main
Ray
Publish 0.1.0
b857e1b
MAX3232AEIMT
HGSEMI · RS232 ICs · TSSOP-16
MAX3232AEIMT from HGSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor, with C1 specified at 0.1 µF for VCC 3.3 V ±0.3 V or 0.047 µF for VCC 5 V ±0.5 V. |
| 2 | V+ | power_out | Positive charge-pump output generated on-chip; V+ may go up to 7 V maximum, and V+ minus V- must not exceed 13 V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor, connected to C1+ through the external C1 capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor, with C2 specified at 0.1 µF for 3.3 V or 0.33 µF for 5 V operation. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor, connected to C2+ through the external C2 capacitor. |
| 6 | V- | power_out | Negative charge-pump output generated on-chip; V- may go down to -7 V minimum, and V+ minus V- must not exceed 13 V. |
| 7 | DOUT2 | output | RS-232 driver output with a limit of -13.2 V to 13.2 V and short-to-ground protection. |
| 8 | RIN2 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V. |
| 9 | ROUT2 | output | TTL/CMOS receiver output with an absolute range of -0.3 V to VCC + 0.3 V. |
| 10 | DIN2 | input | TTL/CMOS driver input with a high level of 2.0 V minimum at 3.3 V (2.4 V at 5 V), a low level of 0.8 V maximum, and an absolute maximum of +6 V. |
| 11 | DIN1 | input | TTL/CMOS driver input with a high level of 2.0 V minimum at 3.3 V (2.4 V at 5 V), a low level of 0.8 V maximum, and an absolute maximum of +6 V. |
| 12 | ROUT1 | output | TTL/CMOS receiver output with an absolute range of -0.3 V to VCC + 0.3 V. |
| 13 | RIN1 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V. |
| 14 | DOUT1 | output | RS-232 driver output with a limit of -13.2 V to 13.2 V and short-to-ground protection. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply pin for 3.0 V to 5.5 V operation, with an absolute maximum of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC=3.3V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC=5V | 4 |
| Driver input high voltage | VIH | 2 | 5.5 | V | DIN, VCC=3.3V | 4 | |
| Driver input high voltage | VIH | 2.4 | 5.5 | V | DIN, VCC=5V | 4 | |
| Driver input low voltage | VIL | 0 | 0.8 | V | DIN | 4 | |
| Receiver input voltage | VI | -25 | 25 | V | RIN | 4 | |
| Operating temperature range | TA | -40 | 85 | ℃ | MAX3232AEI | 4 | |
| Supply voltage | VCC | 6 | V | 3 | |||
| Positive charge pump output voltage | V+ | -0.3 | 7 | V | note 2 | 3 | |
| Negative charge pump output voltage | V- | -7 | -0.3 | V | note 1 | 3 | |
| Driver output voltage V+ to V- | V+ to V- | 13 | V | note 2 | 3 | ||
| Driver input voltage | VI | -0.3 | 6 | V | DIN | 3 | |
| Receiver input voltage | VI | -25 | 25 | V | RIN | 3 | |
| Driver output voltage | VO | -13.2 | 13.2 | V | DOUT | 3 | |
| Receiver output voltage | VO | -0.3 | V | ROUT, max VCC+0.3 V | 3 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| Junction temperature | TJ | 150 | ℃ | 3 | |||
| Soldering temperature, 10 s | TLEAD | 260 | ℃ | 10S | 3 | ||
| Supply current | ICC | 1 | mA | no load, VCC=3.3V or 5.0V, TA=25℃ | 4 | ||
| Driver output high voltage | VOH | 5 | 5.4 | V | DOUT load RL=3kΩ, DIN=GND | 4 | |
| Driver output low voltage | VOL | -5.4 | -5 | V | DOUT load RL=3kΩ, DIN=VCC | 4 | |
| Driver input high level input current | IIH | -1 | 1 | µA | VI=VCC | 4 | |
| Driver input low level input current | IIL | -1 | 1 | µA | VI tied to GND | 4 | |
| Driver short-circuit output current | IOS | -35 | 35 | mA | VCC=3.6V, VO=0V | 4 | |
| Driver short-circuit output current | IOS | -60 | 60 | mA | VCC=5.5V, VO=0V | 4 | |
| Driver output impedance | ro | 300 | Ω | VCC, V+ and V- =0V, VO=±2V | 4 | ||
| Driver output impedance | ro | 10 | MΩ | VCC, V+ and V- =0V, VO=±2V | 4 | ||
| Receiver output low voltage | VOL | 0.4 | mV | IOL=1.6mA | 4 | ||
