Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3232AEIN

HGSEMI · RS232 ICs · DIP-16

MAX3232AEIN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor; the external capacitor value depends on VCC per Table 3 (0.1µF at 3.3V±0.3V, 0.047µF at 5V±0.5V).
2 V+ power_out Positive voltage generated by the internal charge pump; absolute maximum 7V, and the V+ to V- difference must not exceed 13V.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor, connected to the C1+ capacitor per the application circuit.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor; 0.33µF at 5V±0.5V or 0.1µF at 3.3V±0.3V per Table 3.
5 C2- passive Negative terminal of the inverting charge-pump capacitor, connected to the C2+ capacitor per the application circuit.
6 V- power_out Negative voltage generated by the internal charge pump; absolute maximum -7V, and the V+ to V- difference must not exceed 13V.
7 DOUT2 output RS-232 driver output, rated at -13.2V to 13.2V; the output has short-circuit protection to ground.
8 RIN2 input RS-232 receiver input, rated at -25V to 25V, with an operating input voltage range of -25V to 25V.
9 ROUT2 output TTL/CMOS receiver output, rated from -0.3V to VCC+0.3V.
10 DIN2 input TTL/CMOS driver input; the driver input absolute range is -0.3V to +6V, with VIH of 2.0V (3.3V supply) or 2.4V (5V supply) and VIL up to 0.8V.
11 DIN1 input TTL/CMOS driver input; the driver input absolute range is -0.3V to +6V, with VIH of 2.0V (3.3V supply) or 2.4V (5V supply) and VIL up to 0.8V.
12 ROUT1 output TTL/CMOS receiver output, rated from -0.3V to VCC+0.3V.
13 RIN1 input RS-232 receiver input, rated at -25V to 25V, with an operating input voltage range of -25V to 25V.
14 DOUT1 output RS-232 driver output, rated at -13.2V to 13.2V; the output has short-circuit protection to ground.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply voltage of +3.0V to +5.5V; absolute maximum 6V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC (VCC=3.3V) VCC 3 3.3 3.6 V VCC=3.3V 4
Supply voltage VCC (VCC=5V) VCC 4.5 5 5.5 V VCC=5V 4
Driver input high voltage DIN (VCC=3.3V) VIH 2 5.5 V VCC=3.3V 4
Driver input high voltage DIN (VCC=5V) VIH 2.4 5.5 V VCC=5V 4
Driver input low voltage DIN VIL 0 0.8 V 4
Receiver input voltage RIN VI -25 25 V 4
Operating temperature range (MAX3232AEI) -40 85 ℃ MAX3232AEI 4
Supply voltage VCC VCC 6 V 3
Charge pump positive output voltage V+ (note 2) V+ -0.3 7 V 3
Charge pump negative output voltage V- (note 1) V- -7 -0.3 V 3
Driver output voltage V+ to V- (note 2) 13 V 3
Driver input voltage -0.3 6 V 3
Receiver input voltage -25 25 V 3
Driver output voltage -13.2 13.2 V 3
Storage temperature -65 150 ℃ 3
Junction temperature 150 ℃ 3
Soldering temperature TLEAD 260 ℃ 10 s 3
Supply current ICC ICC 1 mA 空载,VCC=3.3V or 5.0V,TA=25℃ 4
Driver output high voltage VOH 5 5.4 V DOUT 负载 RL=3kΩ,DIN=GND 4
Driver output low voltage VOL -5 -5.4 V DOUT 负载 RL=3kΩ,DIN=VCC 4
Driver input high-level input current IIH 0.01 1 µA VI=VCC 4
Driver input low-level input current IIL 0.01 1 µA VI 接 GND 4
Driver short-circuit output current IOS 35 60 mA VCC=3.6V, VO=0V; VCC=5.5V, VO=0V 4
Driver output impedance (minimum) ro 300 Ω VCC, V+ and V-=0V, VO=±2V 4
Driver output impedance (maximum) ro 10 MΩ VCC, V+ and V-=0V, VO=±2V 4
Receiver output low voltage VOL 0.4 mV IOL=1.6mA 4
Positive-going input threshold voltage (VCC=3.3V) VIT+ 1.5 2.4 V VCC=3.3V 4
Positive-going input threshold voltage (VCC=5V) VIT+ 2 2.4 V VCC=5V 4
Negative-going input threshold voltage (VCC=3.3V) VIT- 0.6 1.1 V VCC=3.3V 4
Negative-going input threshold voltage (VCC=5V) VIT- 0.8 1.5 V VCC=5V 4
Input hysteresis voltage Vhys 0.4 V 4
Receiver input impedance ri 3 5 7 kΩ VI=±3V to ±25V 4
ESD RS-232 pins HBM V(ESD) -15 15 kV HBM 人体模式 4
ESD RS-232 pins MM V(ESD) -800 800 V MM 机器模式 4
ESD RS-232 pins contact discharge V(ESD) -10 10 kV 接触放电 IEC 61000-4-2 4
ESD RS-232 pins air discharge V(ESD) -15 15 kV 空气放电 IEC 61000-4-2 4
ESD other pins HBM V(ESD) -4 4 kV HBM 人体模式 4
ESD other pins MM V(ESD) -400 400 V MM 机器模式 4
Maximum data rate FMAX 250 kbps RL=3kΩ, CL=1000pF 5
Driver output skew tsk(p) 100 ns RL=3kΩ to 7kΩ, CL=150pF to 2500pF, see Fig 3 5
Driver slew rate (RL 3k to 7kΩ, VCC=3.3V) SR(tr) 6 30 V/µs RL=3k to 7kΩ, VCC=3.3V, CL=150pF to 1000pF 5
Driver slew rate (RL 3k to 7kΩ) SR(tr) 4 30 V/µs RL=3k to 7kΩ, CL=150pF to 2500pF 5
Receiver output propagation delay low-to-high tPLH 150 ns CL=150pF, see Fig 4 5
Receiver output propagation delay high-to-low tPHL 150 ns CL=150pF, see Fig 4 5
Receiver output skew tsk(p) 60 ns 5

CAD (KiCad official)

  • Symbol: MAX3232AEIN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: max3232aein-etched.step / max3232aein-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232aein.step / max3232aein.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (13 pp, sha256 2fc99b2b792e329a, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF