3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3232ECPE+
Analog Devices Inc./Maxim Integrated · RS232 ICs · PDIP-16
MAX3232ECPE+ from Analog Devices Inc./Maxim Integrated, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor. |
| 2 | V+ | power_out | +5.5V generated by the charge pump, decoupled with a reservoir capacitor. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor. |
| 6 | V- | power_out | -5.5V generated by the charge pump, decoupled with a reservoir capacitor. |
| 7 | T2OUT | output | RS-232 transmitter 2 output, with ±5.0V minimum swing into 3kΩ loads. |
| 8 | R2IN | input | RS-232 receiver 2 input, with ±25V input voltage range and 5kΩ typical input resistance. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output. |
| 10 | T2IN | input | TTL/CMOS transmitter 2 input with no pullup resistor; connect unused inputs to GND or VCC. |
| 11 | T1IN | input | TTL/CMOS transmitter 1 input with no pullup resistor; connect unused inputs to GND or VCC. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output. |
| 13 | R1IN | input | RS-232 receiver 1 input, with ±25V input voltage range and 5kΩ typical input resistance. |
| 14 | T1OUT | output | RS-232 transmitter 1 output, with ±5.0V minimum swing into 3kΩ loads. |
| 15 | GND | power_in | Ground. |
| 16 | VCC | power_in | +3.0V to +5.5V supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | PDIP-16 |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage (operating) | VCC | 3 | 5.5 | V | C1-C4 = 0.1μF tested at 3.3V ±10% | 2 | |
| Supply Voltage | VCC | -0.3 | 6 | V | 2 | ||
| V+ voltage | V+ | -0.3 | 7 | V | Note 1 | 2 | |
| V- voltage | V- | -7 | 0.3 | V | Note 1 | 2 | |
| V+ + V- | V+ + V- | 13 | V | Note 1 | 2 | ||
| Input Voltage T_IN | T_IN | -0.3 | 6 | V | 2 | ||
| Input Voltage R_IN | R_IN | -25 | 25 | V | 2 | ||
| Output Voltage T_OUT | T_OUT | -13.2 | 13.2 | V | 2 | ||
| Output Voltage R_OUT | R_OUT | -0.3 | V | upper limit VCC + 0.3V | 2 | ||
| Operating Temperature Range (C grade) | 0 | 70 | °C | MAX32__C__ | 2 | ||
| Operating Temperature Range (E grade) | -40 | 85 | °C | MAX32__E__ | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10s | 2 | |||
| VCC Power-Supply Current | 0.3 | 1 | mA | No load, VCC = 3.3V or 5.0V, TA = +25°C | 2 | ||
| Input Logic Threshold Low | 0.8 | V | T_IN | 2 | |||
| Input Logic Threshold High | 2 | V | VCC = 3.3V | 2 | |||
| Input Logic Threshold High | 2.4 | V | VCC = 5.0V | 2 | |||
| Input Leakage Current | -1 | 0.01 | 1 | µA | T_IN | 2 | |
| Output Voltage Low | 0.4 | V | IOUT = 1.6mA | 2 | |||
| Receiver Input Voltage Range | -25 | 25 | V | 2 | |||
| Receiver Input Threshold Low | 0.6 | 1.2 | V | TA = +25°C, VCC = 3.3V | 2 | ||
| Receiver Input Threshold Low | 0.8 | 1.5 | V | TA = +25°C, VCC = 5.0V | 2 | ||
| Receiver Input Threshold High | 1.5 | 2.4 | V | TA = +25°C, VCC = 3.3V | 2 | ||
| Receiver Input Threshold High | 1.8 | 2.4 | V | TA = +25°C, VCC = 5.0V | 2 | ||
| Input Hysteresis | 0.3 | V | 3 | ||||
| Input Resistance | 3 | 5 | 7 | kΩ | TA = +25°C | 3 | |
| Transmitter Output Voltage Swing | 5 | 5.4 | V | All transmitter outputs loaded with 3kΩ to ground, printed ± | 3 | ||
| Transmitter Output Resistance | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | |||
| Output Short-Circuit Current | 35 | 60 | mA | printed ±35 ±60 | 3 | ||
| Transmitter Output Leakage Current | -25 | 25 | µA | VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled | 3 | ||
| Maximum Data Rate | 120 | 235 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching | 3 | ||
| Receiver Propagation Delay tPHL | tPHL | 0.3 | μs | R_IN to R_OUT, CL = 150pF | 3 | ||
| Receiver Propagation Delay tPLH | tPLH | 0.3 | μs | R_IN to R_OUT, CL = 150pF | 3 | ||
| Transmitter Skew | / tPHL - tPLH / | 300 | ns | 3 | |||
| Receiver Skew | / tPHL - tPLH / | 300 | ns | 3 | |||
| Transition-Region Slew Rate | 6 | 30 | V/μs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF | 3 | ||
| Transition-Region Slew Rate | 4 | 30 | V/μs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF | 3 | ||
| Thermal Resistance Junction-Ambient (single layer) | θJA | 95 | °C/W | 16 Plastic DIP P16+1, single layer board | 16 | ||
| Thermal Resistance Junction-Case (single layer) | θJC | 35 | °C/W | 16 Plastic DIP P16+1, single layer board | 16 |
CAD (KiCad official)
- Symbol:
MAX3232ECPE+ - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
max3232ecpe-etched.step/max3232ecpe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232ecpe.step/max3232ecpe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256
6179886183cdd63b, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).