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.4 | V | VCC=3.3V | 4 | |
| Positive-going input threshold voltage | VIT+ | 2 | 2.4 | V | VCC=5V | 4 | |
| Negative-going input threshold voltage | VIT- | 0.6 | 1.1 | V | VCC=3.3V | 4 | |
| Negative-going input threshold voltage | VIT- | 0.8 | 1.5 | V | VCC=5V | 4 | |
| Hysteresis voltage | Vhys | 0.4 | V | 4 | |||
| Input resistance | ri | 3 | 5 | 7 | kΩ | VI=±3V to ±25V | 4 |
| ESD HBM, RS-232 pins | V(ESD) | -15 | 15 | kV | human body model | 4 | |
| ESD MM, RS-232 pins | V(ESD) | -800 | 800 | V | machine model | 4 | |
| ESD contact discharge, RS-232 pins | V(ESD) | -10 | 10 | kV | IEC 61000-4-2 contact discharge | 4 | |
| ESD air discharge, RS-232 pins | V(ESD) | -15 | 15 | kV | IEC 61000-4-2 air discharge | 4 | |
| ESD HBM, other pins | V(ESD) | -4 | 4 | kV | human body model | 4 | |
| ESD MM, other pins | V(ESD) | -400 | 400 | V | machine model | 4 | |
| Maximum data rate | FMAX | 250 | kbps | RL=3kΩ, CL=1000pF | 5 | ||
| Driver output skew | tsk(p) | 100 | ns | RL=3kΩ to 7kΩ, CL=150pF to 2500pF | 5 | ||
| Driver slew rate | SR(tr) | 6 | 30 | V/µs | RL=3kΩ to 7kΩ, VCC=3.3V, CL=150pF to 1000pF | 5 | |
| Driver slew rate | SR(tr) | 4 | 30 | V/µs | RL=3kΩ to 7kΩ, CL=150pF to 2500pF | 5 | |
| Receiver output propagation delay low to high | tPLH | 150 | ns | CL=150pF | 5 | ||
| Receiver output propagation delay high to low | tPHL | 150 | ns | CL=150pF | 5 | ||
| Receiver output skew | tsk(p) | 60 | ns | 5 |
CAD (KiCad official)
- Symbol:
MAX3232AEIMT - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
max3232aeimt-etched.step/max3232aeimt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232aeimt.step/max3232aeimt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (13 pp, sha256
2fc99b2b792e329a, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3232AEIMT
**HGSEMI** · RS232 ICs · TSSOP-16
MAX3232AEIMT from HGSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor, with C1 specified at 0.1 µF for VCC 3.3 V ±0.3 V or 0.047 µF for VCC 5 V ±0.5 V. |
| 2 | V+ | power_out | Positive charge-pump output generated on-chip; V+ may go up to 7 V maximum, and V+ minus V- must not exceed 13 V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor, connected to C1+ through the external C1 capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor, with C2 specified at 0.1 µF for 3.3 V or 0.33 µF for 5 V operation. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor, connected to C2+ through the external C2 capacitor. |
| 6 | V- | power_out | Negative charge-pump output generated on-chip; V- may go down to -7 V minimum, and V+ minus V- must not exceed 13 V. |
| 7 | DOUT2 | output | RS-232 driver output with a limit of -13.2 V to 13.2 V and short-to-ground protection. |
| 8 | RIN2 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V. |
| 9 | ROUT2 | output | TTL/CMOS receiver output with an absolute range of -0.3 V to VCC + 0.3 V. |
| 10 | DIN2 | input | TTL/CMOS driver input with a high level of 2.0 V minimum at 3.3 V (2.4 V at 5 V), a low level of 0.8 V maximum, and an absolute maximum of +6 V. |
| 11 | DIN1 | input | TTL/CMOS driver input with a high level of 2.0 V minimum at 3.3 V (2.4 V at 5 V), a low level of 0.8 V maximum, and an absolute maximum of +6 V. |
| 12 | ROUT1 | output | TTL/CMOS receiver output with an absolute range of -0.3 V to VCC + 0.3 V. |
| 13 | RIN1 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V. |
| 14 | DOUT1 | output | RS-232 driver output with a limit of -13.2 V to 13.2 V and short-to-ground protection. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply pin for 3.0 V to 5.5 V operation, with an absolute maximum of 6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC=3.3V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC=5V | 4 |
| Driver input high voltage | VIH | 2 | | 5.5 | V | DIN, VCC=3.3V | 4 |
| Driver input high voltage | VIH | 2.4 | | 5.5 | V | DIN, VCC=5V | 4 |
| Driver input low voltage | VIL | 0 | | 0.8 | V | DIN | 4 |
| Receiver input voltage | VI | -25 | | 25 | V | RIN | 4 |
| Operating temperature range | TA | -40 | | 85 | ℃ | MAX3232AEI | 4 |
| Supply voltage | VCC | | | 6 | V | | 3 |
| Positive charge pump output voltage | V+ | -0.3 | | 7 | V | note 2 | 3 |
| Negative charge pump output voltage | V- | -7 | | -0.3 | V | note 1 | 3 |
| Driver output voltage V+ to V- | V+ to V- | | | 13 | V | note 2 | 3 |
| Driver input voltage | VI | -0.3 | | 6 | V | DIN | 3 |
| Receiver input voltage | VI | -25 | | 25 | V | RIN | 3 |
| Driver output voltage | VO | -13.2 | | 13.2 | V | DOUT | 3 |
| Receiver output voltage | VO | -0.3 | | | V | ROUT, max VCC+0.3 V | 3 |
| Storage temperature | Tstg | -65 | | 150 | ℃ | | 3 |
| Junction temperature | TJ | | | 150 | ℃ | | 3 |
| Soldering temperature, 10 s | TLEAD | | | 260 | ℃ | 10S | 3 |
| Supply current | ICC | | | 1 | mA | no load, VCC=3.3V or 5.0V, TA=25℃ | 4 |
| Driver output high voltage | VOH | 5 | | 5.4 | V | DOUT load RL=3kΩ, DIN=GND | 4 |
| Driver output low voltage | VOL | -5.4 | | -5 | V | DOUT load RL=3kΩ, DIN=VCC | 4 |
| Driver input high level input current | IIH | -1 | | 1 | µA | VI=VCC | 4 |
| Driver input low level input current | IIL | -1 | | 1 | µA | VI tied to GND | 4 |
| Driver short-circuit output current | IOS | -35 | | 35 | mA | VCC=3.6V, VO=0V | 4 |
| Driver short-circuit output current | IOS | -60 | | 60 | mA | VCC=5.5V, VO=0V | 4 |
| Driver output impedance | ro | 300 | | | Ω | VCC, V+ and V- =0V, VO=±2V | 4 |
| Driver output impedance | ro | | | 10 | MΩ | VCC, V+ and V- =0V, VO=±2V | 4 |
| Receiver output low voltage | VOL | | | 0.4 | mV | IOL=1.6mA | 4 |
| Positive-going input threshold voltage | VIT+ | 1.5 | | 2.4 | V | VCC=3.3V | 4 |
| Positive-going input threshold voltage | VIT+ | 2 | | 2.4 | V | VCC=5V | 4 |
| Negative-going input threshold voltage | VIT- | 0.6 | | 1.1 | V | VCC=3.3V | 4 |
| Negative-going input threshold voltage | VIT- | 0.8 | | 1.5 | V | VCC=5V | 4 |
| Hysteresis voltage | Vhys | | 0.4 | | V | | 4 |
| Input resistance | ri | 3 | 5 | 7 | kΩ | VI=±3V to ±25V | 4 |
| ESD HBM, RS-232 pins | V(ESD) | -15 | | 15 | kV | human body model | 4 |
| ESD MM, RS-232 pins | V(ESD) | -800 | | 800 | V | machine model | 4 |
| ESD contact discharge, RS-232 pins | V(ESD) | -10 | | 10 | kV | IEC 61000-4-2 contact discharge | 4 |
| ESD air discharge, RS-232 pins | V(ESD) | -15 | | 15 | kV | IEC 61000-4-2 air discharge | 4 |
| ESD HBM, other pins | V(ESD) | -4 | | 4 | kV | human body model | 4 |
| ESD MM, other pins | V(ESD) | -400 | | 400 | V | machine model | 4 |
| Maximum data rate | FMAX | | | 250 | kbps | RL=3kΩ, CL=1000pF | 5 |
| Driver output skew | tsk(p) | | | 100 | ns | RL=3kΩ to 7kΩ, CL=150pF to 2500pF | 5 |
| Driver slew rate | SR(tr) | 6 | | 30 | V/µs | RL=3kΩ to 7kΩ, VCC=3.3V, CL=150pF to 1000pF | 5 |
| Driver slew rate | SR(tr) | 4 | | 30 | V/µs | RL=3kΩ to 7kΩ, CL=150pF to 2500pF | 5 |
| Receiver output propagation delay low to high | tPLH | | | 150 | ns | CL=150pF | 5 |
| Receiver output propagation delay high to low | tPHL | | | 150 | ns | CL=150pF | 5 |
| Receiver output skew | tsk(p) | | | 60 | ns | | 5 |
## CAD (KiCad official)
- Symbol: `MAX3232AEIMT`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `max3232aeimt-etched.step` / `max3232aeimt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3232aeimt.step` / `max3232aeimt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/max3232aeimt-datasheet.pdf) (13 pp, sha256 `2fc99b2b792e329a`, retrieved 2026-11-10, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3232aeimt-datasheet.pdf)