3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3232CSE+T-JSM
JSMSEMI · RS232 ICs · SOP-16
MAX3232CSE+T-JSM from JSMSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor C1, connected between C1+ and C1-. |
| 2 | V+ | power_out | Positive output supply of +5.5V generated by the charge pump; absolute maximum V+ is -0.3V to +7.0V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor C1, connected between C1+ and C1-. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor C2, connected between C2+ and C2-. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor C2, connected between C2+ and C2-. |
| 6 | V- | power_out | Negative output supply of -5.5V generated by the charge pump; absolute maximum V- is +0.3V to -7.0V. |
| 7 | DOUT2 | output | RS-232 driver output 2; driver output voltage is specified at ±5.0V minimum into a 3kΩ load to GND. |
| 8 | RIN2 | input | RS-232 receiver input 2; receiver input voltage range is -25V to +25V. |
| 9 | ROUT2 | output | TTL/CMOS receiver output 2; output high is VCC-0.6V minimum at 1.0mA and output low is 0.4V maximum at 1.6mA. |
| 10 | DIN2 | input | TTL/CMOS driver input 2; VIL is 0.8V maximum and the input accepts up to 5.5V. |
| 11 | DIN1 | input | TTL/CMOS driver input 1; VIL is 0.8V maximum and the input accepts up to 5.5V. |
| 12 | ROUT1 | output | TTL/CMOS receiver output 1; output high is VCC-0.6V minimum at 1.0mA and output low is 0.4V maximum at 1.6mA. |
| 13 | RIN1 | input | RS-232 receiver input 1; receiver input voltage range is -25V to +25V. |
| 14 | DOUT1 | output | RS-232 driver output 1; driver output voltage is specified at ±5.0V minimum into a 3kΩ load to GND. |
| 15 | GND | power_in | Ground reference for the device; all voltages are referenced to network GND. |
| 16 | VCC | power_in | Supply voltage input of +3.0V to +5.5V (3.3V or 5.0V operation per the recommended conditions). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V | VCC=3.3V | 3 |
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | VCC=5.0V | 3 |
| Driver and Control High-level Input Voltage | VIH | 2 | V | DIN, VCC=3.3V | 3 | ||
| Driver and Control High-level Input Voltage | VIH | 2.4 | V | DIN, VCC=5.5V | 3 | ||
| Driver and Control Low-level Input Voltage | VIL | 0.8 | V | DIN | 3 | ||
| Driver and Control Input Voltage | VIN | 5.5 | V | DIN | 3 | ||
| Receiver Input Voltage | VRIN | -25 | 25 | V | 3 | ||
| Operating Free-Air Temperature | TA | 0 | 70 | °C | 3 | ||
| Supply Voltage Range | VCC | -0.3 | 6 | V | Over operating free-air temperature range | 3 | |
| Positive Output Supply Voltage Range | V+ | -0.3 | 7 | V | Over operating free-air temperature range; Note 2 | 3 | |
| Negative Output Supply Voltage Range | V- | -7 | 0.3 | V | Over operating free-air temperature range; Note 2 | 3 | |
| Supply Voltage Difference | V+ - V- | 13 | V | Over operating free-air temperature range; Note 2 | 3 | ||
| Driver Input Voltage | VIN | -0.3 | 6 | V | Drivers; Over operating free-air temperature range | 3 | |
| Receiver Input Voltage | VIN | -25 | 25 | V | Receivers; Over operating free-air temperature range | 3 | |
| Driver Output Voltage | VOUT | -13.2 | 13.2 | V | Drivers; Over operating free-air temperature range | 3 | |
| Receiver Output Voltage | VOUT | -0.3 | V | Receivers; Over operating free-air temperature range | 3 | ||
| Operating Virtual Junction Temperature | TJ | 150 | °C | Over operating free-air temperature range | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Supply Current | ICC | 0.3 | 1 | mA | No load | 4 | |
| High-Level Output Voltage (Driver) | VOH | 5 | 5.4 | V | DOUT at RL=3kΩ to GND, DIN=GND | 4 | |
| Low-Level Output Voltage (Driver) | VOL | -5.4 | -5 | V | DOUT at RL=3kΩ to GND, DIN=VCC | 4 | |
| High-Level Input Current | IOH | -1 | 0.01 | 1 | μA | VI=VCC | 4 |
| Low-Level Input Current | IOL | -1 | 0.01 | 1 | μA | VI at GND | 4 |
| Short-Circuit Output Current | IOS | -60 | 35 | 60 | mA | VCC=3.6V, VOUT=0V | 4 |
| Output Resistance | rO | 300 | Ω | VCC, V+ and V- =0V, VOUT=±2.0V | 4 | ||
| Output Resistance | rO | 10 | MΩ | VCC, V+ and V- =0V, VOUT=±2.0V | 4 | ||
| Low-Level Output Voltage (Receiver) | VOL | 0.4 | V | IOL=1.6mA | 4 | ||
| Positive-Going Input Threshold Voltage | VIT+ | 1.5 | 2.4 | V | VCC=3.3V | 4 | |
| Positive-Going Input Threshold Voltage | VIT+ | 1.8 | 2.4 | V | VCC=5.0V | 4 | |
| Negative-Going Input Threshold Voltage | VIT- | 0.6 | 1.2 | V | VCC=3.3V | 4 | |
| Negative-Going Input Threshold Voltage | VIT- | 0.8 | 1.5 | V | VCC=5.0V | 4 | |
| Input Resistance | RI | 3 | 5 | 7 | kΩ | VI=±3.0V~±25V | 4 |
| Maximum Data Rate | 120 | 250 | Kbit/s | CL=1000pF, RL=3kΩ, One Driver Switching | 4 | ||
| Pulse Skew (Driver) | tSK(p) | 300 | ns | CL=220pF |
4 | ||
| Slew Rate, Transition Region | SR(tr) | 5 | 35 | V/μs | VCC=3.3V, RL=3kΩ |
4 | |
| Slew Rate, Transition Region | SR(tr) | 3 | 35 | V/μs | VCC=3.3V, RL=3kΩ |
4 | |
| Propagation Delay Time, Low-to High-Level Output | tPLH | 300 | ns | CL=150pF | 4 | ||
| Propagation Delay Time, High-to Low-Level Output | tPHL | 300 | ns | CL=150pF | 4 | ||
| Output Enable Time | tEN | 200 | ns | CL=150pF, RL=3kΩ | 4 | ||
| Output Disable Time | tDIS | 200 | ns | CL=150pF, RL=3kΩ | 4 | ||
| Pulse Skew (Receiver) | tSK(P) | 300 | ns | /tPLH−tPHL/ | 4 | ||
| Thermal Resistance, Junction to Ambient | θJA | 105 | °C/W | SOP-16 | 3 |
CAD (KiCad official)
- Symbol:
MAX3232CSE+T-JSM - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
max3232cse-t-jsm-etched.step/max3232cse-t-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232cse-t-jsm.step/max3232cse-t-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (6 pp, sha256
32d8bb82c7d8c23e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).