main
History Download
Ray Publish 0.1.0 eba9399

MAX3232ECPE+

Analog Devices Inc./Maxim Integrated · RS232 ICs · PDIP-16

MAX3232ECPE+ from Analog Devices Inc./Maxim Integrated, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor.
2 V+ power_out +5.5V generated by the charge pump, decoupled with a reservoir capacitor.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor.
5 C2- passive Negative terminal of the inverting charge-pump capacitor.
6 V- power_out -5.5V generated by the charge pump, decoupled with a reservoir capacitor.
7 T2OUT output RS-232 transmitter 2 output, with ±5.0V minimum swing into 3kΩ loads.
8 R2IN input RS-232 receiver 2 input, with ±25V input voltage range and 5kΩ typical input resistance.
9 R2OUT output TTL/CMOS receiver 2 output.
10 T2IN input TTL/CMOS transmitter 2 input with no pullup resistor; connect unused inputs to GND or VCC.
11 T1IN input TTL/CMOS transmitter 1 input with no pullup resistor; connect unused inputs to GND or VCC.
12 R1OUT output TTL/CMOS receiver 1 output.
13 R1IN input RS-232 receiver 1 input, with ±25V input voltage range and 5kΩ typical input resistance.
14 T1OUT output RS-232 transmitter 1 output, with ±5.0V minimum swing into 3kΩ loads.
15 GND power_in Ground.
16 VCC power_in +3.0V to +5.5V supply voltage.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package PDIP-16
Category Communication Interface Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC supply voltage (operating) VCC 3 5.5 V C1-C4 = 0.1μF tested at 3.3V ±10% 2
Supply Voltage VCC -0.3 6 V 2
V+ voltage V+ -0.3 7 V Note 1 2
V- voltage V- -7 0.3 V Note 1 2
V+ + V- V+ + V- 13 V Note 1 2
Input Voltage T_IN T_IN -0.3 6 V 2
Input Voltage R_IN R_IN -25 25 V 2
Output Voltage T_OUT T_OUT -13.2 13.2 V 2
Output Voltage R_OUT R_OUT -0.3 V upper limit VCC + 0.3V 2
Operating Temperature Range (C grade) 0 70 °C MAX32__C__ 2
Operating Temperature Range (E grade) -40 85 °C MAX32__E__ 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C soldering, 10s 2
VCC Power-Supply Current 0.3 1 mA No load, VCC = 3.3V or 5.0V, TA = +25°C 2
Input Logic Threshold Low 0.8 V T_IN 2
Input Logic Threshold High 2 V VCC = 3.3V 2
Input Logic Threshold High 2.4 V VCC = 5.0V 2
Input Leakage Current -1 0.01 1 µA T_IN 2
Output Voltage Low 0.4 V IOUT = 1.6mA 2
Receiver Input Voltage Range -25 25 V 2
Receiver Input Threshold Low 0.6 1.2 V TA = +25°C, VCC = 3.3V 2
Receiver Input Threshold Low 0.8 1.5 V TA = +25°C, VCC = 5.0V 2
Receiver Input Threshold High 1.5 2.4 V TA = +25°C, VCC = 3.3V 2
Receiver Input Threshold High 1.8 2.4 V TA = +25°C, VCC = 5.0V 2
Input Hysteresis 0.3 V 3
Input Resistance 3 5 7 kΩ TA = +25°C 3
Transmitter Output Voltage Swing 5 5.4 V All transmitter outputs loaded with 3kΩ to ground, printed ± 3
Transmitter Output Resistance 300 Ω VCC = V+ = V- = 0V, VOUT = ±2V 3
Output Short-Circuit Current 35 60 mA printed ±35 ±60 3
Transmitter Output Leakage Current -25 25 µA VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled 3
Maximum Data Rate 120 235 kbps RL = 3kΩ, CL = 1000pF, one transmitter switching 3
Receiver Propagation Delay tPHL tPHL 0.3 μs R_IN to R_OUT, CL = 150pF 3
Receiver Propagation Delay tPLH tPLH 0.3 μs R_IN to R_OUT, CL = 150pF 3
Transmitter Skew / tPHL - tPLH / 300 ns 3
Receiver Skew / tPHL - tPLH / 300 ns 3
Transition-Region Slew Rate 6 30 V/μs VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF 3
Transition-Region Slew Rate 4 30 V/μs VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF 3
Thermal Resistance Junction-Ambient (single layer) θJA 95 °C/W 16 Plastic DIP P16+1, single layer board 16
Thermal Resistance Junction-Case (single layer) θJC 35 °C/W 16 Plastic DIP P16+1, single layer board 16

CAD (KiCad official)

  • Symbol: MAX3232ECPE+
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: PDIP-16 (KiCad packages3D, STEP)
  • 3D model files: max3232ecpe-etched.step / max3232ecpe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232ecpe.step / max3232ecpe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256 6179886183cdd63b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF