main
Ray Publish 0.1.1 139ca9a
{
  "slug": "max3232aein",
  "version": "0.1.1",
  "type": "component",
  "description": "HGSEMI RS232 ICs, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "max3232aein",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3232aein.kicad_sym",
    "max3232aein.kicad_mod",
    "max3232aein.glb",
    "max3232aein.step",
    "max3232aein.lbr",
    "docs/hero.png",
    "docs/max3232aein-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max3232aein-hero.glb",
    "max3232aein-hero.overlay.json",
    "max3232aein-etched.glb"
  ],
  "component": {
    "mpn": "MAX3232AEIN",
    "manufacturer": "HGSEMI",
    "package": "DIP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/949909abb0dc4ec695a0870573fadcfd.pdf",
    "parts": {
      "symbol": "max3232aein.kicad_sym",
      "footprint": "max3232aein.kicad_mod",
      "model_3d": "max3232aein-hero.glb",
      "model_3d_plain": "max3232aein-etched.glb",
      "model_3d_step": "max3232aein-etched.step",
      "model_3d_step_plain": "max3232aein.step",
      "lbr": "max3232aein.lbr"
    },
    "distributor_links": {
      "lcsc": "C7432160"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T05:49:19Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the voltage-doubler charge-pump capacitor; the external capacitor value depends on VCC per Table 3 (0.1µF at 3.3V±0.3V, 0.047µF at 5V±0.5V)."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Positive voltage generated by the internal charge pump; absolute maximum 7V, and the V+ to V- difference must not exceed 13V."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal of the voltage-doubler charge-pump capacitor, connected to the C1+ capacitor per the application circuit."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the inverting charge-pump capacitor; 0.33µF at 5V±0.5V or 0.1µF at 3.3V±0.3V per Table 3."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative terminal of the inverting charge-pump capacitor, connected to the C2+ capacitor per the application circuit."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Negative voltage generated by the internal charge pump; absolute maximum -7V, and the V+ to V- difference must not exceed 13V."
      },
      {
        "number": "7",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver output, rated at -13.2V to 13.2V; the output has short-circuit protection to ground."
      },
      {
        "number": "8",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver input, rated at -25V to 25V, with an operating input voltage range of -25V to 25V."
      },
      {
        "number": "9",
        "name": "ROUT2",
        "type": "output",
        "description": "TTL/CMOS receiver output, rated from -0.3V to VCC+0.3V."
      },
      {
        "number": "10",
        "name": "DIN2",
        "type": "input",
        "description": "TTL/CMOS driver input; the driver input absolute range is -0.3V to +6V, with VIH of 2.0V (3.3V supply) or 2.4V (5V supply) and VIL up to 0.8V."
      },
      {
        "number": "11",
        "name": "DIN1",
        "type": "input",
        "description": "TTL/CMOS driver input; the driver input absolute range is -0.3V to +6V, with VIH of 2.0V (3.3V supply) or 2.4V (5V supply) and VIL up to 0.8V."
      },
      {
        "number": "12",
        "name": "ROUT1",
        "type": "output",
        "description": "TTL/CMOS receiver output, rated from -0.3V to VCC+0.3V."
      },
      {
        "number": "13",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver input, rated at -25V to 25V, with an operating input voltage range of -25V to 25V."
      },
      {
        "number": "14",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver output, rated at -13.2V to 13.2V; the output has short-circuit protection to ground."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage of +3.0V to +5.5V; absolute maximum 6V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pin table (page 3) shared by DIP-16, SOP-16, TSSOP-16, QSOP-16 and QFN-16 pa; Pin descriptions were translated from the Chinese source text. The datasheet says the output short-c; Pin types for C1+, C1-, C2+, C2- are marked passive because they are charge-pump capacitor terminals"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0437,
        "at": "2026-11-12T05:49:11"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/949909abb0dc4ec695a0870573fadcfd.pdf",
        "pages": 13,
        "sha256": "2fc99b2b792e329a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3232aein.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3232aein-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "130f55e3ccba5b412f0af5e8fe2feabcca661b622ba67d75c3020e135f7ea3d5",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DIP-16",
      "source_page": 9,
      "D": {
        "nom_mm": 19.25,
        "range_mm": [
          18.94,
          19.56
        ]
      },
      "E1": {
        "nom_mm": 6.39,
        "range_mm": [
          6.1,
          6.68
        ]
      },
      "E": {
        "nom_mm": 9.5,
        "range_mm": [
          8.1,
          10.9
        ]
      },
      "e": {
        "nom_mm": 2.54,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 3.325,
        "range_mm": [
          3.1,
          3.55
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "max3232aein.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}