main
Ray Publish 0.1.0 d96c55a
{
  "slug": "max3222ipwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "max3222ipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3222ipwr.kicad_sym",
    "max3222ipwr.kicad_mod",
    "max3222ipwr.glb",
    "max3222ipwr.step",
    "max3222ipwr.lbr",
    "docs/hero.png",
    "docs/max3222ipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max3222ipwr-hero.glb",
    "max3222ipwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "MAX3222IPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/max3222",
    "parts": {
      "symbol": "max3222ipwr.kicad_sym",
      "footprint": "max3222ipwr.kicad_mod",
      "model_3d": "max3222ipwr-hero.glb",
      "model_3d_plain": "max3222ipwr.glb",
      "model_3d_step": "max3222ipwr-etched.step",
      "model_3d_step_plain": "max3222ipwr.step",
      "lbr": "max3222ipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2670999",
      "digikey": "296-13087-2-ND",
      "mouser": "595-MAX3222IPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T04:31:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-13087-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-MAX3222IPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Receiver enable, active low: EN low turns on both ROUT outputs, and EN high puts both ROUT pins into the high-impedance state; EN must be valid high or low and must not float."
      },
      {
        "number": "2",
        "name": "C1+",
        "type": "passive",
        "description": "Charge pump capacitor pin; C1 is connected between C1+ and C1−, with 0.1 µF at VCC = 3.3 V ± 0.3 V or 0.047 µF at VCC = 5 V ± 0.5 V per Table 3."
      },
      {
        "number": "3",
        "name": "V+",
        "type": "power_in",
        "description": "Charge pump capacitor pin for the positive output supply; the datasheet lists the V+ pin as a charge pump capacitor connection with no I/O class given, and it is lowered to VCC during power down."
      },
      {
        "number": "4",
        "name": "C1-",
        "type": "passive",
        "description": "Charge pump capacitor pin, connected to the other terminal of the C1 flying capacitor."
      },
      {
        "number": "5",
        "name": "C2+",
        "type": "passive",
        "description": "Charge pump capacitor pin; C2 is connected between C2+ and C2−, with 0.33 µF at VCC = 5 V ± 0.5 V or 0.1 µF at VCC = 3.3 V ± 0.3 V per Table 3."
      },
      {
        "number": "6",
        "name": "C2-",
        "type": "passive",
        "description": "Charge pump capacitor pin, connected to the other terminal of the C2 flying capacitor."
      },
      {
        "number": "7",
        "name": "V-",
        "type": "power_in",
        "description": "Charge pump capacitor pin for the negative output supply; the datasheet lists V− as a charge pump capacitor connection with no I/O class given, and it is raised toward GND during power down."
      },
      {
        "number": "8",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver output 2; RS-232 levels per TIA/EIA-232-F, held in the high-impedance state when PWRDOWN is low."
      },
      {
        "number": "9",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver input 2; the receiver input accepts ±25 V per the Recommended Operating Conditions and includes an internal standard RS-232 load."
      },
      {
        "number": "10",
        "name": "ROUT2",
        "type": "output",
        "description": "Receiver logic output 2; an open RIN2 input results in a high ROUT2 output, and ROUT2 is high impedance when EN is high."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "12",
        "name": "DIN2",
        "type": "input",
        "description": "Driver logic input 2; must be valid high or low and must not be left floating."
      },
      {
        "number": "13",
        "name": "DIN1",
        "type": "input",
        "description": "Driver logic input 1; must be valid high or low and must not be left floating."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "15",
        "name": "ROUT1",
        "type": "output",
        "description": "Receiver logic output 1; an open RIN1 input results in a high ROUT1 output, and ROUT1 is high impedance when EN is high."
      },
      {
        "number": "16",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver input 1; the receiver input accepts ±25 V per the Recommended Operating Conditions and includes an internal standard RS-232 load."
      },
      {
        "number": "17",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver output 1; RS-232 levels per TIA/EIA-232-F, held in the high-impedance state when PWRDOWN is low."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; the layout guidelines call for low impedance from this pin to the board ground plane for best ESD performance."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply; VCC should be between 3 V and 5.5 V (3.3 V or 5 V recommended)."
      },
      {
        "number": "20",
        "name": "PWRDOWN",
        "type": "input",
        "description": "Driver disable, active low: PWRDOWN low turns the drivers off (high impedance) and draws only 1 µA from the supply, and PWRDOWN must be valid high or low and must not float."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table gives I/O as '—' for V+ and V-. They are typed passive here because they are; The datasheet lists NC as pins 11 and 14 together. They are split into two separate entries here, bo; Capacitor values in the pin descriptions are taken from Table 3 (design requirements), not from the "
        ],
        "pages_sent": 29,
        "cost_usd": 0.0982,
        "at": "2026-10-12T04:31:27"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/max3222",
        "pages": 29,
        "sha256": "7d758e2084f5e5d4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3222ipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3222ipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9c050e30c0acf37f1d10a102f7de676a84f9302fc02429a3fef65e1b883e8033",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}