main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max3232aeimt: viewers rendered from the public page · Ray
max3232aeimt-etched.glb Publish 0.1.0 · Ray
max3232aeimt-etched.step max3232aeimt: factory component page (tier=lcsc) · Ray
max3232aeimt-hero.glb max3232aeimt: hero GLB from the etched model (keeps the MPN mark) · Ray
max3232aeimt-hero.overlay.json Publish 0.1.0 · Ray
max3232aeimt.glb Publish 0.1.0 · Ray
max3232aeimt.kicad_mod Publish 0.1.0 · Ray
max3232aeimt.kicad_sym Publish 0.1.0 · Ray
max3232aeimt.lbr Publish 0.1.0 · Ray
max3232aeimt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

MAX3232AEIMT

HGSEMI · RS232 ICs · TSSOP-16

MAX3232AEIMT from HGSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor, with C1 specified at 0.1 µF for VCC 3.3 V ±0.3 V or 0.047 µF for VCC 5 V ±0.5 V.
2 V+ power_out Positive charge-pump output generated on-chip; V+ may go up to 7 V maximum, and V+ minus V- must not exceed 13 V.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor, connected to C1+ through the external C1 capacitor.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor, with C2 specified at 0.1 µF for 3.3 V or 0.33 µF for 5 V operation.
5 C2- passive Negative terminal of the inverting charge-pump capacitor, connected to C2+ through the external C2 capacitor.
6 V- power_out Negative charge-pump output generated on-chip; V- may go down to -7 V minimum, and V+ minus V- must not exceed 13 V.
7 DOUT2 output RS-232 driver output with a limit of -13.2 V to 13.2 V and short-to-ground protection.
8 RIN2 input RS-232 receiver input with an input voltage range of -25 V to 25 V.
9 ROUT2 output TTL/CMOS receiver output with an absolute range of -0.3 V to VCC + 0.3 V.
10 DIN2 input TTL/CMOS driver input with a high level of 2.0 V minimum at 3.3 V (2.4 V at 5 V), a low level of 0.8 V maximum, and an absolute maximum of +6 V.
11 DIN1 input TTL/CMOS driver input with a high level of 2.0 V minimum at 3.3 V (2.4 V at 5 V), a low level of 0.8 V maximum, and an absolute maximum of +6 V.
12 ROUT1 output TTL/CMOS receiver output with an absolute range of -0.3 V to VCC + 0.3 V.
13 RIN1 input RS-232 receiver input with an input voltage range of -25 V to 25 V.
14 DOUT1 output RS-232 driver output with a limit of -13.2 V to 13.2 V and short-to-ground protection.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply pin for 3.0 V to 5.5 V operation, with an absolute maximum of 6 V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package TSSOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 3 3.3 3.6 V VCC=3.3V 4
Supply voltage VCC 4.5 5 5.5 V VCC=5V 4
Driver input high voltage VIH 2 5.5 V DIN, VCC=3.3V 4
Driver input high voltage VIH 2.4 5.5 V DIN, VCC=5V 4
Driver input low voltage VIL 0 0.8 V DIN 4
Receiver input voltage VI -25 25 V RIN 4
Operating temperature range TA -40 85 ℃ MAX3232AEI 4
Supply voltage VCC 6 V 3
Positive charge pump output voltage V+ -0.3 7 V note 2 3
Negative charge pump output voltage V- -7 -0.3 V note 1 3
Driver output voltage V+ to V- V+ to V- 13 V note 2 3
Driver input voltage VI -0.3 6 V DIN 3
Receiver input voltage VI -25 25 V RIN 3
Driver output voltage VO -13.2 13.2 V DOUT 3
Receiver output voltage VO -0.3 V ROUT, max VCC+0.3 V 3
Storage temperature Tstg -65 150 ℃ 3
Junction temperature TJ 150 ℃ 3
Soldering temperature, 10 s TLEAD 260 ℃ 10S 3
Supply current ICC 1 mA no load, VCC=3.3V or 5.0V, TA=25℃ 4
Driver output high voltage VOH 5 5.4 V DOUT load RL=3kΩ, DIN=GND 4
Driver output low voltage VOL -5.4 -5 V DOUT load RL=3kΩ, DIN=VCC 4
Driver input high level input current IIH -1 1 µA VI=VCC 4
Driver input low level input current IIL -1 1 µA VI tied to GND 4
Driver short-circuit output current IOS -35 35 mA VCC=3.6V, VO=0V 4
Driver short-circuit output current IOS -60 60 mA VCC=5.5V, VO=0V 4
Driver output impedance ro 300 Ω VCC, V+ and V- =0V, VO=±2V 4
Driver output impedance ro 10 MΩ VCC, V+ and V- =0V, VO=±2V 4
Receiver output low voltage VOL 0.4 mV IOL=1.6mA 4
Positive-going input threshold voltage VIT+ 1.5 2.4 V VCC=3.3V 4
Positive-going input threshold voltage VIT+ 2 2.4 V VCC=5V 4
Negative-going input threshold voltage VIT- 0.6 1.1 V VCC=3.3V 4
Negative-going input threshold voltage VIT- 0.8 1.5 V VCC=5V 4
Hysteresis voltage Vhys 0.4 V 4
Input resistance ri 3 5 7 kΩ VI=±3V to ±25V 4
ESD HBM, RS-232 pins V(ESD) -15 15 kV human body model 4
ESD MM, RS-232 pins V(ESD) -800 800 V machine model 4
ESD contact discharge, RS-232 pins V(ESD) -10 10 kV IEC 61000-4-2 contact discharge 4
ESD air discharge, RS-232 pins V(ESD) -15 15 kV IEC 61000-4-2 air discharge 4
ESD HBM, other pins V(ESD) -4 4 kV human body model 4
ESD MM, other pins V(ESD) -400 400 V machine model 4
Maximum data rate FMAX 250 kbps RL=3kΩ, CL=1000pF 5
Driver output skew tsk(p) 100 ns RL=3kΩ to 7kΩ, CL=150pF to 2500pF 5
Driver slew rate SR(tr) 6 30 V/µs RL=3kΩ to 7kΩ, VCC=3.3V, CL=150pF to 1000pF 5
Driver slew rate SR(tr) 4 30 V/µs RL=3kΩ to 7kΩ, CL=150pF to 2500pF 5
Receiver output propagation delay low to high tPLH 150 ns CL=150pF 5
Receiver output propagation delay high to low tPHL 150 ns CL=150pF 5
Receiver output skew tsk(p) 60 ns 5

CAD (KiCad official)

  • Symbol: MAX3232AEIMT
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: max3232aeimt-etched.step / max3232aeimt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232aeimt.step / max3232aeimt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (13 pp, sha256 2fc99b2b792e329a, retrieved 2026-11-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF