main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max3241eai-t: viewers · Ray
max3241eai-t-etched.glb Publish 0.1.0 · Ray
max3241eai-t-etched.step max3241eai-t: factory component page (tier=lcsc) · Ray
max3241eai-t-hero.glb max3241eai-t: hero GLB from the etched model (keeps the MPN mark) · Ray
max3241eai-t-hero.overlay.json Publish 0.1.0 · Ray
max3241eai-t.glb Publish 0.1.0 · Ray
max3241eai-t.kicad_mod Publish 0.1.0 · Ray
max3241eai-t.kicad_sym Publish 0.1.0 · Ray
max3241eai-t.lbr Publish 0.1.0 · Ray
max3241eai-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MAX3241EAI+T

Analog Devices Inc Maxim Integrated · RS232 ICs · SSOP-28-208mil

MAX3241EAI+T from Analog Devices Inc Maxim Integrated, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ passive Positive terminal of the inverting charge-pump capacitor (C2); capacitor values must not go below the Table 2 minimums for the supply in use.
2 C2- passive Negative terminal of the inverting charge-pump capacitor (C2); capacitor values must not go below the Table 2 minimums for the supply in use.
3 V- power_out Generated -5.5V supply from the inverting charge pump; V+ and V- may each have a maximum magnitude of 7V, with their absolute difference not exceeding 13V.
4 R1IN input RS-232 receiver input 1 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ.
5 R2IN input RS-232 receiver input 2 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ.
6 R3IN input RS-232 receiver input 3 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ.
7 R4IN input RS-232 receiver input 4 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ.
8 R5IN input RS-232 receiver input 5 with an input voltage range of ±25V and typical input resistance of 3 to 7 kΩ.
9 T1OUT output RS-232 transmitter 1 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V.
10 T2OUT output RS-232 transmitter 2 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V.
11 T3OUT output RS-232 transmitter 3 output, swinging at least ±5.0V into a 3kΩ load to ground, with absolute output voltage limit of ±13.2V.
12 T3IN input TTL/CMOS transmitter 3 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC.
13 T2IN input TTL/CMOS transmitter 2 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC.
14 T1IN input TTL/CMOS transmitter 1 input with logic threshold low of 0.8V maximum and threshold high of 2.0V (3.3V) or 2.4V (5.0V); it has no pullup, so unused inputs must be tied to GND or VCC.
15 R5OUT output Inverting TTL/CMOS receiver 5 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA.
16 R4OUT output Inverting TTL/CMOS receiver 4 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA.
17 R3OUT output Inverting TTL/CMOS receiver 3 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA.
18 R2OUT output Inverting TTL/CMOS receiver 2 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA.
19 R1OUT output Inverting TTL/CMOS receiver 1 output that goes high-impedance when EN is high, with VOL of 0.4V maximum at 1.6mA.
20 R2OUTB output Noninverting complementary receiver 2 output that is always active, regardless of the state of EN or SHDN.
21 R1OUTB output Noninverting complementary receiver 1 output that is always active, regardless of the state of EN or SHDN.
22 SHDN input Active-low shutdown control that turns off the charge pumps and disables the transmitter outputs when low, with shutdown supply current of 10µA maximum; connect to VCC if shutdown is not used.
23 EN input Active-low receiver enable that puts the inverting R_OUT outputs into high-impedance when high, and has no effect on T_OUT or the always-active B outputs.
