main
Ray
Publish 0.1.0
601eb03
MAX3241EAI+T
Analog Devices Inc Maxim Integrated · RS232 ICs · SSOP-28-208mil
MAX3241EAI+T from Analog Devices Inc Maxim Integrated, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor (C2); capacitor values must not go below the Table 2 minimums for the supply in use. |
| 2 | C2- | passive | Negative terminal of the inverting charge-pump capacitor (C2); capacitor values must not go below the Table 2 minimums for the supply in use. |
| 3 | V- | power_out | Generated -5.5V supply from the inverting charge pump; V+ and V- may each have a maximum magnitude of 7V, with their absolute difference not exceeding 13V. |
| 4 | R1IN | input | RS-232 receiver input 1 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 5 | R2IN | input | RS-232 receiver input 2 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 6 | R3IN | input | RS-232 receiver input 3 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 7 | R4IN | input | RS-232 receiver input 4 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 8 | R5IN | input | RS-232 receiver input 5 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 9 | T1OUT | output | RS-232 transmitter 1 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V. |
| 10 | T2OUT | output | RS-232 transmitter 2 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V. |
| 11 | T3OUT | output | RS-232 transmitter 3 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V. |
| 12 | T3IN | input | TTL/CMOS transmitter 3 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC. |
| 13 | T2IN | input | TTL/CMOS transmitter 2 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC. |
| 14 | T1IN | input | TTL/CMOS transmitter 1 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC. |
| 15 | R5OUT | output | Inverting TTL/CMOS receiver 5 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 16 | R4OUT | output | Inverting TTL/CMOS receiver 4 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 17 | R3OUT | output | Inverting TTL/CMOS receiver 3 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 18 | R2OUT | output | Inverting TTL/CMOS receiver 2 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 19 | R1OUT | output | Inverting TTL/CMOS receiver 1 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 20 | R2OUTB | output | Noninverting complementary receiver 2 output that is always active, regardless of the state of EN or SHDN. |
| 21 | R1OUTB | output | Noninverting complementary receiver 1 output that is always active, regardless of the state of EN or SHDN. |
| 22 | SHDN | input | Active-low shutdown control that turns off the charge pumps and disables the transmitter outputs when low, with shutdown supply current of 10µA maximum; connect to VCC if shutdown is not used. |
| 23 | EN | input | Active-low receiver enable that puts the inverting R_OUT outputs into high-impedance when high, and has no effect on T_OUT or the always-active B outputs. |
| 24 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor (C1); capacitor values must not go below the Table 2 minimums for the supply in use. |
| 25 | GND | power_in | Ground reference for the device. |
| 26 | VCC | power_in | Supply voltage of +3.0V to +5.5V; absolute maximum is -0.3V to +6V. |
| 27 | V+ | power_out | Generated +5.5V supply from the doubling charge pump; V+ may have a maximum magnitude of 7V. |
| 28 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor (C1); capacitor values must not go below the Table 2 minimums for the supply in use. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Power-Supply Current | 0.3 | 1 | mA | No load, VCC = 3.3V or 5.0V, TA = +25°C | 2 | ||
| Shutdown Supply Current | 1 | 10 | µA | SHDN = GND, TA = +25°C | 2 | ||
| Input Logic Threshold Low | 0.8 | V | (Note 3) T_IN, EN, SHDN, MBAUD | 2 | |||
| Input Logic Threshold High | 2 | V | VCC = 3.3V | 2 | |||
| Input Logic Threshold High | 2.4 | V | VCC = 5.0V | 2 | |||
| Input Leakage Current | -1 | 0.01 | 1 | µA | T_IN, EN, SHDN, MBAUD | 2 | |
| Output Leakage Current | -10 | 0.05 | 10 | µA | Receivers disabled | 2 | |
| Output Voltage Low | 0.4 | V | IOUT = 1.6mA | 2 | |||
| Input Voltage Range | -25 | 25 | V | 2 | |||
| Input Resistance | 3 | 5 | 7 | kΩ | TA = +25°C | 3 | |
| Transmitter Output Voltage Swing | -5 | 5.4 | V | All transmitter outputs loaded with 3kΩ to ground | 3 | ||
| Output Resistance | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | |||
| Output Short-Circuit Current | -35 | 60 | mA | 3 | |||
| Mouse Driveability Transmitter Output Voltage | -5 | 5 | V | T1IN = T2IN = GND, T3IN = VCC, T3OUT loaded with 3kΩ to GND, T1OUT and T2OUT loaded with 2.5mA each | 3 | ||
| Maximum Data Rate | 120 | 235 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching | 3 | ||
| Receiver Output Enable Time | 200 | ns | Normal operation | 3 | |||
