main
Ray Publish 0.1.0 513b80c

MAX3232CSE+T-JSM

JSMSEMI · RS232 ICs · SOP-16

MAX3232CSE+T-JSM from JSMSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor C1, connected between C1+ and C1-.
2 V+ power_out Positive output supply of +5.5V generated by the charge pump; absolute maximum V+ is -0.3V to +7.0V.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor C1, connected between C1+ and C1-.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor C2, connected between C2+ and C2-.
5 C2- passive Negative terminal of the inverting charge-pump capacitor C2, connected between C2+ and C2-.
6 V- power_out Negative output supply of -5.5V generated by the charge pump; absolute maximum V- is +0.3V to -7.0V.
7 DOUT2 output RS-232 driver output 2; driver output voltage is specified at ±5.0V minimum into a 3kΩ load to GND.
8 RIN2 input RS-232 receiver input 2; receiver input voltage range is -25V to +25V.
9 ROUT2 output TTL/CMOS receiver output 2; output high is VCC-0.6V minimum at 1.0mA and output low is 0.4V maximum at 1.6mA.
10 DIN2 input TTL/CMOS driver input 2; VIL is 0.8V maximum and the input accepts up to 5.5V.
11 DIN1 input TTL/CMOS driver input 1; VIL is 0.8V maximum and the input accepts up to 5.5V.
12 ROUT1 output TTL/CMOS receiver output 1; output high is VCC-0.6V minimum at 1.0mA and output low is 0.4V maximum at 1.6mA.
13 RIN1 input RS-232 receiver input 1; receiver input voltage range is -25V to +25V.
14 DOUT1 output RS-232 driver output 1; driver output voltage is specified at ±5.0V minimum into a 3kΩ load to GND.
15 GND power_in Ground reference for the device; all voltages are referenced to network GND.
16 VCC power_in Supply voltage input of +3.0V to +5.5V (3.3V or 5.0V operation per the recommended conditions).

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 3.3 3.6 V VCC=3.3V 3
Supply Voltage VCC 4.5 5 5.5 V VCC=5.0V 3
Driver and Control High-level Input Voltage VIH 2 V DIN, VCC=3.3V 3
Driver and Control High-level Input Voltage VIH 2.4 V DIN, VCC=5.5V 3
Driver and Control Low-level Input Voltage VIL 0.8 V DIN 3
Driver and Control Input Voltage VIN 5.5 V DIN 3
Receiver Input Voltage VRIN -25 25 V 3
Operating Free-Air Temperature TA 0 70 °C 3
Supply Voltage Range VCC -0.3 6 V Over operating free-air temperature range 3
Positive Output Supply Voltage Range V+ -0.3 7 V Over operating free-air temperature range; Note 2 3
Negative Output Supply Voltage Range V- -7 0.3 V Over operating free-air temperature range; Note 2 3
Supply Voltage Difference V+ - V- 13 V Over operating free-air temperature range; Note 2 3
Driver Input Voltage VIN -0.3 6 V Drivers; Over operating free-air temperature range 3
Receiver Input Voltage VIN -25 25 V Receivers; Over operating free-air temperature range 3
Driver Output Voltage VOUT -13.2 13.2 V Drivers; Over operating free-air temperature range 3
Receiver Output Voltage VOUT -0.3 V Receivers; Over operating free-air temperature range 3
Operating Virtual Junction Temperature TJ 150 °C Over operating free-air temperature range 3
Storage Temperature TSTG -65 150 °C 3
Supply Current ICC 0.3 1 mA No load 4
High-Level Output Voltage (Driver) VOH 5 5.4 V DOUT at RL=3kΩ to GND, DIN=GND 4
Low-Level Output Voltage (Driver) VOL -5.4 -5 V DOUT at RL=3kΩ to GND, DIN=VCC 4
High-Level Input Current IOH -1 0.01 1 μA VI=VCC 4
Low-Level Input Current IOL -1 0.01 1 μA VI at GND 4
Short-Circuit Output Current IOS -60 35 60 mA VCC=3.6V, VOUT=0V 4
Output Resistance rO 300 Ω VCC, V+ and V- =0V, VOUT=±2.0V 4
Output Resistance rO 10 MΩ VCC, V+ and V- =0V, VOUT=±2.0V 4
Low-Level Output Voltage (Receiver) VOL 0.4 V IOL=1.6mA 4
Positive-Going Input Threshold Voltage VIT+ 1.5 2.4 V VCC=3.3V 4
Positive-Going Input Threshold Voltage VIT+ 1.8 2.4 V VCC=5.0V 4
Negative-Going Input Threshold Voltage VIT- 0.6 1.2 V VCC=3.3V 4
Negative-Going Input Threshold Voltage VIT- 0.8 1.5 V VCC=5.0V 4
Input Resistance RI 3 5 7 kΩ VI=±3.0V~±25V 4
Maximum Data Rate 120 250 Kbit/s CL=1000pF, RL=3kΩ, One Driver Switching 4
Pulse Skew (Driver) tSK(p) 300 ns CL=220pF2500pF, RL=3kΩ7kΩ 4
Slew Rate, Transition Region SR(tr) 5 35 V/μs VCC=3.3V, RL=3kΩ7kΩ, CL=220pF1000pF 4
Slew Rate, Transition Region SR(tr) 3 35 V/μs VCC=3.3V, RL=3kΩ7kΩ, CL=220pF2500pF 4
Propagation Delay Time, Low-to High-Level Output tPLH 300 ns CL=150pF 4
Propagation Delay Time, High-to Low-Level Output tPHL 300 ns CL=150pF 4
Output Enable Time tEN 200 ns CL=150pF, RL=3kΩ 4
Output Disable Time tDIS 200 ns CL=150pF, RL=3kΩ 4
Pulse Skew (Receiver) tSK(P) 300 ns /tPLH−tPHL/ 4
Thermal Resistance, Junction to Ambient θJA 105 °C/W SOP-16 3

CAD (KiCad official)

  • Symbol: MAX3232CSE+T-JSM
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: max3232cse-t-jsm-etched.step / max3232cse-t-jsm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232cse-t-jsm.step / max3232cse-t-jsm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (6 pp, sha256 32d8bb82c7d8c23e, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF