Generated by kicad-footprint-generator · KiCad file format 20260206
MAX3222IPWR
Texas Instruments · RS232 ICs · TSSOP-20
MAX3222IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Receiver enable, active low: EN low turns on both ROUT outputs, and EN high puts both ROUT pins into the high-impedance state; EN must be valid high or low and must not float. |
| 2 | C1+ | passive | Charge pump capacitor pin; C1 is connected between C1+ and C1−, with 0.1 µF at VCC = 3.3 V ± 0.3 V or 0.047 µF at VCC = 5 V ± 0.5 V per Table 3. |
| 3 | V+ | power_in | Charge pump capacitor pin for the positive output supply; the datasheet lists the V+ pin as a charge pump capacitor connection with no I/O class given, and it is lowered to VCC during power down. |
| 4 | C1- | passive | Charge pump capacitor pin, connected to the other terminal of the C1 flying capacitor. |
| 5 | C2+ | passive | Charge pump capacitor pin; C2 is connected between C2+ and C2−, with 0.33 µF at VCC = 5 V ± 0.5 V or 0.1 µF at VCC = 3.3 V ± 0.3 V per Table 3. |
| 6 | C2- | passive | Charge pump capacitor pin, connected to the other terminal of the C2 flying capacitor. |
| 7 | V- | power_in | Charge pump capacitor pin for the negative output supply; the datasheet lists V− as a charge pump capacitor connection with no I/O class given, and it is raised toward GND during power down. |
| 8 | DOUT2 | output | RS-232 driver output 2; RS-232 levels per TIA/EIA-232-F, held in the high-impedance state when PWRDOWN is low. |
| 9 | RIN2 | input | RS-232 receiver input 2; the receiver input accepts ±25 V per the Recommended Operating Conditions and includes an internal standard RS-232 load. |
| 10 | ROUT2 | output | Receiver logic output 2; an open RIN2 input results in a high ROUT2 output, and ROUT2 is high impedance when EN is high. |
| 11 | NC | unconnected | No internal connection. |
| 12 | DIN2 | input | Driver logic input 2; must be valid high or low and must not be left floating. |
| 13 | DIN1 | input | Driver logic input 1; must be valid high or low and must not be left floating. |
| 14 | NC | unconnected | No internal connection. |
| 15 | ROUT1 | output | Receiver logic output 1; an open RIN1 input results in a high ROUT1 output, and ROUT1 is high impedance when EN is high. |
| 16 | RIN1 | input | RS-232 receiver input 1; the receiver input accepts ±25 V per the Recommended Operating Conditions and includes an internal standard RS-232 load. |
| 17 | DOUT1 | output | RS-232 driver output 1; RS-232 levels per TIA/EIA-232-F, held in the high-impedance state when PWRDOWN is low. |
| 18 | GND | power_in | Ground reference for the device; the layout guidelines call for low impedance from this pin to the board ground plane for best ESD performance. |
| 19 | VCC | power_in | Power supply; VCC should be between 3 V and 5.5 V (3.3 V or 5 V recommended). |
| 20 | PWRDOWN | input | Driver disable, active low: PWRDOWN low turns the drivers off (high impedance) and draws only 1 µA from the supply, and PWRDOWN must be valid high or low and must not float. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
MAX3222IPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
max3222ipwr-etched.step/max3222ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3222ipwr.step/max3222ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
7d758e2084f5e5d4, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).