| Receiver Output Disable Time | 200 | ns | Normal operation | 3 | |||
| Transmitter Skew | / tPHL - tPLH / | 300 | ns | 3 | |||
| Receiver Skew | / tPHL - tPLH / | 300 | ns | 3 | |||
| Transition-Region Slew Rate | 6 | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF | 3 | ||
| Transition-Region Slew Rate | 4 | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF | 3 | ||
| VCC Supply Voltage | VCC | 3 | 5.5 | V | Supply voltage | 2 | |
| Operating Temperature Range (MAX32__E__) | -40 | 85 | °C | E-grade (MAX32_ E _) | 2 | ||
| Required Minimum Capacitor C1 | C1 | 0.1 | µF | VCC = 3.0 to 3.6V | 9 | ||
| Required Minimum Capacitor C2, C3, C4 | C2, C3, C4 | 0.1 | µF | VCC = 3.0 to 3.6V | 9 | ||
| Required Minimum Capacitor C1 | C1 | 0.047 | µF | VCC = 4.5 to 5.5V | 9 | ||
| Required Minimum Capacitor C2, C3, C4 | C2, C3, C4 | 0.33 | µF | VCC = 4.5 to 5.5V | 9 | ||
| Required Minimum Capacitor C2, C3, C4 | C2, C3, C4 | 0.47 | µF | VCC = 3.0 to 5.5V | 9 | ||
| VCC Supply Voltage (absolute) | VCC | -0.3 | 6 | V | 2 | ||
| V+ Output Voltage (absolute) | V+ | -0.3 | 7 | V | Note 1 | 2 | |
| V- Output Voltage (absolute) | V- | -7 | 0.3 | V | Note 1 | 2 | |
| V+ to V- Absolute Difference | V+ + V- | 13 | V | Note 1 | 2 | ||
| Input Voltage T_IN, SHDN, EN | -0.3 | 6 | V | 2 | |||
| Receiver Input Voltage R_IN | -25 | 25 | V | 2 | |||
| Transmitter Output Voltage T_OUT | -13.2 | 13.2 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10s | 2 | |||
| Thermal Resistance Junction-to-Ambient (single layer board) | θJA | 110 | °C/W | 28-Pin SSOP (A28+1), single layer board | 16 | ||
| Thermal Resistance Junction-to-Case (single layer board) | θJC | 25 | °C/W | 28-Pin SSOP (A28+1), single layer board | 16 | ||
| Thermal Resistance Junction-to-Ambient (multi layer board) | θJA | 67.1 | °C/W | 28-Pin SSOP (A28+1), multi layer board | 16 | ||
| Thermal Resistance Junction-to-Case (multi layer board) | θJC | 25 | °C/W | 28-Pin SSOP (A28+1), multi layer board | 16 |
CAD (KiCad official)
- Symbol:
MAX3241EAI+T - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
max3241eai-t-etched.step/max3241eai-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3241eai-t.step/max3241eai-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256
6179886183cdd63b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3241EAI+T
**Analog Devices Inc Maxim Integrated** · RS232 ICs · SSOP-28-208mil
MAX3241EAI+T from Analog Devices Inc Maxim Integrated, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor (C2); capacitor values must not go below the Table 2 minimums for the supply in use. |
| 2 | C2- | passive | Negative terminal of the inverting charge-pump capacitor (C2); capacitor values must not go below the Table 2 minimums for the supply in use. |
| 3 | V- | power_out | Generated -5.5V supply from the inverting charge pump; V+ and V- may each have a maximum magnitude of 7V, with their absolute difference not exceeding 13V. |
| 4 | R1IN | input | RS-232 receiver input 1 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 5 | R2IN | input | RS-232 receiver input 2 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 6 | R3IN | input | RS-232 receiver input 3 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 7 | R4IN | input | RS-232 receiver input 4 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 8 | R5IN | input | RS-232 receiver input 5 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ. |
| 9 | T1OUT | output | RS-232 transmitter 1 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V. |
| 10 | T2OUT | output | RS-232 transmitter 2 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V. |
| 11 | T3OUT | output | RS-232 transmitter 3 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V. |
| 12 | T3IN | input | TTL/CMOS transmitter 3 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC. |
| 13 | T2IN | input | TTL/CMOS transmitter 2 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC. |
| 14 | T1IN | input | TTL/CMOS transmitter 1 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC. |
| 15 | R5OUT | output | Inverting TTL/CMOS receiver 5 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 16 | R4OUT | output | Inverting TTL/CMOS receiver 4 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 17 | R3OUT | output | Inverting TTL/CMOS receiver 3 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 18 | R2OUT | output | Inverting TTL/CMOS receiver 2 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 19 | R1OUT | output | Inverting TTL/CMOS receiver 1 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA. |
| 20 | R2OUTB | output | Noninverting complementary receiver 2 output that is always active, regardless of the state of EN or SHDN. |
| 21 | R1OUTB | output | Noninverting complementary receiver 1 output that is always active, regardless of the state of EN or SHDN. |
| 22 | SHDN | input | Active-low shutdown control that turns off the charge pumps and disables the transmitter outputs when low, with shutdown supply current of 10µA maximum; connect to VCC if shutdown is not used. |
| 23 | EN | input | Active-low receiver enable that puts the inverting R_OUT outputs into high-impedance when high, and has no effect on T_OUT or the always-active B outputs. |
| 24 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor (C1); capacitor values must not go below the Table 2 minimums for the supply in use. |
| 25 | GND | power_in | Ground reference for the device. |
| 26 | VCC | power_in | Supply voltage of +3.0V to +5.5V; absolute maximum is -0.3V to +6V. |
| 27 | V+ | power_out | Generated +5.5V supply from the doubling charge pump; V+ may have a maximum magnitude of 7V. |
| 28 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor (C1); capacitor values must not go below the Table 2 minimums for the supply in use. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Power-Supply Current | | | 0.3 | 1 | mA | No load, VCC = 3.3V or 5.0V, TA = +25°C | 2 |
| Shutdown Supply Current | | | 1 | 10 | µA | SHDN = GND, TA = +25°C | 2 |
| Input Logic Threshold Low | | | | 0.8 | V | (Note 3) T_IN, EN, SHDN, MBAUD | 2 |
| Input Logic Threshold High | | 2 | | | V | VCC = 3.3V | 2 |
| Input Logic Threshold High | | 2.4 | | | V | VCC = 5.0V | 2 |
| Input Leakage Current | | -1 | 0.01 | 1 | µA | T_IN, EN, SHDN, MBAUD | 2 |
| Output Leakage Current | | -10 | 0.05 | 10 | µA | Receivers disabled | 2 |
| Output Voltage Low | | | | 0.4 | V | IOUT = 1.6mA | 2 |
| Input Voltage Range | | -25 | | 25 | V | | 2 |
| Input Resistance | | 3 | 5 | 7 | kΩ | TA = +25°C | 3 |
| Transmitter Output Voltage Swing | | -5 | 5.4 | | V | All transmitter outputs loaded with 3kΩ to ground | 3 |
| Output Resistance | | 300 | | | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 |
| Output Short-Circuit Current | | -35 | 60 | | mA | | 3 |
| Mouse Driveability Transmitter Output Voltage | | -5 | | 5 | V | T1IN = T2IN = GND, T3IN = VCC, T3OUT loaded with 3kΩ to GND, T1OUT and T2OUT loaded with 2.5mA each | 3 |
| Maximum Data Rate | | 120 | 235 | | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching | 3 |
| Receiver Output Enable Time | | | | 200 | ns | Normal operation | 3 |
| Receiver Output Disable Time | | | | 200 | ns | Normal operation | 3 |
| Transmitter Skew | / tPHL - tPLH / | | | 300 | ns | | 3 |
| Receiver Skew | / tPHL - tPLH / | | | 300 | ns | | 3 |
| Transition-Region Slew Rate | | 6 | | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF | 3 |
| Transition-Region Slew Rate | | 4 | | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF | 3 |
| VCC Supply Voltage | VCC | 3 | | 5.5 | V | Supply voltage | 2 |
| Operating Temperature Range (MAX32__E__) | | -40 | | 85 | °C | E-grade (MAX32_ _E_ _) | 2 |
| Required Minimum Capacitor C1 | C1 | 0.1 | | | µF | VCC = 3.0 to 3.6V | 9 |
| Required Minimum Capacitor C2, C3, C4 | C2, C3, C4 | 0.1 | | | µF | VCC = 3.0 to 3.6V | 9 |
| Required Minimum Capacitor C1 | C1 | 0.047 | | | µF | VCC = 4.5 to 5.5V | 9 |
| Required Minimum Capacitor C2, C3, C4 | C2, C3, C4 | 0.33 | | | µF | VCC = 4.5 to 5.5V | 9 |
| Required Minimum Capacitor C2, C3, C4 | C2, C3, C4 | 0.47 | | | µF | VCC = 3.0 to 5.5V | 9 |
| VCC Supply Voltage (absolute) | VCC | -0.3 | | 6 | V | | 2 |
| V+ Output Voltage (absolute) | V+ | -0.3 | | 7 | V | Note 1 | 2 |
| V- Output Voltage (absolute) | V- | -7 | | 0.3 | V | Note 1 | 2 |
| V+ to V- Absolute Difference | V+ + V- | | | 13 | V | Note 1 | 2 |
| Input Voltage T_IN, SHDN, EN | | -0.3 | | 6 | V | | 2 |
| Receiver Input Voltage R_IN | | -25 | | 25 | V | | 2 |
| Transmitter Output Voltage T_OUT | | -13.2 | | 13.2 | V | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10s | 2 |
| Thermal Resistance Junction-to-Ambient (single layer board) | θJA | | 110 | | °C/W | 28-Pin SSOP (A28+1), single layer board | 16 |
| Thermal Resistance Junction-to-Case (single layer board) | θJC | | 25 | | °C/W | 28-Pin SSOP (A28+1), single layer board | 16 |
| Thermal Resistance Junction-to-Ambient (multi layer board) | θJA | | 67.1 | | °C/W | 28-Pin SSOP (A28+1), multi layer board | 16 |
| Thermal Resistance Junction-to-Case (multi layer board) | θJC | | 25 | | °C/W | 28-Pin SSOP (A28+1), multi layer board | 16 |
## CAD (KiCad official)
- Symbol: `MAX3241EAI+T`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `max3241eai-t-etched.step` / `max3241eai-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3241eai-t.step` / `max3241eai-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922881178259456) (17 pp, sha256 `6179886183cdd63b`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3241eai-t-datasheet.pdf)