24 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor (C1); capacitor values must not go below the Table 2 minimums for the supply in use.
25 GND power_in Ground reference for the device.
26 VCC power_in Supply voltage of +3.0V to +5.5V; absolute maximum is -0.3V to +6V.
27 V+ power_out Generated +5.5V supply from the doubling charge pump; V+ may have a maximum magnitude of 7V.
28 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor (C1); capacitor values must not go below the Table 2 minimums for the supply in use.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SSOP-28-208mil
Category Interface
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Power-Supply Current 0.3 1 mA No load, VCC = 3.3V or 5.0V, TA = +25°C 2
Shutdown Supply Current 1 10 µA SHDN = GND, TA = +25°C 2
Input Logic Threshold Low 0.8 V (Note 3) T_IN, EN, SHDN, MBAUD 2
Input Logic Threshold High 2 V VCC = 3.3V 2
Input Logic Threshold High 2.4 V VCC = 5.0V 2
Input Leakage Current -1 0.01 1 µA T_IN, EN, SHDN, MBAUD 2
Output Leakage Current -10 0.05 10 µA Receivers disabled 2
Output Voltage Low 0.4 V IOUT = 1.6mA 2
Input Voltage Range -25 25 V 2
Input Resistance 3 5 7 kΩ TA = +25°C 3
Transmitter Output Voltage Swing -5 5.4 V All transmitter outputs loaded with 3kΩ to ground 3
Output Resistance 300 Ω VCC = V+ = V- = 0V, VOUT = ±2V 3
Output Short-Circuit Current -35 60 mA 3
Mouse Driveability Transmitter Output Voltage -5 5 V T1IN = T2IN = GND, T3IN = VCC, T3OUT loaded with 3kΩ to GND, T1OUT and T2OUT loaded with 2.5mA each 3
Maximum Data Rate 120 235 kbps RL = 3kΩ, CL = 1000pF, one transmitter switching 3
Receiver Output Enable Time 200 ns Normal operation 3
Receiver Output Disable Time 200 ns Normal operation 3
Transmitter Skew / tPHL - tPLH / 300 ns 3
Receiver Skew / tPHL - tPLH / 300 ns 3
Transition-Region Slew Rate 6 30 V/µs VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF 3
Transition-Region Slew Rate 4 30 V/µs VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF 3
VCC Supply Voltage VCC 3 5.5 V Supply voltage 2
Operating Temperature Range (MAX32__E__) -40 85 °C E-grade (MAX32_ E _) 2
Required Minimum Capacitor C1 C1 0.1 µF VCC = 3.0 to 3.6V 9
Required Minimum Capacitor C2, C3, C4 C2, C3, C4 0.1 µF VCC = 3.0 to 3.6V 9
Required Minimum Capacitor C1 C1 0.047 µF VCC = 4.5 to 5.5V 9
Required Minimum Capacitor C2, C3, C4 C2, C3, C4 0.33 µF VCC = 4.5 to 5.5V 9
Required Minimum Capacitor C2, C3, C4 C2, C3, C4 0.47 µF VCC = 3.0 to 5.5V 9
VCC Supply Voltage (absolute) VCC -0.3 6 V 2
V+ Output Voltage (absolute) V+ -0.3 7 V Note 1 2
V- Output Voltage (absolute) V- -7 0.3 V Note 1 2
V+ to V- Absolute Difference V+ + V- 13 V Note 1 2
Input Voltage T_IN, SHDN, EN -0.3 6 V 2
Receiver Input Voltage R_IN -25 25 V 2
Transmitter Output Voltage T_OUT -13.2 13.2 V 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C Soldering, 10s 2
Thermal Resistance Junction-to-Ambient (single layer board) θJA 110 °C/W 28-Pin SSOP (A28+1), single layer board 16
Thermal Resistance Junction-to-Case (single layer board) θJC 25 °C/W 28-Pin SSOP (A28+1), single layer board 16
Thermal Resistance Junction-to-Ambient (multi layer board) θJA 67.1 °C/W 28-Pin SSOP (A28+1), multi layer board 16
Thermal Resistance Junction-to-Case (multi layer board) θJC 25 °C/W 28-Pin SSOP (A28+1), multi layer board 16

CAD (KiCad official)

  • Symbol: MAX3241EAI+T
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: max3241eai-t-etched.step / max3241eai-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3241eai-t.step / max3241eai-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256 6179886183cdd63b, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF