives 32KIN."
      },
      {
        "number": "9",
        "name": "32KIN",
        "type": "input",
        "description": "32.768kHz crystal oscillator input; a crystal connects between 32KIN and 32KOUT, or an external clock can be driven on 32KIN when 32KOUT is unconnected."
      },
      {
        "number": "10",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground for the device."
      },
      {
        "number": "11",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply voltage; bypass to VSS with a 1.0μF capacitor as close as possible to the package."
      },
      {
        "number": "12",
        "name": "VCORE",
        "type": "power_out",
        "description": "Core supply voltage; bypass to VSS with a 1.0μF capacitor as close as possible to the package and do not connect to any other circuit."
      },
      {
        "number": "13",
        "name": "SENSOR_SDA",
        "type": "bidirectional",
        "description": "I2C master data line that connects to the SDA of the slave sensors; pullup resistors are required."
      },
      {
        "number": "14",
        "name": "SENSOR_SCL",
        "type": "bidirectional",
        "description": "I2C master clock line that connects to the SCL of the slave sensors; pullup resistors are required."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected to the die and can be used to route any signal."
      },
      {
        "number": "16",
        "name": "D.N.C.",
        "type": "unconnected",
        "description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
      },
      {
        "number": "17",
        "name": "D.N.C.",
        "type": "unconnected",
        "description": "Internally connected; do not make any electrical connection, including VSS, to this pin."
      },
      {
        "number": "18",
        "name": "HR_INT",
        "type": "input",
        "description": "Input connected to the heart rate/PPG monitor sensor interrupt output."
      },
      {
        "number": "19",
        "name": "ACCEL_INT",
        "type": "input",
        "description": "Input connected to the accelerometer sensor interrupt output."
      },
      {
        "number": "20",
        "name": "LDO_EN",
        "type": "output",
        "description": "LDO enable output connected to the heart rate/PPG monitor sensor LDO enable pin."
      },
      {
        "number": "21",
        "name": "GPIO",
        "type": "bidirectional",
        "description": "General-purpose input/output that is open drain when programmed as an output (active low) and connects to the heart rate/PPG monitor sensor GPIO pin."
      },
      {
        "number": "22",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply voltage; bypass to VSS with a 1.0μF capacitor as close as possible to the package."
      },
      {
        "number": "23",
        "name": "SLAVE_SDA",
        "type": "bidirectional",
        "description": "I2C slave data line that connects to the host I2C master SDA."
      },
      {
        "number": "24",
        "name": "SLAVE_SCL",
        "type": "input",
        "description": "I2C slave clock input that connects to the host I2C master SCL."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MAX32664GTGC+ is Version C in 24-TQFN-EP, and the datasheet gives two Version C 24-TQFN pinouts: I2C; The datasheet gives no per-pin electrical limits beyond the device-level absolute maximum ratings (V"
        ],
        "pages_sent": 24,
        "cost_usd": 0.0022,
        "at": "2026-11-12T19:42:56"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX32664.pdf",
        "pages": 33,
        "sha256": "8b84ad33ec5681dc",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.75,
        "height_basis": "datasheet A, nominal",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max32664gtgc.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          3.02,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f40ada66da63e167c17edc4c30b7c3421af6fd6f96de85fb8042607092769ab6",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max32664gtgc-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          3.02,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bfe186fc3dc3659597127a222c0d73f19e1377ee3045a282713687934c0e1465",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "T2433+2C",
      "source_page": 31,
      "e": {
        "nom_mm": 0.4,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "max32664gtgc.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}